From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from ug-out-1314.google.com (ug-out-1314.google.com [66.249.92.174]) by ozlabs.org (Postfix) with ESMTP id CA37BDDE1E for ; Thu, 17 Jan 2008 10:42:30 +1100 (EST) Received: by ug-out-1314.google.com with SMTP id q7so292168uge.0 for ; Wed, 16 Jan 2008 15:42:27 -0800 (PST) Date: Thu, 17 Jan 2008 02:26:18 +0300 From: Anton Vorontsov To: Rune Torgersen Subject: Re: Fixed phy Message-ID: <20080116232618.GA30809@zarina> References: MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 In-Reply-To: Cc: linuxppc-dev@ozlabs.org Reply-To: cbouatmailru@gmail.com List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hello Rune, On Wed, Jan 16, 2008 at 10:50:53AM -0600, Rune Torgersen wrote: > > Hi > We're doing a port to 2.6.24-rc7, and we need to set up two ethernets > with fixed phy's as they have phyless interfaces to a switch. > WE cannot find any good examples on how to do this. We've found the > fixed speed PHY emulation in the configuration, but are unsure on > how to set the PHY's up in the device tree. > > This is using a 8280 cpu and ethernet on the FCC's See these patches: Fixed phy subsystem rework: http://ozlabs.org/pipermail/linuxppc-dev/2007-December/047777.html Fixed phy generic dts parsing & gianfar support: http://ozlabs.org/pipermail/linuxppc-dev/2007-December/047778.html Fixed phy support for fs_enet driver (SCC/FCC/FEC): http://ozlabs.org/pipermail/linuxppc-dev/2007-December/048090.html Example of usage: http://ozlabs.org/pipermail/linuxppc-dev/2007-December/047779.html -- Anton Vorontsov email: cbou@mail.ru backup email: ya-cbou@yandex.ru irc://irc.freenode.net/bd2