From: Jon Smirl <jonsmirl@gmail.com>
To: i2c@lm-sensors.org, linuxppc-dev@ozlabs.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 19 5/5] Convert pfc8563 i2c driver from old style to new style
Date: Fri, 11 Jan 2008 21:47:48 -0500 [thread overview]
Message-ID: <20080112024748.7023.90680.stgit@terra.home> (raw)
In-Reply-To: <20080112024737.7023.61680.stgit@terra.home>
Convert pfc8563 i2c driver from old style to new style. The
driver is also modified to support device tree names via the
i2c mod alias mechanism.
Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
---
drivers/rtc/rtc-pcf8563.c | 107 +++++++++++----------------------------------
1 files changed, 27 insertions(+), 80 deletions(-)
diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c
index 0242d80..e1ea2a0 100644
--- a/drivers/rtc/rtc-pcf8563.c
+++ b/drivers/rtc/rtc-pcf8563.c
@@ -25,10 +25,6 @@
* located at 0x51 will pass the validation routine due to
* the way the registers are implemented.
*/
-static unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Module parameters */
-I2C_CLIENT_INSMOD;
#define PCF8563_REG_ST1 0x00 /* status */
#define PCF8563_REG_ST2 0x01
@@ -72,9 +68,6 @@ struct pcf8563 {
int c_polarity; /* 0: MO_C=1 means 19xx, otherwise MO_C=1 means 20xx */
};
-static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind);
-static int pcf8563_detach(struct i2c_client *client);
-
/*
* In the routines that deal directly with the pcf8563 hardware, we use
* rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
@@ -257,98 +250,52 @@ static const struct rtc_class_ops pcf8563_rtc_ops = {
.set_time = pcf8563_rtc_set_time,
};
-static int pcf8563_attach(struct i2c_adapter *adapter)
+static int pcf8563_remove(struct i2c_client *client)
{
- return i2c_probe(adapter, &addr_data, pcf8563_probe);
+ struct rtc_device *rtc = i2c_get_clientdata(client);
+
+ if (rtc)
+ rtc_device_unregister(rtc);
+
+ return 0;
}
+static struct i2c_device_id pcf8563_id[] = {
+ OF_I2C_ID("philips,pcf8563", 0)
+ OF_I2C_ID("epson,rtc8564", 0)
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, pcf8563_id);
+
+static int pcf8563_probe(struct i2c_client *client, const struct i2c_device_id *id);
+
static struct i2c_driver pcf8563_driver = {
.driver = {
- .name = "pcf8563",
+ .name = "rtc-pcf8563",
},
.id = I2C_DRIVERID_PCF8563,
- .attach_adapter = &pcf8563_attach,
- .detach_client = &pcf8563_detach,
+ .probe = &pcf8563_probe,
+ .remove = &pcf8563_remove,
+ .id_table = pcf8563_id,
};
-static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind)
+static int pcf8563_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
- struct pcf8563 *pcf8563;
- struct i2c_client *client;
+ int result;
struct rtc_device *rtc;
- int err = 0;
-
- dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-
- if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
- err = -ENODEV;
- goto exit;
- }
-
- if (!(pcf8563 = kzalloc(sizeof(struct pcf8563), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- client = &pcf8563->client;
- client->addr = address;
- client->driver = &pcf8563_driver;
- client->adapter = adapter;
-
- strlcpy(client->name, pcf8563_driver.driver.name, I2C_NAME_SIZE);
-
- /* Verify the chip is really an PCF8563 */
- if (kind < 0) {
- if (pcf8563_validate_client(client) < 0) {
- err = -ENODEV;
- goto exit_kfree;
- }
- }
-
- /* Inform the i2c layer */
- if ((err = i2c_attach_client(client)))
- goto exit_kfree;
-
- dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
+ result = pcf8563_validate_client(client);
+ if (result)
+ return result;
rtc = rtc_device_register(pcf8563_driver.driver.name, &client->dev,
&pcf8563_rtc_ops, THIS_MODULE);
-
- if (IS_ERR(rtc)) {
- err = PTR_ERR(rtc);
- goto exit_detach;
- }
+ if (IS_ERR(rtc))
+ return PTR_ERR(rtc);
i2c_set_clientdata(client, rtc);
return 0;
-
-exit_detach:
- i2c_detach_client(client);
-
-exit_kfree:
- kfree(pcf8563);
-
-exit:
- return err;
-}
-
-static int pcf8563_detach(struct i2c_client *client)
-{
- struct pcf8563 *pcf8563 = container_of(client, struct pcf8563, client);
- int err;
- struct rtc_device *rtc = i2c_get_clientdata(client);
-
- if (rtc)
- rtc_device_unregister(rtc);
-
- if ((err = i2c_detach_client(client)))
- return err;
-
- kfree(pcf8563);
-
- return 0;
}
static int __init pcf8563_init(void)
next prev parent reply other threads:[~2008-01-12 2:48 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-12 2:47 [PATCH 19 0/5] Version 18, series to add device tree naming to i2c Jon Smirl
2008-01-12 2:47 ` [PATCH 19 1/5] Implement module aliasing for i2c to translate from device tree names Jon Smirl
2008-01-12 3:00 ` [i2c] " Jon Smirl
2008-01-12 3:47 ` Stephen Rothwell
2008-01-12 2:47 ` [PATCH 19 2/5] Modify several rtc drivers to use the alias names list property of i2c Jon Smirl
2008-01-12 2:47 ` [PATCH 19 3/5] Clean up error returns Jon Smirl
2008-01-20 11:07 ` [i2c] " Jean Delvare
2008-01-20 15:18 ` Jon Smirl
2008-01-20 15:39 ` Jon Smirl
2008-01-21 16:10 ` Jean Delvare
2008-01-21 23:04 ` Benjamin Herrenschmidt
2008-01-21 23:06 ` Benjamin Herrenschmidt
2008-01-12 2:47 ` [PATCH 19 4/5] Convert PowerPC MPC i2c to of_platform_driver from platform_driver Jon Smirl
2008-01-12 4:07 ` Stephen Rothwell
2008-01-12 2:47 ` Jon Smirl [this message]
2008-04-10 9:14 ` [PATCH 19 5/5] Convert pfc8563 i2c driver from old style to new style Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080112024748.7023.90680.stgit@terra.home \
--to=jonsmirl@gmail.com \
--cc=i2c@lm-sensors.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).