From: David Gibson <dwg@au1.ibm.com>
To: Josh Boyer <jwboyer@linux.vnet.ibm.com>,
Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@ozlabs.org
Subject: Enable RTC for Ebony and Walnut (v2)
Date: Fri, 11 Jan 2008 14:25:34 +1100 [thread overview]
Message-ID: <20080111032534.GA25055@localhost.localdomain> (raw)
In-Reply-To: <20071221022130.GI2665@localhost.localdomain>
This patch extends the Ebony and Walnut platform code to instantiate
the existing ds1742 RTC class driver for the DS1743 RTC/NVRAM chip
found on both those boards. The patch uses a helper function to scan
the device tree and instantiate the appropriate platform_device based
on it, so it should be easy to extend for other boards which have mmio
mapped RTC chips.
Along with this, the device tree binding for the ds1743 chips is
tweaked, based on the existing DS1385 OF binding found at:
http://playground.sun.com/1275/proposals/Closed/Remanded/Accepted/346-it.txt
Although that document covers the NVRAM portion of the chip, whereas
here we're interested in the RTC portion, so it's not entirely clear
if that's a good model.
This implements only RTC class driver support - that is /dev/rtc0, not
/dev/rtc, and the low-level get/set time callbacks remain
unimplemented. That means in order to get at the clock you will
either need a modified version of hwclock which will look at
/dev/rtc0, or you'll need to configure udev to symlink rtc0 to rtc.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
---
Updated for kernel changes and feedback.
Index: working-2.6/arch/powerpc/boot/dts/ebony.dts
===================================================================
--- working-2.6.orig/arch/powerpc/boot/dts/ebony.dts 2008-01-11 11:45:27.000000000 +1100
+++ working-2.6/arch/powerpc/boot/dts/ebony.dts 2008-01-11 14:17:03.000000000 +1100
@@ -158,9 +158,10 @@
};
};
- ds1743@1,0 {
+ nvram@1,0 {
/* NVRAM & RTC */
- compatible = "ds1743";
+ compatible = "ds1743-nvram";
+ #bytes = <2000>;
reg = <1 0 2000>;
};
Index: working-2.6/arch/powerpc/platforms/44x/ebony.c
===================================================================
--- working-2.6.orig/arch/powerpc/platforms/44x/ebony.c 2008-01-11 11:45:27.000000000 +1100
+++ working-2.6/arch/powerpc/platforms/44x/ebony.c 2008-01-11 14:17:03.000000000 +1100
@@ -18,6 +18,7 @@
#include <linux/init.h>
#include <linux/of_platform.h>
+#include <linux/rtc.h>
#include <asm/machdep.h>
#include <asm/prom.h>
@@ -38,6 +39,7 @@ static __initdata struct of_device_id eb
static int __init ebony_device_probe(void)
{
of_platform_bus_probe(NULL, ebony_of_bus, NULL);
+ of_instantiate_rtc();
return 0;
}
Index: working-2.6/arch/powerpc/platforms/Kconfig
===================================================================
--- working-2.6.orig/arch/powerpc/platforms/Kconfig 2007-12-10 10:52:44.000000000 +1100
+++ working-2.6/arch/powerpc/platforms/Kconfig 2008-01-11 14:17:03.000000000 +1100
@@ -315,6 +315,12 @@ config FSL_ULI1575
config CPM
bool
+config OF_RTC
+ bool
+ help
+ Uses information from the OF or flattened device tree to instatiate
+ platform devices for direct mapped RTC chips like the DS1742 or DS1743.
+
source "arch/powerpc/sysdev/bestcomm/Kconfig"
endmenu
Index: working-2.6/arch/powerpc/sysdev/Makefile
===================================================================
--- working-2.6.orig/arch/powerpc/sysdev/Makefile 2008-01-11 11:45:27.000000000 +1100
+++ working-2.6/arch/powerpc/sysdev/Makefile 2008-01-11 14:17:03.000000000 +1100
@@ -27,6 +27,7 @@ obj-$(CONFIG_PPC_I8259) += i8259.o
obj-$(CONFIG_PPC_83xx) += ipic.o
obj-$(CONFIG_4xx) += uic.o
obj-$(CONFIG_XILINX_VIRTEX) += xilinx_intc.o
+obj-$(CONFIG_OF_RTC) += of_rtc.o
ifeq ($(CONFIG_PCI),y)
obj-$(CONFIG_4xx) += ppc4xx_pci.o
endif
Index: working-2.6/arch/powerpc/sysdev/of_rtc.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ working-2.6/arch/powerpc/sysdev/of_rtc.c 2008-01-11 14:17:03.000000000 +1100
@@ -0,0 +1,59 @@
+/*
+ * Instantiate mmio-mapped RTC chips based on device tree information
+ *
+ * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+static __initdata struct {
+ const char *compatible;
+ char *plat_name;
+} of_rtc_table[] = {
+ { "ds1743-nvram", "rtc-ds1742" },
+};
+
+void __init of_instantiate_rtc(void)
+{
+ struct device_node *node;
+ int err;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(of_rtc_table); i++) {
+ char *plat_name = of_rtc_table[i].plat_name;
+
+ for_each_compatible_node(node, NULL,
+ of_rtc_table[i].compatible) {
+ struct resource *res;
+
+ res = kmalloc(sizeof(*res), GFP_KERNEL);
+ if (!res) {
+ printk(KERN_ERR "OF RTC: Out of memory "
+ "allocating resource structure for %s\n",
+ node->full_name);
+ continue;
+ }
+
+ err = of_address_to_resource(node, 0, res);
+ if (err) {
+ printk(KERN_ERR "OF RTC: Error "
+ "translating resources for %s\n",
+ node->full_name);
+ continue;
+ }
+
+ printk(KERN_INFO "OF_RTC: %s is a %s @ 0x%llx-0x%llx\n",
+ node->full_name, plat_name,
+ (unsigned long long)res->start,
+ (unsigned long long)res->end);
+ platform_device_register_simple(plat_name, -1, res, 1);
+ }
+ }
+}
Index: working-2.6/arch/powerpc/platforms/44x/Kconfig
===================================================================
--- working-2.6.orig/arch/powerpc/platforms/44x/Kconfig 2008-01-11 11:45:27.000000000 +1100
+++ working-2.6/arch/powerpc/platforms/44x/Kconfig 2008-01-11 14:17:03.000000000 +1100
@@ -13,6 +13,7 @@ config EBONY
default y
select 440GP
select PCI
+ select OF_RTC
help
This option enables support for the IBM PPC440GP evaluation board.
Index: working-2.6/include/asm-powerpc/of_platform.h
===================================================================
--- working-2.6.orig/include/asm-powerpc/of_platform.h 2008-01-11 11:45:29.000000000 +1100
+++ working-2.6/include/asm-powerpc/of_platform.h 2008-01-11 14:17:03.000000000 +1100
@@ -37,4 +37,6 @@ extern int of_platform_bus_probe(struct
extern struct of_device *of_find_device_by_phandle(phandle ph);
+extern void of_instantiate_rtc(void);
+
#endif /* _ASM_POWERPC_OF_PLATFORM_H */
Index: working-2.6/arch/powerpc/boot/dts/walnut.dts
===================================================================
--- working-2.6.orig/arch/powerpc/boot/dts/walnut.dts 2008-01-11 11:45:27.000000000 +1100
+++ working-2.6/arch/powerpc/boot/dts/walnut.dts 2008-01-11 14:17:03.000000000 +1100
@@ -175,9 +175,10 @@
};
};
- ds1743@1,0 {
+ nvram@1,0 {
/* NVRAM and RTC */
- compatible = "ds1743";
+ compatible = "ds1743-nvram";
+ #bytes = <2000>;
reg = <1 0 2000>;
};
Index: working-2.6/arch/powerpc/platforms/40x/walnut.c
===================================================================
--- working-2.6.orig/arch/powerpc/platforms/40x/walnut.c 2008-01-11 11:45:27.000000000 +1100
+++ working-2.6/arch/powerpc/platforms/40x/walnut.c 2008-01-11 14:17:03.000000000 +1100
@@ -36,6 +36,7 @@ static __initdata struct of_device_id wa
static int __init walnut_device_probe(void)
{
of_platform_bus_probe(NULL, walnut_of_bus, NULL);
+ of_instantiate_rtc();
return 0;
}
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
next prev parent reply other threads:[~2008-01-11 3:25 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-21 2:21 Enable RTC for Ebony and Walnut David Gibson
2007-12-21 5:16 ` Stephen Rothwell
2007-12-21 21:29 ` Olof Johansson
2008-01-02 11:42 ` David Gibson
2008-01-06 20:48 ` Olof Johansson
2008-01-11 3:25 ` David Gibson [this message]
2008-01-11 6:29 ` Enable RTC for Ebony and Walnut (v2) Stephen Rothwell
2008-01-14 4:02 ` David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080111032534.GA25055@localhost.localdomain \
--to=dwg@au1.ibm.com \
--cc=jwboyer@linux.vnet.ibm.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).