[PATCH 0/4] device_type/compatible cleanups

[PATCH 0/4] device_type/compatible cleanups

[Anton Vorontsov]

Hi all,

Here are few cleanups purposed by David Gibson and Scott Wood:
http://ozlabs.org/pipermail/linuxppc-dev/2007-December/048388.html

Patches are well split and bisect-able.

Scott, I didn't add "fsl,cpm-muram" stuff, it just doesn't make
sense now: qe and cpm anyway using different code base.

Thanks,

-- 
Anton Vorontsov
email: cbou@mail.ru
backup email: ya-cbou@yandex.ru
irc://irc.freenode.net/bd2

Re: [PATCH 0/4] device_type/compatible cleanups

[Scott Wood]

Anton Vorontsov wrote:
> Scott, I didn't add "fsl,cpm-muram" stuff, it just doesn't make
> sense now: qe and cpm anyway using different code base.

That should change.

-Scott

Re: [PATCH 0/4] device_type/compatible cleanups

[Anton Vorontsov]

On Wed, Dec 19, 2007 at 02:34:28PM -0600, Scott Wood wrote:
> Anton Vorontsov wrote:
> >Scott, I didn't add "fsl,cpm-muram" stuff, it just doesn't make
> >sense now: qe and cpm anyway using different code base.
> 
> That should change.

Sure. When that will change, then it will be sane to change the users,
I think. ;-) Not the vice versa.

-- 
Anton Vorontsov
email: cbou@mail.ru
backup email: ya-cbou@yandex.ru
irc://irc.freenode.net/bd2

Re: [PATCH 0/4] device_type/compatible cleanups

[Scott Wood]

Anton Vorontsov wrote:
> On Wed, Dec 19, 2007 at 02:34:28PM -0600, Scott Wood wrote:
>> Anton Vorontsov wrote:
>>> Scott, I didn't add "fsl,cpm-muram" stuff, it just doesn't make
>>> sense now: qe and cpm anyway using different code base.
>> That should change.
> 
> Sure. When that will change, then it will be sane to change the users,
> I think. ;-) Not the vice versa.

The device tree should describe the hardware, not the degree of 
unnecessary code forking/duplication currently present in Linux.

-Scott

[PATCH 1/4] [POWERPC] qe_lib and users: get rid of device_type and model

[Anton Vorontsov]

Now we're searching for "fsl,qe", "fsl,qe-muram", "fsl,qe-muram-data".

Per http://ozlabs.org/pipermail/linuxppc-dev/2007-December/048388.html

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 arch/powerpc/boot/dts/mpc832x_mds.dts |    6 +++---
 arch/powerpc/boot/dts/mpc832x_rdb.dts |    6 +++---
 arch/powerpc/boot/dts/mpc836x_mds.dts |    6 +++---
 arch/powerpc/boot/dts/mpc8568mds.dts  |    6 +++---
 arch/powerpc/sysdev/fsl_soc.c         |    2 +-
 arch/powerpc/sysdev/qe_lib/qe.c       |    7 ++++---
 6 files changed, 17 insertions(+), 16 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 26ac467..ef8cd1e 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -175,18 +175,18 @@
 	qe@e0100000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		device_type = "qe";
-		model = "QE";
+		compatible = "fsl,qe";
 		ranges = <0 e0100000 00100000>;
 		reg = <e0100000 480>;
 		brg-frequency = <0>;
 		bus-frequency = <BCD3D80>;
 
 		muram@10000 {
-			device_type = "muram";
+			compatible = "fsl,qe-muram";
 			ranges = <0 00010000 00004000>;
 
 			data-only@0 {
+				compatible = "fsl,qe-muram-data";
 				reg = <0 4000>;
 			};
 		};
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 10ff7aa..7c4f028 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -165,18 +165,18 @@
 	qe@e0100000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		device_type = "qe";
-		model = "QE";
+		compatible = "fsl,qe";
 		ranges = <0 e0100000 00100000>;
 		reg = <e0100000 480>;
 		brg-frequency = <0>;
 		bus-frequency = <BCD3D80>;
 
 		muram@10000 {
-			device_type = "muram";
+			compatible = "fsl,qe-muram";
 			ranges = <0 00010000 00004000>;
 
 			data-only@0 {
+				compatible = "fsl,qe-muram-data";
 				reg = <0 4000>;
 			};
 		};
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index fd841b2..5c73786 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -206,18 +206,18 @@
 	qe@e0100000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		device_type = "qe";
-		model = "QE";
+		compatible = "fsl,qe";
 		ranges = <0 e0100000 00100000>;
 		reg = <e0100000 480>;
 		brg-frequency = <0>;
 		bus-frequency = <179A7B00>;
 
 		muram@10000 {
-			device_type = "muram";
+			device_type = "fsl,qe-muram";
 			ranges = <0 00010000 0000c000>;
 
 			data-only@0{
+				device_type = "fsl,qe-muram-data";
 				reg = <0 c000>;
 			};
 		};
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 5818a7c..7ad4b9f 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -283,18 +283,18 @@
 	qe@e0080000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		device_type = "qe";
-		model = "QE";
+		compatible = "fsl,qe";
 		ranges = <0 e0080000 00040000>;
 		reg = <e0080000 480>;
 		brg-frequency = <0>;
 		bus-frequency = <179A7B00>;
 
 		muram@10000 {
-			device_type = "muram";
+			compatible = "fsl,qe-muram";
 			ranges = <0 00010000 0000c000>;
 
 			data-only@0{
+				compatible = "fsl,qe-muram-data";
 				reg = <0 c000>;
 			};
 		};
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 4baad80..044dd7f 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -1226,7 +1226,7 @@ int __init fsl_spi_init(struct spi_board_info *board_infos,
 	const u32 *sysclk;
 
 	/* SPI controller is either clocked from QE or SoC clock */
-	np = of_find_node_by_type(NULL, "qe");
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
 	if (!np)
 		np = of_find_node_by_type(NULL, "soc");
 
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 21e0106..4af71e1 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -68,7 +68,7 @@ phys_addr_t get_qe_base(void)
 	if (qebase != -1)
 		return qebase;
 
-	qe = of_find_node_by_type(NULL, "qe");
+	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
 	if (qe) {
 		unsigned int size;
 		const void *prop = of_get_property(qe, "reg", &size);
@@ -155,7 +155,7 @@ unsigned int get_brg_clk(void)
 	if (brg_clk)
 		return brg_clk;
 
-	qe = of_find_node_by_type(NULL, "qe");
+	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
 	if (qe) {
 		unsigned int size;
 		const u32 *prop = of_get_property(qe, "brg-frequency", &size);
@@ -334,7 +334,8 @@ static void qe_muram_init(void)
 	/* XXX: This is a subset of the available muram. It
 	 * varies with the processor and the microcode patches activated.
 	 */
-	if ((np = of_find_node_by_name(NULL, "data-only")) != NULL) {
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe-muram-data");
+	if (np) {
 		address = *of_get_address(np, 0, &size, &flags);
 		of_node_put(np);
 		rh_attach_region(&qe_muram_info, address, (int) size);
-- 
1.5.2.2

[PATCH 2/4] [POWERPC][NET] ucc_geth_mii and users: get rid of device_type

[Anton Vorontsov]

device_type property is bogus, better use proper compatible property.

Also change compatible to "fsl,ucc-mdio".

Per http://ozlabs.org/pipermail/linuxppc-dev/2007-December/048388.html

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 arch/powerpc/boot/dts/mpc832x_mds.dts |    3 +--
 arch/powerpc/boot/dts/mpc832x_rdb.dts |    3 +--
 arch/powerpc/boot/dts/mpc836x_mds.dts |    3 +--
 arch/powerpc/boot/dts/mpc8568mds.dts  |    2 +-
 drivers/net/ucc_geth_mii.c            |    3 +--
 5 files changed, 5 insertions(+), 9 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index ef8cd1e..97757ed 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -254,8 +254,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2320 18>;
-			device_type = "mdio";
-			compatible = "ucc_geth_phy";
+			compatible = "fsl,ucc-mdio";
 
 			phy3: ethernet-phy@03 {
 				interrupt-parent = < &ipic >;
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 7c4f028..b1c73f1 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -235,8 +235,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3120 18>;
-			device_type = "mdio";
-			compatible = "ucc_geth_phy";
+			compatible = "fsl,ucc-mdio";
 
 			phy00:ethernet-phy@00 {
 				interrupt-parent = <&pic>;
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 5c73786..330212d 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -287,8 +287,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2120 18>;
-			device_type = "mdio";
-			compatible = "ucc_geth_phy";
+			compatible = "fsl,ucc-mdio";
 
 			phy0: ethernet-phy@00 {
 				interrupt-parent = < &ipic >;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 7ad4b9f..c00aec9 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -355,7 +355,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2120 18>;
-			compatible = "ucc_geth_phy";
+			compatible = "fsl,ucc-mdio";
 
 			/* These are the same PHYs as on
 			 * gianfar's MDIO bus */
diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c
index df884f0..de8ba1f 100644
--- a/drivers/net/ucc_geth_mii.c
+++ b/drivers/net/ucc_geth_mii.c
@@ -253,8 +253,7 @@ int uec_mdio_remove(struct of_device *ofdev)
 
 static struct of_device_id uec_mdio_match[] = {
 	{
-		.type = "mdio",
-		.compatible = "ucc_geth_phy",
+		.compatible = "fsl,ucc-mdio",
 	},
 	{},
 };
-- 
1.5.2.2

[PATCH 3/4] [POWERPC][SPI] use brg-frequency for SPI in QE

[Anton Vorontsov]

In case of QE we can use brg-frequency (which is qeclk/2).
Thus no need to divide sysclk in the spi_mpc83xx.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 arch/powerpc/sysdev/fsl_soc.c |   18 +++++++++++-------
 drivers/spi/spi_mpc83xx.c     |    6 +-----
 2 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 044dd7f..3cf84d0 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -1227,15 +1227,19 @@ int __init fsl_spi_init(struct spi_board_info *board_infos,
 
 	/* SPI controller is either clocked from QE or SoC clock */
 	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
-	if (!np)
+	if (np) {
+		sysclk = of_get_property(np, "brg-frequency", NULL);
+		if (!sysclk)
+			return -ENODEV;
+	} else {
 		np = of_find_node_by_type(NULL, "soc");
+		if (!np)
+			return -ENODEV;
 
-	if (!np)
-		return -ENODEV;
-
-	sysclk = of_get_property(np, "bus-frequency", NULL);
-	if (!sysclk)
-		return -ENODEV;
+		sysclk = of_get_property(np, "bus-frequency", NULL);
+		if (!sysclk)
+			return -ENODEV;
+	}
 
 	for (np = NULL, i = 1;
 	     (np = of_find_compatible_node(np, "spi", "fsl_spi")) != NULL;
diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c
index 4580b9c..04f7cd9 100644
--- a/drivers/spi/spi_mpc83xx.c
+++ b/drivers/spi/spi_mpc83xx.c
@@ -436,11 +436,7 @@ static int __init mpc83xx_spi_probe(struct platform_device *dev)
 	mpc83xx_spi->qe_mode = pdata->qe_mode;
 	mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u8;
 	mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u8;
-
-	if (mpc83xx_spi->qe_mode)
-		mpc83xx_spi->spibrg = pdata->sysclk / 2;
-	else
-		mpc83xx_spi->spibrg = pdata->sysclk;
+	mpc83xx_spi->spibrg = pdata->sysclk;
 
 	mpc83xx_spi->rx_shift = 0;
 	mpc83xx_spi->tx_shift = 0;
-- 
1.5.2.2

Re: [PATCH 3/4] [POWERPC][SPI] use brg-frequency for SPI in QE

[Scott Wood]

Anton Vorontsov wrote:
> diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
> index 044dd7f..3cf84d0 100644
> --- a/arch/powerpc/sysdev/fsl_soc.c
> +++ b/arch/powerpc/sysdev/fsl_soc.c
> @@ -1227,15 +1227,19 @@ int __init fsl_spi_init(struct spi_board_info *board_infos,
>  
>  	/* SPI controller is either clocked from QE or SoC clock */
>  	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
> -	if (!np)
> +	if (np) {
> +		sysclk = of_get_property(np, "brg-frequency", NULL);
> +		if (!sysclk)
> +			return -ENODEV;
> +	} else {

You should use get_brgfreq() instead (and fix the legacy match to find 
qe as well as soc nodes).

-Scott

Re: [PATCH 3/4] [POWERPC][SPI] use brg-frequency for SPI in QE

[Stephen Rothwell]

[-- Attachment #1: Type: text/plain, Size: 1093 bytes --]

On Wed, 19 Dec 2007 23:38:05 +0300 Anton Vorontsov <avorontsov@ru.mvista.com> wrote:
>
> +++ b/arch/powerpc/sysdev/fsl_soc.c
> @@ -1227,15 +1227,19 @@ int __init fsl_spi_init(struct spi_board_info *board_infos,
>  
>  	/* SPI controller is either clocked from QE or SoC clock */
>  	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
> -	if (!np)
> +	if (np) {
> +		sysclk = of_get_property(np, "brg-frequency", NULL);
> +		if (!sysclk)
> +			return -ENODEV;

You need an of_node_put(np) in the failing case.

> +	} else {
>  		np = of_find_node_by_type(NULL, "soc");
> +		if (!np)
> +			return -ENODEV;
>  
> -	if (!np)
> -		return -ENODEV;
> -
> -	sysclk = of_get_property(np, "bus-frequency", NULL);
> -	if (!sysclk)
> -		return -ENODEV;
> +		sysclk = of_get_property(np, "bus-frequency", NULL);
> +		if (!sysclk)
> +			return -ENODEV;

And again.

> +	}
>  
>  	for (np = NULL, i = 1;

There should be an of_node_put(np) before this as well.

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

[PATCH 4/4] [POWERPC] fsl_spi_init and users: stop using device_type = "spi"

[Anton Vorontsov]

Also rename "fsl_spi" to "fsl,spi".

Per http://ozlabs.org/pipermail/linuxppc-dev/2007-December/048388.html

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 arch/powerpc/boot/dts/mpc8313erdb.dts    |    3 +--
 arch/powerpc/boot/dts/mpc832x_mds.dts    |    6 ++----
 arch/powerpc/boot/dts/mpc832x_rdb.dts    |    6 ++----
 arch/powerpc/boot/dts/mpc8349emitx.dts   |    3 +--
 arch/powerpc/boot/dts/mpc8349emitxgp.dts |    3 +--
 arch/powerpc/boot/dts/mpc834x_mds.dts    |    3 +--
 arch/powerpc/boot/dts/mpc836x_mds.dts    |    6 ++----
 arch/powerpc/boot/dts/mpc8568mds.dts     |    6 ++----
 arch/powerpc/sysdev/fsl_soc.c            |    2 +-
 9 files changed, 13 insertions(+), 25 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index c5b6665..127cf57 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -82,8 +82,7 @@
 		};
 
 		spi@7000 {
-			device_type = "spi";
-			compatible = "fsl_spi";
+			compatible = "fsl,spi";
 			reg = <7000 1000>;
 			interrupts = <10 8>;
 			interrupt-parent = < &ipic >;
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 97757ed..517e433 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -192,8 +192,7 @@
 		};
 
 		spi@4c0 {
-			device_type = "spi";
-			compatible = "fsl_spi";
+			compatible = "fsl,spi";
 			reg = <4c0 40>;
 			interrupts = <2>;
 			interrupt-parent = < &qeic >;
@@ -201,8 +200,7 @@
 		};
 
 		spi@500 {
-			device_type = "spi";
-			compatible = "fsl_spi";
+			compatible = "fsl,spi";
 			reg = <500 40>;
 			interrupts = <1>;
 			interrupt-parent = < &qeic >;
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index b1c73f1..a229fab 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -182,8 +182,7 @@
 		};
 
 		spi@4c0 {
-			device_type = "spi";
-			compatible = "fsl_spi";
+			compatible = "fsl,spi";
 			reg = <4c0 40>;
 			interrupts = <2>;
 			interrupt-parent = <&qeic>;
@@ -191,8 +190,7 @@
 		};
 
 		spi@500 {
-			device_type = "spi";
-			compatible = "fsl_spi";
+			compatible = "fsl,spi";
 			reg = <500 40>;
 			interrupts = <1>;
 			interrupt-parent = <&qeic>;
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index e354f26..b89dbbf 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -82,8 +82,7 @@
 		};
 
 		spi@7000 {
-			device_type = "spi";
-			compatible = "fsl_spi";
+			compatible = "fsl,spi";
 			reg = <7000 1000>;
 			interrupts = <10 8>;
 			interrupt-parent = < &ipic >;
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index ebdf0b7..123c34e 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -80,8 +80,7 @@
 		};
 
 		spi@7000 {
-			device_type = "spi";
-			compatible = "fsl_spi";
+			compatible = "fsl,spi";
 			reg = <7000 1000>;
 			interrupts = <10 8>;
 			interrupt-parent = < &ipic >;
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index 0ba13eb..eb532f3 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -93,8 +93,7 @@
 		};
 
 		spi@7000 {
-			device_type = "spi";
-			compatible = "fsl_spi";
+			compatible = "fsl,spi";
 			reg = <7000 1000>;
 			interrupts = <10 8>;
 			interrupt-parent = < &ipic >;
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 330212d..decbafe 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -223,8 +223,7 @@
 		};
 
 		spi@4c0 {
-			device_type = "spi";
-			compatible = "fsl_spi";
+			compatible = "fsl,spi";
 			reg = <4c0 40>;
 			interrupts = <2>;
 			interrupt-parent = < &qeic >;
@@ -232,8 +231,7 @@
 		};
 
 		spi@500 {
-			device_type = "spi";
-			compatible = "fsl_spi";
+			compatible = "fsl,spi";
 			reg = <500 40>;
 			interrupts = <1>;
 			interrupt-parent = < &qeic >;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index c00aec9..2b79f8b 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -300,8 +300,7 @@
 		};
 
 		spi@4c0 {
-			device_type = "spi";
-			compatible = "fsl_spi";
+			compatible = "fsl,spi";
 			reg = <4c0 40>;
 			interrupts = <2>;
 			interrupt-parent = <&qeic>;
@@ -309,8 +308,7 @@
 		};
 
 		spi@500 {
-			device_type = "spi";
-			compatible = "fsl_spi";
+			compatible = "fsl,spi";
 			reg = <500 40>;
 			interrupts = <1>;
 			interrupt-parent = <&qeic>;
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 3cf84d0..91bac51 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -1242,7 +1242,7 @@ int __init fsl_spi_init(struct spi_board_info *board_infos,
 	}
 
 	for (np = NULL, i = 1;
-	     (np = of_find_compatible_node(np, "spi", "fsl_spi")) != NULL;
+	     (np = of_find_compatible_node(np, NULL, "fsl,spi")) != NULL;
 	     i++) {
 		int ret = 0;
 		unsigned int j;
-- 
1.5.2.2

Re: [PATCH 4/4] [POWERPC] fsl_spi_init and users: stop using device_type = "spi"

[Kumar Gala]

On Dec 19, 2007, at 2:38 PM, Anton Vorontsov wrote:

> Also rename "fsl_spi" to "fsl,spi".
>
> Per http://ozlabs.org/pipermail/linuxppc-dev/2007-December/048388.html
>
> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
> ---
> arch/powerpc/boot/dts/mpc8313erdb.dts    |    3 +--
> arch/powerpc/boot/dts/mpc832x_mds.dts    |    6 ++----
> arch/powerpc/boot/dts/mpc832x_rdb.dts    |    6 ++----
> arch/powerpc/boot/dts/mpc8349emitx.dts   |    3 +--
> arch/powerpc/boot/dts/mpc8349emitxgp.dts |    3 +--
> arch/powerpc/boot/dts/mpc834x_mds.dts    |    3 +--
> arch/powerpc/boot/dts/mpc836x_mds.dts    |    6 ++----
> arch/powerpc/boot/dts/mpc8568mds.dts     |    6 ++----
> arch/powerpc/sysdev/fsl_soc.c            |    2 +-
> 9 files changed, 13 insertions(+), 25 deletions(-)


can you add cell-index as well.

- k

Re: [PATCH 4/4] [POWERPC] fsl_spi_init and users: stop using device_type = "spi"

[Anton Vorontsov]

On Wed, Dec 19, 2007 at 02:54:09PM -0600, Kumar Gala wrote:
> 
> On Dec 19, 2007, at 2:38 PM, Anton Vorontsov wrote:
> 
> >Also rename "fsl_spi" to "fsl,spi".
> >
> >Per http://ozlabs.org/pipermail/linuxppc-dev/2007-December/048388.html
> >
> >Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
> >---
> >arch/powerpc/boot/dts/mpc8313erdb.dts    |    3 +--
> >arch/powerpc/boot/dts/mpc832x_mds.dts    |    6 ++----
> >arch/powerpc/boot/dts/mpc832x_rdb.dts    |    6 ++----
> >arch/powerpc/boot/dts/mpc8349emitx.dts   |    3 +--
> >arch/powerpc/boot/dts/mpc8349emitxgp.dts |    3 +--
> >arch/powerpc/boot/dts/mpc834x_mds.dts    |    3 +--
> >arch/powerpc/boot/dts/mpc836x_mds.dts    |    6 ++----
> >arch/powerpc/boot/dts/mpc8568mds.dts     |    6 ++----
> >arch/powerpc/sysdev/fsl_soc.c            |    2 +-
> >9 files changed, 13 insertions(+), 25 deletions(-)
> 
> 
> can you add cell-index as well.

Sure. Will do tomorrow since here is night already. ;-)

Thanks,

-- 
Anton Vorontsov
email: cbou@mail.ru
backup email: ya-cbou@yandex.ru
irc://irc.freenode.net/bd2

Re: [PATCH 4/4] [POWERPC] fsl_spi_init and users: stop using device_type = "spi"

[Timur Tabi]

Anton Vorontsov wrote:

> diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
> index 3cf84d0..91bac51 100644
> --- a/arch/powerpc/sysdev/fsl_soc.c
> +++ b/arch/powerpc/sysdev/fsl_soc.c
> @@ -1242,7 +1242,7 @@ int __init fsl_spi_init(struct spi_board_info *board_infos,
>  	}
>  
>  	for (np = NULL, i = 1;
> -	     (np = of_find_compatible_node(np, "spi", "fsl_spi")) != NULL;
> +	     (np = of_find_compatible_node(np, NULL, "fsl,spi")) != NULL;

Can you keep the original code around to look for older device trees that are 
wrong?  Backwards compatibility is important.  I don't want to have to update 
the device tree just because I update the kernel.

-- 
Timur Tabi
Linux kernel developer at Freescale

Re: [PATCH 4/4] [POWERPC] fsl_spi_init and users: stop using device_type = "spi"

[Anton Vorontsov]

On Wed, Dec 19, 2007 at 03:04:51PM -0600, Timur Tabi wrote:
> Anton Vorontsov wrote:
> 
> >diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
> >index 3cf84d0..91bac51 100644
> >--- a/arch/powerpc/sysdev/fsl_soc.c
> >+++ b/arch/powerpc/sysdev/fsl_soc.c
> >@@ -1242,7 +1242,7 @@ int __init fsl_spi_init(struct spi_board_info 
> >*board_infos,
> > 	}
> > 
> > 	for (np = NULL, i = 1;
> >-	     (np = of_find_compatible_node(np, "spi", "fsl_spi")) != NULL;
> >+	     (np = of_find_compatible_node(np, NULL, "fsl,spi")) != NULL;
> 
> Can you keep the original code around to look for older device trees that 
> are wrong?  Backwards compatibility is important.  I don't want to have to 
> update the device tree just because I update the kernel.

I though about it. Is your device tree source out of tree? Otherwise
it should be trivial to upgrade the dtb, instead of producing cruft in
the kernel. I vote for less legacy code, but lets see what others will
say. So far count is 1:1. ;-)

Thanks,

-- 
Anton Vorontsov
email: cbou@mail.ru
backup email: ya-cbou@yandex.ru
irc://irc.freenode.net/bd2

Re: [PATCH 4/4] [POWERPC] fsl_spi_init and users: stop using device_type = "spi"

[Timur Tabi]

Anton Vorontsov wrote:

> I though about it. Is your device tree source out of tree? Otherwise
> it should be trivial to upgrade the dtb, instead of producing cruft in
> the kernel. I vote for less legacy code, but lets see what others will
> say. So far count is 1:1. ;-)

I just want a transition period.  Whenever I write code that works with changes 
in the device tree, I always maintain compatibility with the older versions, and 
I was under the impression that this is policy.  If you update the device tree, 
you should update the kernel.  The converse, however, should not be true.

It would be really annoying if you had to swap out your device tree if you want 
to work with different kernel versions.

Maybe if the device tree compiler were part of the kernel, and every time you 
built the kernel it also built the dtb, I could accept locking the device tree 
and kernel versions.

-- 
Timur Tabi
Linux kernel developer at Freescale

Re: [PATCH 4/4] [POWERPC] fsl_spi_init and users: stop using device_type = "spi"

[Grant Likely]

On 12/19/07, Anton Vorontsov <avorontsov@ru.mvista.com> wrote:
> On Wed, Dec 19, 2007 at 03:04:51PM -0600, Timur Tabi wrote:
> > Anton Vorontsov wrote:
> >
> > >diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
> > >index 3cf84d0..91bac51 100644
> > >--- a/arch/powerpc/sysdev/fsl_soc.c
> > >+++ b/arch/powerpc/sysdev/fsl_soc.c
> > >@@ -1242,7 +1242,7 @@ int __init fsl_spi_init(struct spi_board_info
> > >*board_infos,
> > >     }
> > >
> > >     for (np = NULL, i = 1;
> > >-         (np = of_find_compatible_node(np, "spi", "fsl_spi")) != NULL;
> > >+         (np = of_find_compatible_node(np, NULL, "fsl,spi")) != NULL;
> >
> > Can you keep the original code around to look for older device trees that
> > are wrong?  Backwards compatibility is important.  I don't want to have to
> > update the device tree just because I update the kernel.
>
> I though about it. Is your device tree source out of tree? Otherwise
> it should be trivial to upgrade the dtb, instead of producing cruft in
> the kernel. I vote for less legacy code, but lets see what others will
> say. So far count is 1:1. ;-)

I agree with Timur.  Please keep the test for the older names.  Some
platforms have the dtb in the same sector as u-boot, making it more
dangerous to reflash.

g.

> --
> Anton Vorontsov
> email: cbou@mail.ru
> backup email: ya-cbou@yandex.ru
> irc://irc.freenode.net/bd2
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>


-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
grant.likely@secretlab.ca
(403) 399-0195

Re: [PATCH 4/4] [POWERPC] fsl_spi_init and users: stop using device_type = "spi"

[Olof Johansson]

On Thu, Dec 20, 2007 at 12:12:50AM +0300, Anton Vorontsov wrote:

> I though about it. Is your device tree source out of tree? Otherwise
> it should be trivial to upgrade the dtb, instead of producing cruft in
> the kernel. I vote for less legacy code, but lets see what others will
> say. So far count is 1:1. ;-)

It's not just that. kexec:ing a new kernel from an older that has the
old device tree breaks if you don't consider older device trees. Or you
might have an old firmware with a flashed device tree that you need to
keep compatibility with.

You should either fix up the "broken" (not latest and greatest) device
trees in the wrapper before using them, or make sure that your code is
still compatible with the old trees.

The fact that the device tree source code is distributed with the kernel
isn't an excuse to break backwards compatibility with older versions.


-Olof

[PATCH v3 0/4] device_type/compatible cleanups

[Anton Vorontsov]

Hi all,

Here is the third version (let's hope the last :-).

Changes since v2:
- SPI conversion fixed and actually tested on MPC8323E-RDB to not
  break anything;
- Few more users of device_type = "qe" converted to
  compatible = "fsl,qe";
- Got Ack on SPI part from David.

Changes since v1:
- Device tree lookup changes should be backward compatible with
  older dtbs;
- Few of_put_node() cleanups;
- cell-index property added to spi nodes;
- cpm-muram{,-data} added as an addition to qe-muram{,-data}.


Thanks,

-- 
Anton Vorontsov
email: cbou@mail.ru
backup email: ya-cbou@yandex.ru
irc://irc.freenode.net/bd2

[PATCH 1/4] [POWERPC] qe_lib and users: get rid of device_type and model

[Anton Vorontsov]

Now we're searching for "fsl,qe", "fsl,qe-muram", "fsl,qe-muram-data".

Per http://ozlabs.org/pipermail/linuxppc-dev/2007-December/048388.html

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 arch/powerpc/boot/dts/mpc832x_mds.dts     |    7 ++++---
 arch/powerpc/boot/dts/mpc832x_rdb.dts     |    7 ++++---
 arch/powerpc/boot/dts/mpc836x_mds.dts     |    7 ++++---
 arch/powerpc/boot/dts/mpc8568mds.dts      |    7 ++++---
 arch/powerpc/platforms/83xx/mpc832x_mds.c |    1 +
 arch/powerpc/platforms/83xx/mpc832x_rdb.c |    1 +
 arch/powerpc/platforms/83xx/mpc836x_mds.c |    1 +
 arch/powerpc/platforms/85xx/mpc85xx_mds.c |    4 +++-
 arch/powerpc/sysdev/fsl_soc.c             |    5 ++++-
 arch/powerpc/sysdev/qe_lib/qe.c           |   16 +++++++++++++---
 10 files changed, 39 insertions(+), 17 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 26ac467..588d658 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -175,18 +175,19 @@
 	qe@e0100000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		device_type = "qe";
-		model = "QE";
+		compatible = "fsl,qe";
 		ranges = <0 e0100000 00100000>;
 		reg = <e0100000 480>;
 		brg-frequency = <0>;
 		bus-frequency = <BCD3D80>;
 
 		muram@10000 {
-			device_type = "muram";
+			compatible = "fsl,qe-muram", "fsl,cpm-muram";
 			ranges = <0 00010000 00004000>;
 
 			data-only@0 {
+				compatible = "fsl,qe-muram-data",
+					     "fsl,cpm-muram-data";
 				reg = <0 4000>;
 			};
 		};
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 10ff7aa..719f375 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -165,18 +165,19 @@
 	qe@e0100000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		device_type = "qe";
-		model = "QE";
+		compatible = "fsl,qe";
 		ranges = <0 e0100000 00100000>;
 		reg = <e0100000 480>;
 		brg-frequency = <0>;
 		bus-frequency = <BCD3D80>;
 
 		muram@10000 {
-			device_type = "muram";
+			compatible = "fsl,qe-muram", "fsl,cpm-muram";
 			ranges = <0 00010000 00004000>;
 
 			data-only@0 {
+				compatible = "fsl,qe-muram-data",
+					     "fsl,cpm-muram-data";
 				reg = <0 4000>;
 			};
 		};
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index fd841b2..8d7124e 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -206,18 +206,19 @@
 	qe@e0100000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		device_type = "qe";
-		model = "QE";
+		compatible = "fsl,qe";
 		ranges = <0 e0100000 00100000>;
 		reg = <e0100000 480>;
 		brg-frequency = <0>;
 		bus-frequency = <179A7B00>;
 
 		muram@10000 {
-			device_type = "muram";
+			device_type = "fsl,qe-muram", "fsl,cpm-muram";
 			ranges = <0 00010000 0000c000>;
 
 			data-only@0{
+				device_type = "fsl,qe-muram-data",
+					      "fsl,cpm-muram-data";
 				reg = <0 c000>;
 			};
 		};
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 5818a7c..89add8d 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -283,18 +283,19 @@
 	qe@e0080000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		device_type = "qe";
-		model = "QE";
+		compatible = "fsl,qe";
 		ranges = <0 e0080000 00040000>;
 		reg = <e0080000 480>;
 		brg-frequency = <0>;
 		bus-frequency = <179A7B00>;
 
 		muram@10000 {
-			device_type = "muram";
+			compatible = "fsl,qe-muram", "fsl,cpm-muram";
 			ranges = <0 00010000 0000c000>;
 
 			data-only@0{
+				compatible = "fsl,qe-muram-data",
+					     "fsl,cpm-muram-data";
 				reg = <0 c000>;
 			};
 		};
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index 1e570bb..516715e 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -105,6 +105,7 @@ static struct of_device_id mpc832x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
 	{ .type = "qe", },
+	{ .compatible = "fsl,qe", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index ffb2e93..a603def 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -118,6 +118,7 @@ static struct of_device_id mpc832x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
 	{ .type = "qe", },
+	{ .compatible = "fsl,qe", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index 2ac9890..eb64cba 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -136,6 +136,7 @@ static struct of_device_id mpc836x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
 	{ .type = "qe", },
+	{ .compatible = "fsl,qe", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index e6c63a5..a152bf8 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -94,7 +94,8 @@ static void __init mpc85xx_mds_setup_arch(void)
 #endif
 
 #ifdef CONFIG_QUICC_ENGINE
-	if ((np = of_find_node_by_name(NULL, "qe")) != NULL) {
+	np = of_find_node_by_name(NULL, "fsl,qe");
+	if (np) {
 		qe_reset();
 		of_node_put(np);
 	}
@@ -139,6 +140,7 @@ static struct of_device_id mpc85xx_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
 	{ .type = "qe", },
+	{ .compatible = "fsl,qe", },
 	{},
 };
 
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 4baad80..60d9c4e 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -1226,7 +1226,10 @@ int __init fsl_spi_init(struct spi_board_info *board_infos,
 	const u32 *sysclk;
 
 	/* SPI controller is either clocked from QE or SoC clock */
-	np = of_find_node_by_type(NULL, "qe");
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
+	if (!np)
+		np = of_find_node_by_type(NULL, "qe");
+
 	if (!np)
 		np = of_find_node_by_type(NULL, "soc");
 
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 21e0106..cd6cee3 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -68,7 +68,10 @@ phys_addr_t get_qe_base(void)
 	if (qebase != -1)
 		return qebase;
 
-	qe = of_find_node_by_type(NULL, "qe");
+	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+	if (!qe)
+		qe = of_find_node_by_type(NULL, "qe");
+
 	if (qe) {
 		unsigned int size;
 		const void *prop = of_get_property(qe, "reg", &size);
@@ -155,7 +158,10 @@ unsigned int get_brg_clk(void)
 	if (brg_clk)
 		return brg_clk;
 
-	qe = of_find_node_by_type(NULL, "qe");
+	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+	if (!qe)
+		qe = of_find_node_by_type(NULL, "qe");
+
 	if (qe) {
 		unsigned int size;
 		const u32 *prop = of_get_property(qe, "brg-frequency", &size);
@@ -334,7 +340,11 @@ static void qe_muram_init(void)
 	/* XXX: This is a subset of the available muram. It
 	 * varies with the processor and the microcode patches activated.
 	 */
-	if ((np = of_find_node_by_name(NULL, "data-only")) != NULL) {
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe-muram-data");
+	if (!np)
+		np = of_find_node_by_name(NULL, "data-only");
+
+	if (np) {
 		address = *of_get_address(np, 0, &size, &flags);
 		of_node_put(np);
 		rh_attach_region(&qe_muram_info, address, (int) size);
-- 
1.5.2.2

Re: [PATCH 1/4] [POWERPC] qe_lib and users: get rid of device_type and model

[Olof Johansson]

Hi,

On Fri, Dec 21, 2007 at 11:20:54PM +0300, Anton Vorontsov wrote:
> diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
> index e6c63a5..a152bf8 100644
> --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
> +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
> @@ -94,7 +94,8 @@ static void __init mpc85xx_mds_setup_arch(void)
>  #endif
>  
>  #ifdef CONFIG_QUICC_ENGINE
> -	if ((np = of_find_node_by_name(NULL, "qe")) != NULL) {
> +	np = of_find_node_by_name(NULL, "fsl,qe");
> +	if (np) {

That won't work. Did you mean of_find_compatible_node()? If so, you
still need to fall back to looking up by name for older device trees
that don't have the compatible field.


-Olof

Re: [PATCH 1/4] [POWERPC] qe_lib and users: get rid of device_type and model

[Anton Vorontsov]

On Fri, Dec 21, 2007 at 03:25:53PM -0600, Olof Johansson wrote:
> Hi,
> 
> On Fri, Dec 21, 2007 at 11:20:54PM +0300, Anton Vorontsov wrote:
> > diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
> > index e6c63a5..a152bf8 100644
> > --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
> > +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
> > @@ -94,7 +94,8 @@ static void __init mpc85xx_mds_setup_arch(void)
> >  #endif
> >  
> >  #ifdef CONFIG_QUICC_ENGINE
> > -	if ((np = of_find_node_by_name(NULL, "qe")) != NULL) {
> > +	np = of_find_node_by_name(NULL, "fsl,qe");
> > +	if (np) {
> 
> That won't work. Did you mean of_find_compatible_node()?

Yes. :-(

> If so, you
> still need to fall back to looking up by name for older device trees
> that don't have the compatible field.

Yup.

Okay.. I'm approaching lucky v7. ;-)

Much thanks for catching this,

-- 
Anton Vorontsov
email: cbou@mail.ru
backup email: ya-cbou@yandex.ru
irc://irc.freenode.net/bd2