From: Stephen Rothwell <sfr@canb.auug.org.au>
To: paulus@samba.org
Cc: ppc-dev <linuxppc-dev@ozlabs.org>
Subject: [PATCH] [POWERPC] therm_adt746x: eliminate some build warnings
Date: Thu, 3 Jan 2008 15:17:12 +1100 [thread overview]
Message-ID: <20080103151712.71b7fbba.sfr@canb.auug.org.au> (raw)
We don't care if the device_create_file calls fail, the driver will work
just as well without them, so just issue a runtime warning.
drivers/macintosh/therm_adt746x.c: In function 'thermostat_init':
drivers/macintosh/therm_adt746x.c:615: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:616: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:617: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:618: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:619: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:620: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:621: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:622: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:623: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:625: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
drivers/macintosh/therm_adt746x.c | 24 ++++++++++++++----------
1 files changed, 14 insertions(+), 10 deletions(-)
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index 276945d..54f4942 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -553,6 +553,7 @@ thermostat_init(void)
struct device_node* np;
const u32 *prop;
int i = 0, offset = 0;
+ int err;
np = of_find_node_by_name(NULL, "fan");
if (!np)
@@ -612,17 +613,20 @@ thermostat_init(void)
return -ENODEV;
}
- device_create_file(&of_dev->dev, &dev_attr_sensor1_temperature);
- device_create_file(&of_dev->dev, &dev_attr_sensor2_temperature);
- device_create_file(&of_dev->dev, &dev_attr_sensor1_limit);
- device_create_file(&of_dev->dev, &dev_attr_sensor2_limit);
- device_create_file(&of_dev->dev, &dev_attr_sensor1_location);
- device_create_file(&of_dev->dev, &dev_attr_sensor2_location);
- device_create_file(&of_dev->dev, &dev_attr_limit_adjust);
- device_create_file(&of_dev->dev, &dev_attr_specified_fan_speed);
- device_create_file(&of_dev->dev, &dev_attr_sensor1_fan_speed);
+ err = device_create_file(&of_dev->dev, &dev_attr_sensor1_temperature);
+ err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_temperature);
+ err |= device_create_file(&of_dev->dev, &dev_attr_sensor1_limit);
+ err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_limit);
+ err |= device_create_file(&of_dev->dev, &dev_attr_sensor1_location);
+ err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_location);
+ err |= device_create_file(&of_dev->dev, &dev_attr_limit_adjust);
+ err |= device_create_file(&of_dev->dev, &dev_attr_specified_fan_speed);
+ err |= device_create_file(&of_dev->dev, &dev_attr_sensor1_fan_speed);
if(therm_type == ADT7460)
- device_create_file(&of_dev->dev, &dev_attr_sensor2_fan_speed);
+ err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_fan_speed);
+ if (err)
+ printk(KERN_WARNING
+ "Failed to create tempertaure attribute file(s).\n");
#ifndef CONFIG_I2C_POWERMAC
request_module("i2c-powermac");
--
1.5.3.7
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
reply other threads:[~2008-01-03 4:17 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080103151712.71b7fbba.sfr@canb.auug.org.au \
--to=sfr@canb.auug.org.au \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox