LinuxPPC-Dev Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Roland McGrath <roland@redhat.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: linux-arch@vger.kernel.org, linuxppc-dev@ozlabs.org,
	Sam Ravnborg <sam@ravnborg.org>,
	linux-kernel@vger.kernel.org
Subject: [PATCH -mm] x86 compat_binfmt_elf
Subject: Re: [PATCH -mm] compat_binfmt_elf Kconfig
Date: Wed,  2 Jan 2008 13:12:43 -0800 (PST)	[thread overview]
Message-ID: <20080102211243.D7CFA26F9A0@magilla.localdomain> (raw)
In-Reply-To: Roland McGrath's message of  Wednesday, 2 January 2008 13:08:31 -0800 <20080102210831.9F80426F9A0@magilla.localdomain>

This patch replaces the earlier patch by the same title already in x86/mm:

	commit a9014d2dfcb253fb3ce5f4e3318849f743b85427
	Author: Roland McGrath <roland@redhat.com>

	    x86 compat_binfmt_elf

It requires the new patch I just posted, titled "compat_binfmt_elf Kconfig".


Thanks,
Roland
---
x86 compat_binfmt_elf

This switches x86-64's 32-bit ELF support to use the shared
fs/compat_binfmt_elf.c code instead of our own ia32_binfmt.c.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/Kconfig             |    1 +
 arch/x86/ia32/Makefile       |    3 +-
 arch/x86/vdso/vdso32-setup.c |   33 ++++++++++++++++
 include/asm-x86/elf.h        |   88 ++++++++++++++++++++++++++++++-----------
 4 files changed, 99 insertions(+), 26 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 66d38bf..0000000 100644  
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1546,6 +1546,7 @@ source "fs/Kconfig.binfmt"
 config IA32_EMULATION
 	bool "IA32 Emulation"
 	depends on X86_64
+	select COMPAT_BINFMT_ELF
 	help
 	  Include code to run 32-bit programs under a 64-bit kernel. You should
 	  likely turn this on, unless you're 100% sure that you don't have any
diff --git a/arch/x86/ia32/Makefile b/arch/x86/ia32/Makefile
index 93a6fda..0000000 100644  
--- a/arch/x86/ia32/Makefile
+++ b/arch/x86/ia32/Makefile
@@ -2,8 +2,7 @@
 # Makefile for the ia32 kernel emulation subsystem.
 #
 
-obj-$(CONFIG_IA32_EMULATION) := ia32entry.o sys_ia32.o ia32_signal.o \
-	ia32_binfmt.o
+obj-$(CONFIG_IA32_EMULATION) := ia32entry.o sys_ia32.o ia32_signal.o
 
 sysv-$(CONFIG_SYSVIPC) := ipc32.o
 obj-$(CONFIG_IA32_EMULATION) += $(sysv-y)
diff --git a/arch/x86/vdso/vdso32-setup.c b/arch/x86/vdso/vdso32-setup.c
index e0feb66..0000000 100644  
--- a/arch/x86/vdso/vdso32-setup.c
+++ b/arch/x86/vdso/vdso32-setup.c
@@ -377,6 +377,39 @@ int arch_setup_additional_pages(struct l
 
 __initcall(sysenter_setup);
 
+#ifdef CONFIG_SYSCTL
+/* Register vsyscall32 into the ABI table */
+#include <linux/sysctl.h>
+
+static ctl_table abi_table2[] = {
+	{
+		.procname	= "vsyscall32",
+		.data		= &sysctl_vsyscall32,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec
+	},
+	{}
+};
+
+static ctl_table abi_root_table2[] = {
+	{
+		.ctl_name = CTL_ABI,
+		.procname = "abi",
+		.mode = 0555,
+		.child = abi_table2
+	},
+	{}
+};
+
+static __init int ia32_binfmt_init(void)
+{
+	register_sysctl_table(abi_root_table2);
+	return 0;
+}
+__initcall(ia32_binfmt_init);
+#endif
+
 #else  /* CONFIG_X86_32 */
 
 const char *arch_vma_name(struct vm_area_struct *vma)
diff --git a/include/asm-x86/elf.h b/include/asm-x86/elf.h
index d6bf742..0000000 100644  
--- a/include/asm-x86/elf.h
+++ b/include/asm-x86/elf.h
@@ -73,6 +73,9 @@ typedef struct user_fxsr_struct elf_fpxr
 #endif
 
 #ifdef __KERNEL__
+#include <asm/vdso.h>
+
+extern unsigned int vdso_enabled;
 
 /*
  * This is used to ensure we don't load something for the wrong architecture.
@@ -84,7 +87,6 @@ typedef struct user_fxsr_struct elf_fpxr
 #include <asm/processor.h>
 #include <asm/system.h>		/* for savesegment */
 #include <asm/desc.h>
-#include <asm/vdso.h>
 
 #define elf_check_arch(x)	elf_check_arch_ia32(x)
 
@@ -106,7 +108,6 @@ typedef struct user_fxsr_struct elf_fpxr
 
 #define ELF_PLATFORM	(utsname()->machine)
 #define set_personality_64bit()	do { } while (0)
-extern unsigned int vdso_enabled;
 
 #else /* CONFIG_X86_32 */
 
@@ -118,29 +119,57 @@ extern unsigned int vdso_enabled;
 #define elf_check_arch(x) \
 	((x)->e_machine == EM_X86_64)
 
+#define compat_elf_check_arch(x)	elf_check_arch_ia32(x)
+
+static inline void start_ia32_thread(struct pt_regs *regs, u32 ip, u32 sp)
+{
+	asm volatile("movl %0,%%fs" :: "r" (0));
+	asm volatile("movl %0,%%es; movl %0,%%ds" : : "r" (__USER32_DS));
+	load_gs_index(0);
+	regs->ip = ip;
+	regs->sp = sp;
+	regs->flags = X86_EFLAGS_IF;
+	regs->cs = __USER32_CS;
+	regs->ss = __USER32_DS;
+}
+
+static inline void elf_common_init(struct thread_struct *t,
+				   struct pt_regs *regs, const u16 ds)
+{
+	regs->ax = regs->bx = regs->cx = regs->dx = 0;
+	regs->si = regs->di = regs->bp = 0;
+	regs->r8 = regs->r9 = regs->r10 = regs->r11 = 0;
+	regs->r12 = regs->r13 = regs->r14 = regs->r15 = 0;
+	t->fs = t->gs = 0;
+	t->fsindex = t->gsindex = 0;
+	t->ds = t->es = ds;
+}
+
 #define ELF_PLAT_INIT(_r, load_addr)	do {		  \
-	struct task_struct *cur = current;		  \
-	(_r)->bx = 0; (_r)->cx = 0; (_r)->dx = 0;	  \
-	(_r)->si = 0; (_r)->di = 0; (_r)->bp = 0;	  \
-	(_r)->ax = 0;					  \
-	(_r)->r8 = 0;					  \
-	(_r)->r9 = 0;					  \
-	(_r)->r10 = 0;					  \
-	(_r)->r11 = 0;					  \
-	(_r)->r12 = 0;					  \
-	(_r)->r13 = 0;					  \
-	(_r)->r14 = 0;					  \
-	(_r)->r15 = 0;					  \
-	cur->thread.fs = 0; cur->thread.gs = 0;		  \
-	cur->thread.fsindex = 0; cur->thread.gsindex = 0; \
-	cur->thread.ds = 0; cur->thread.es = 0;		  \
+	elf_common_init(&current->thread, _r, 0);	  \
 	clear_thread_flag(TIF_IA32);			  \
 } while (0)
 
+#define	COMPAT_ELF_PLAT_INIT(regs, load_addr)	\
+	elf_common_init(&current->thread, regs, __USER_DS)
+#define	compat_start_thread(regs, ip, sp)	do {		\
+		start_ia32_thread(regs, ip, sp);		\
+		set_fs(USER_DS);				\
+	} while (0)
+#define COMPAT_SET_PERSONALITY(ex, ibcs2)	do {		\
+		if (test_thread_flag(TIF_IA32))			\
+			clear_thread_flag(TIF_ABI_PENDING);	\
+		else						\
+			set_thread_flag(TIF_ABI_PENDING);	\
+		current->personality |= force_personality32;	\
+	} while (0)
+#define COMPAT_ELF_PLATFORM			("i686")
+
 /* I'm not sure if we can use '-' here */
 #define ELF_PLATFORM       ("x86_64")
 extern void set_personality_64bit(void);
-extern int vdso_enabled;
+extern unsigned int sysctl_vsyscall32;
+extern int force_personality32;
 
 #endif /* !CONFIG_X86_32 */
 
@@ -179,17 +208,19 @@ extern int vdso_enabled;
 
 struct task_struct;
 
+#define	ARCH_DLINFO_IA32(vdso_enabled) \
+do if (vdso_enabled) {							\
+		NEW_AUX_ENT(AT_SYSINFO,	VDSO_ENTRY);			\
+		NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_CURRENT_BASE);	\
+} while (0)
+
 #ifdef CONFIG_X86_32
 
 #define VDSO_HIGH_BASE		(__fix_to_virt(FIX_VDSO))
 
-/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
+#define ARCH_DLINFO		ARCH_DLINFO_IA32(vdso_enabled)
 
-#define ARCH_DLINFO \
-do if (vdso_enabled) {							\
-		NEW_AUX_ENT(AT_SYSINFO,	VDSO_ENTRY);			\
-		NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_CURRENT_BASE);	\
-} while (0)
+/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
 
 #else /* CONFIG_X86_32 */
 
@@ -203,6 +234,12 @@ do if (vdso_enabled) {						\
 	NEW_AUX_ENT(AT_SYSINFO_EHDR,(unsigned long)current->mm->context.vdso);\
 } while (0)
 
+#define AT_SYSINFO		32
+
+#define COMPAT_ARCH_DLINFO	ARCH_DLINFO_IA32(sysctl_vsyscall32)
+
+#define COMPAT_ELF_ET_DYN_BASE	(TASK_UNMAPPED_BASE + 0x1000000)
+
 #endif /* !CONFIG_X86_32 */
 
 #define VDSO_CURRENT_BASE	((unsigned long)current->mm->context.vdso)
@@ -216,6 +253,9 @@ struct linux_binprm;
 extern int arch_setup_additional_pages(struct linux_binprm *bprm,
 				       int executable_stack);
 
+extern int syscall32_setup_pages(struct linux_binprm *, int exstack);
+#define compat_arch_setup_additional_pages	syscall32_setup_pages
+
 extern unsigned long arch_randomize_brk(struct mm_struct *mm);
 #define arch_randomize_brk arch_randomize_brk
 

  reply	other threads:[~2008-01-02 21:12 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20071223183920.GA13976@elte.hu>
     [not found] ` <20071223211603.3FFB126F8E7@magilla.localdomain>
     [not found]   ` <20071230163614.GB1384@elte.hu>
     [not found]     ` <20080102044157.A5CC526F99F@magilla.localdomain>
     [not found]       ` <20080102111431.GD14731@elte.hu>
     [not found]         ` <20080102191030.GA11217@uranus.ravnborg.org>
2008-01-02 21:08           ` [PATCH -mm] compat_binfmt_elf Kconfig Roland McGrath
2008-01-02 21:12             ` Roland McGrath [this message]
2008-01-02 21:58               ` [PATCH -mm] x86 compat_binfmt_elf Ingo Molnar
2008-01-02 21:17             ` [PATCH -mm] powerpc compat_binfmt_elf Roland McGrath
2008-01-02 21:53             ` [PATCH -mm] compat_binfmt_elf Kconfig Sam Ravnborg
2008-01-02 21:59               ` Sam Ravnborg
2008-01-02 22:12               ` Roland McGrath
2008-01-03  7:23                 ` Sam Ravnborg
2008-01-02 21:57             ` Ingo Molnar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080102211243.D7CFA26F9A0@magilla.localdomain \
    --to=roland@redhat.com \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=mingo@elte.hu \
    --cc=sam@ravnborg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox