[PATCH 1/3 v2] Add StorCenter DTS first draft.

[PATCH 1/3 v2] Add StorCenter DTS first draft.

[Jon Loeliger]

Based on the Kurobox DTS files.

Signed-off-by: Andy Wilcox <andy@protium.com>
Signed-off-by: Jon Loeliger <jdl@jdl.com>
---

Pulled PCI node out.
Fixed flash node.

 arch/powerpc/boot/dts/storcenter.dts |  155 ++++++++++++++++++++++++++++++++++
 1 files changed, 155 insertions(+), 0 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/storcenter.dts

diff --git a/arch/powerpc/boot/dts/storcenter.dts b/arch/powerpc/boot/dts/storcenter.dts
new file mode 100644
index 0000000..93aa5a1
--- /dev/null
+++ b/arch/powerpc/boot/dts/storcenter.dts
@@ -0,0 +1,155 @@
+/*
+ * Device Tree Source for IOMEGA StorCenter
+ *
+ * Copyright 2007 Oyvind Repvik
+ * Copyright 2007 Jon Loeliger
+ *
+ * Based on the Kurobox DTS by G. Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+	model = "StorCenter";
+	compatible = "storcenter";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+        aliases {
+                serial0 = &serial0;
+                serial1 = &serial1;
+                pci0 = &pci0;
+        };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8241@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clock-frequency = <d# 200000000>;	/* Hz */
+			timebase-frequency = <d# 25000000>;	/* Hz */
+			bus-frequency = <0>;	/* from bootwrapper */
+			i-cache-line-size = <d# 32>;	/* bytes */
+			d-cache-line-size = <d# 32>;	/* bytes */
+			i-cache-size = <4000>;
+			d-cache-size = <4000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 04000000>;	/* 64MB @ 0x0 */
+	};
+
+	flash@ff800000 {
+		compatible = "cfi-flash";
+		reg = <ff800000 800000>;
+		bank-width = <4>;
+                #address-cells = <1>;
+                #size-cells = <1>;
+		partion@0 {
+			label = "kernel";
+			reg = <0 170000>;
+		};
+		partion@1 {
+			label = "rootfs";
+			reg = <170000 590000>;
+		};
+		partion@2 {
+			label = "uboot";
+			reg = <700000 40000>;
+		};
+		partion@3 {
+			label = "config";
+			reg = <740000 c0000>;
+		};
+	};
+
+	soc@80000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8241", "mpc10x";
+		store-gathering = <0>; /* 0 == off, !0 == on */
+		ranges = <0 fdf00000 00100000>;
+		reg = <fdf00000 10000>;		/* EUMB */
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-i2c";
+			reg = <3000 1000>;
+			interrupts = <5 2>;
+			interrupt-parent = <&mpic>;
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <68>;
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 8>;
+			clock-frequency = <d# 97553800>; /* Hz */
+			current-speed = <d# 115200>;
+			interrupts = <9 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 8>;
+			clock-frequency = <d# 97553800>; /* Hz */
+			current-speed = <d# 9600>;
+			interrupts = <a 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		mpic: interrupt-controller@fdf40000 {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			device_type = "open-pic";
+			compatible = "chrp,open-pic";
+			interrupt-controller;
+			reg = <fdf40000 40000>;
+		};
+
+	};
+
+	pci0: pci@fe800000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "mpc10x-pci";
+		reg = <fe800000 1000>;
+		ranges = <01000000 0        0 fe000000 0 00c00000
+			  02000000 0 80000000 80000000 0 70000000>;
+		bus-range = <0 ff>;
+		clock-frequency = <d# 97553800>; /* Hz */
+		interrupt-parent = <&mpic>;
+		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 15 - ETH */
+			7800 0 0 1 &mpic 0 1
+			7800 0 0 2 &mpic 0 1
+			7800 0 0 3 &mpic 0 1
+			7800 0 0 4 &mpic 0 1
+		>;
+	};
+
+        chosen {
+                linux,stdout-path = "/soc@80000000/serial@4500";
+                bootargs = "console=ttyS0,115200";
+        };
+
+};
-- 
1.5.4.rc0

Re: [PATCH 1/3 v2] Add StorCenter DTS first draft.

[Scott Wood]

On Tue, Jan 08, 2008 at 04:06:56PM -0600, Jon Loeliger wrote:
> +/ {
> +	model = "StorCenter";
> +	compatible = "storcenter";
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +
> +        aliases {
> +                serial0 = &serial0;
> +                serial1 = &serial1;
> +                pci0 = &pci0;
> +        };

These should be tabs, not spaces.  Likewise in some other parts of the file.

-Scott

Re: [PATCH 1/3 v2] Add StorCenter DTS first draft.

[Jon Loeliger]

So, like, the other day Scott Wood mumbled:
> On Tue, Jan 08, 2008 at 04:06:56PM -0600, Jon Loeliger wrote:
> > +/ {
> > +	model = "StorCenter";
> > +	compatible = "storcenter";
> > +	#address-cells = <1>;
> > +	#size-cells = <1>;
> > +
> > +        aliases {
> > +                serial0 = &serial0;
> > +                serial1 = &serial1;
> > +                pci0 = &pci0;
> > +        };
> 
> These should be tabs, not spaces.  Likewise in some other parts of the file.
> 
> -Scott

Shoot me now.

jdl

Re: [PATCH 1/3 v2] Add StorCenter DTS first draft.

[Scott Wood]

Jon Loeliger wrote:
> So, like, the other day Scott Wood mumbled:
>> On Tue, Jan 08, 2008 at 04:06:56PM -0600, Jon Loeliger wrote:
>>> +/ {
>>> +	model = "StorCenter";
>>> +	compatible = "storcenter";
>>> +	#address-cells = <1>;
>>> +	#size-cells = <1>;
>>> +
>>> +        aliases {
>>> +                serial0 = &serial0;
>>> +                serial1 = &serial1;
>>> +                pci0 = &pci0;
>>> +        };
>> These should be tabs, not spaces.  Likewise in some other parts of the file.
>>
>> -Scott
> 
> Shoot me now.

Bullet, camera, or heroin?

-Scott