linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: linuxppc-dev@ozlabs.org
Subject: [PATCH 2/5] [POWERPC][NET] ucc_geth_mii and users: get rid of device_type
Date: Thu, 24 Jan 2008 18:40:01 +0300	[thread overview]
Message-ID: <20080124154001.GB23246@localhost.localdomain> (raw)
In-Reply-To: <20080124151850.GA15190@localhost.localdomain>

device_type property is bogus, thus use proper compatible.

Also change compatible property to "fsl,ucc-mdio".

Per http://ozlabs.org/pipermail/linuxppc-dev/2007-December/048388.html

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 arch/powerpc/boot/dts/mpc832x_mds.dts |    3 +--
 arch/powerpc/boot/dts/mpc832x_rdb.dts |    3 +--
 arch/powerpc/boot/dts/mpc836x_mds.dts |    3 +--
 arch/powerpc/boot/dts/mpc836x_rdk.dts |    3 +--
 arch/powerpc/boot/dts/mpc8568mds.dts  |    2 +-
 drivers/net/ucc_geth_mii.c            |    3 +++
 6 files changed, 8 insertions(+), 9 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index e300df4..1bb75ef 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -304,8 +304,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2320 18>;
-			device_type = "mdio";
-			compatible = "ucc_geth_phy";
+			compatible = "fsl,ucc-mdio";
 
 			phy3: ethernet-phy@03 {
 				interrupt-parent = < &ipic >;
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 4d5cfd3..f6a8633 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -237,8 +237,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3120 18>;
-			device_type = "mdio";
-			compatible = "ucc_geth_phy";
+			compatible = "fsl,ucc-mdio";
 
 			phy00:ethernet-phy@00 {
 				interrupt-parent = <&pic>;
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 9a2581b..fa98bdf 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -288,8 +288,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2120 18>;
-			device_type = "mdio";
-			compatible = "ucc_geth_phy";
+			compatible = "fsl,ucc-mdio";
 
 			phy0: ethernet-phy@00 {
 				interrupt-parent = < &ipic >;
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index e244619..e299442 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -251,8 +251,7 @@
 		mdio@2120 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			device_type = "mdio";
-			compatible = "fsl,ucc-mdio", "ucc_geth_phy";
+			compatible = "fsl,ucc-mdio";
 			reg = <0x2120 0x18>;
 
 			phy1: ethernet-phy@1 {
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 04f5c6f..692d5bd 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -357,7 +357,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2120 18>;
-			compatible = "ucc_geth_phy";
+			compatible = "fsl,ucc-mdio";
 
 			/* These are the same PHYs as on
 			 * gianfar's MDIO bus */
diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c
index df884f0..e3ba14a 100644
--- a/drivers/net/ucc_geth_mii.c
+++ b/drivers/net/ucc_geth_mii.c
@@ -256,6 +256,9 @@ static struct of_device_id uec_mdio_match[] = {
 		.type = "mdio",
 		.compatible = "ucc_geth_phy",
 	},
+	{
+		.compatible = "fsl,ucc-mdio",
+	},
 	{},
 };
 
-- 
1.5.2.2

  parent reply	other threads:[~2008-01-24 15:40 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-01-24 15:18 [PATCH v5 0/5] device_type/compatible cleanups Anton Vorontsov
2008-01-24 15:39 ` [PATCH 1/5] [POWERPC] qe_lib and users: get rid of most device_types and model Anton Vorontsov
2008-01-25 21:19   ` Kumar Gala
2008-02-04 13:13   ` Stephen Rothwell
2008-02-04 13:46     ` [PATCH] [POWERPC] qe_lib: fix few fluffy negligences (was: Re: [PATCH 1/5] [POWERPC] qe_lib and users: get rid of most device_types and model) Anton Vorontsov
2008-02-04 14:48       ` Stephen Rothwell
2008-02-06  6:04       ` Kumar Gala
2008-01-24 15:40 ` Anton Vorontsov [this message]
2008-01-24 15:52   ` [PATCH 2/5] [POWERPC][NET] ucc_geth_mii and users: get rid of device_type Kumar Gala
2008-01-24 16:11     ` Anton Vorontsov
2008-01-25 21:20   ` Kumar Gala
2008-01-24 15:40 ` [PATCH 3/5] [POWERPC][SPI] use brg-frequency for SPI in QE Anton Vorontsov
2008-01-25 21:20   ` Kumar Gala
2008-01-24 15:40 ` [PATCH 4/5] [POWERPC] fsl_spi_init and users: stop using device_type = "spi" Anton Vorontsov
2008-01-25 21:20   ` Kumar Gala
2008-01-24 15:40 ` [PATCH 5/5] [POWERPC] fsl_soc, legacy_serial: add support for "soc" compatible matching Anton Vorontsov
2008-01-25 16:35   ` Kumar Gala
2008-01-25 17:13     ` Anton Vorontsov
2008-01-25 17:26       ` Anton Vorontsov
2008-01-25 18:17       ` Scott Wood
2008-01-25 18:53         ` Anton Vorontsov
2008-01-25 19:03           ` Scott Wood
2008-01-25 19:18             ` Anton Vorontsov
2008-01-24 17:35 ` [PATCH v5 0/5] device_type/compatible cleanups Anton Vorontsov
2008-01-24 18:26   ` Jon Loeliger
2008-01-25 14:37 ` [PATCH 6/5] [POWERPC] get rid of `model = "UCC"' in the ucc nodes Anton Vorontsov
2008-01-25 16:33   ` Kumar Gala

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080124154001.GB23246@localhost.localdomain \
    --to=avorontsov@ru.mvista.com \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).