From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from outbound5-sin-R.bigfish.com (outbound-sin.frontbridge.com [207.46.51.80]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client CN "*.bigfish.com", Issuer "*.bigfish.com" (not verified)) by ozlabs.org (Postfix) with ESMTP id 67BC6DDEDF for ; Tue, 15 Jan 2008 05:47:41 +1100 (EST) MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Subject: RE: Linux for ml310 Date: Mon, 14 Jan 2008 10:47:37 -0800 In-Reply-To: <14808605.post@talk.nabble.com> References: <520220685@web.de> <524587219@web.de> <14808605.post@talk.nabble.com> From: "Stephen Neuendorffer" To: "greenlean" , Message-Id: <20080114184738.5CA4555007D@mail104-sin.bigfish.com> List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , If you are using the secretlab.ca or git.xilinx.com trees, then you should *not* follow the normal BSP generation process. You need to generate the BSP in a dummy location and then copy only the xparameters_*.h file over the appropriate one in arch/ppc/platforms/4xx/xparameters and make menuconfig. Steve > -----Original Message----- > From: linuxppc-embedded-bounces+stephen=3Dneuendorffer.name@ozlabs.org [mailto:linuxppc-embedded- > bounces+stephen=3Dneuendorffer.name@ozlabs.org] On Behalf Of greenlean > Sent: Monday, January 14, 2008 10:42 AM > To: linuxppc-embedded@ozlabs.org > Subject: Re: Linux for ml310 >=20 >=20 > Hi, I was reading this post and a question came to my mind. >=20 > When I try to compile, did I have to copy the EDK driver folder to my Xilinx > 2.6 kernel tree and run the cow.tcl script generated by EDK?? Or this is > unnecesay?? >=20 >=20 >=20 >=20 > Grant Likely-2 wrote: > > > > On 1/9/08, Joachim Meyer wrote: > >> Hi > >> > >> I switched "Xilinx uartlite serieal port support" and "Support for > >> console on Xilinxuartlite serialport" on and "8250/16550 and compatible > >> serial support" off, in the kernel config. > >> Then I removed the things I added in the xparameters.h and compiled > >> successfully. > >> But I have yet a few Questions: > >> > >> - What would you recommend to use? UART-Lite or a 16550 serial port. Can > >> I get a console running on the RS232 Port of the Board with both > >> possibilities? > > > > if you don't need to change the baud rate at runtime then use the > > uartlite. > > > > Console works on both. > > > >> > >> - Can you recommend anything for my next steps to get an running linux > >> (rootfs usw.)? So far I oriented myself on the Klingauf page, but I think > >> it is perhaps not the best one because its too old and some things will > >> probably not work the way he did it anymore. > > > > Use either ELDK or buildroot. Personally, I'd like to be using > > OpenEmbedded, but I haven't been successful with that yet. > > > > Cheers, > > g. > > > > -- > > Grant Likely, B.Sc., P.Eng. > > Secret Lab Technologies Ltd. > > _______________________________________________ > > Linuxppc-embedded mailing list > > Linuxppc-embedded@ozlabs.org > > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > > > > >=20 > -- > View this message in context: http://www.nabble.com/Linux-for-ml310-tp14675554p14808605.html > Sent from the linuxppc-embedded mailing list archive at Nabble.com. >=20 > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded