Re: Reminder: removal of arch/ppc - (Sequoia)

Re: Reminder: removal of arch/ppc - (Sequoia)

[Steve Heflin]

The Sequoia board (AMCC-440EPx processor) is missing from the new 
arch/powerpc. The Sequoia board is also missing from arch/ppc , but 
there is support for integrated devices on the AMCC part inside 
arch/ppc that needs to be incorporated into arch/powerpc. In 
addition, there needs to be a "sequoia.c" file added to the 
arch/powerpc/44x directory.  I have a good start on the missing 
pieces and a test platform, is this contribution desired?

- Steve Heflin
   New Age Micro
   CEO & Software Engineer

At 11:55 AM 1/25/2008, you wrote:
>Just a reminder that the plan is to remove arch/ppc this summer (June
>2008).  The following boards still existing over in arch/ppc.  Some of
>them have been ported over to arch/powerpc.  If you care about one of
>these boards and its not ported speak up (it helps if you have access
>to the board).  Also, if you know a given board is free to die of
>bitrot let us know so we know not to worry about it:
>
>         PREP
>         PQ2ADS
>         TQM8260
>         CPCI690
>         EV64260
>         CHESTNUT
>         LOPEC
>         KATANA
>         HDPU
>         MVME5100
>         PAL4
>         POWERPMC250
>         PPLUS
>         PRPMC750
>         PRPMC800
>         RADSTONE_PPC7D
>         SANDPOINT
>         SBC82xx
>         SPRUCE
>         LITE5200
>         EV64360
>         MPC86XADS
>         MPC885ADS
>         ADS8272
>
>4xx:
>         BAMBOO
>         CPCI405
>         EBONY
>         EP405
>         BUBINGA
>         LUAN
>         YUCCA
>         OCOTEA
>         REDWOOD_5
>         REDWOOD_6
>         SYCAMORE
>         TAISHAN
>         WALNUT
>         XILINX_ML300
>         XILINX_ML403
>
>- k
>
>_______________________________________________
>Linuxppc-embedded mailing list
>Linuxppc-embedded@ozlabs.org
>https://ozlabs.org/mailman/listinfo/linuxppc-embedded

Re: Reminder: removal of arch/ppc - (Sequoia)

[Steve Heflin]

Hello!

Yes! I'm looking at 2.6.23.14 as I thought that was the newest 
version. I completely missed seeing the 2.6.24 kit, thank you so much!!

- Steve

At 06:39 PM 1/27/2008, you wrote:
>Hi,
>
>On Sun, Jan 27, 2008 at 06:05:06PM -0500, Steve Heflin wrote:
> > The Sequoia board (AMCC-440EPx processor) is missing from the new
> > arch/powerpc. The Sequoia board is also missing from arch/ppc , but
> > there is support for integrated devices on the AMCC part inside
> > arch/ppc that needs to be incorporated into arch/powerpc. In
> > addition, there needs to be a "sequoia.c" file added to the
> > arch/powerpc/44x directory.  I have a good start on the missing
> > pieces and a test platform, is this contribution desired?
>
>2.6.24 already has sequoia support in arch/powerpc. Are you looking at
>an older tree?
>
>olof@quad:~/work/linux/k.org $ head arch/powerpc/platforms/44x/sequoia.c
>/*
>  * Sequoia board specific routines
>  *
>  * Valentine Barshak <vbarshak@ru.mvista.com>
>  * Copyright 2007 MontaVista Software Inc.
>  *
>  * Based on the Bamboo code by
>  * Josh Boyer <jwboyer@linux.vnet.ibm.com>
>  * Copyright 2007 IBM Corporation
>  *
>...
>
>_______________________________________________
>Linuxppc-embedded mailing list
>Linuxppc-embedded@ozlabs.org
>https://ozlabs.org/mailman/listinfo/linuxppc-embedded

Re: Reminder: removal of arch/ppc - (Sequoia)

[Olof Johansson]

Hi,

On Sun, Jan 27, 2008 at 06:05:06PM -0500, Steve Heflin wrote:
> The Sequoia board (AMCC-440EPx processor) is missing from the new 
> arch/powerpc. The Sequoia board is also missing from arch/ppc , but 
> there is support for integrated devices on the AMCC part inside 
> arch/ppc that needs to be incorporated into arch/powerpc. In 
> addition, there needs to be a "sequoia.c" file added to the 
> arch/powerpc/44x directory.  I have a good start on the missing 
> pieces and a test platform, is this contribution desired?

2.6.24 already has sequoia support in arch/powerpc. Are you looking at
an older tree?

olof@quad:~/work/linux/k.org $ head arch/powerpc/platforms/44x/sequoia.c
/*
 * Sequoia board specific routines
 *
 * Valentine Barshak <vbarshak@ru.mvista.com>
 * Copyright 2007 MontaVista Software Inc.
 *
 * Based on the Bamboo code by
 * Josh Boyer <jwboyer@linux.vnet.ibm.com>
 * Copyright 2007 IBM Corporation
 *
...

Re: Reminder: removal of arch/ppc - (Sequoia)

[Josh Boyer]

On Sun, 27 Jan 2008 18:37:22 -0500
Steve Heflin <sheflin@newagemicro.com> wrote:

> Hello!
> 
> Yes! I'm looking at 2.6.23.14 as I thought that was the newest 
> version. I completely missed seeing the 2.6.24 kit, thank you so much!!

FYI, 2.6.24 is considered fairly old relatively speaking.  With so much
activity going on for the embedded boards for arch/powerpc, you're sort
of missing out if you aren't running from the latest git trees.

Yes, I realize how ridiculous it sounds to say a kernel that was just
released 3 days ago is old, but that's reality.

josh

Re: Reminder: removal of arch/ppc - (Sequoia)

[Steve Heflin]

At 09:00 PM 1/27/2008, Josh wrote:
>On Sun, 27 Jan 2008 18:37:22 -0500
>Steve Heflin <sheflin@newagemicro.com> wrote:
>
> > Hello!
> >
> > Yes! I'm looking at 2.6.23.14 as I thought that was the newest
> > version. I completely missed seeing the 2.6.24 kit, thank you so much!!
>
>FYI, 2.6.24 is considered fairly old relatively speaking.  With so much
>activity going on for the embedded boards for arch/powerpc, you're sort
>of missing out if you aren't running from the latest git trees.
>
>Yes, I realize how ridiculous it sounds to say a kernel that was just
>released 3 days ago is old, but that's reality.
>
>josh

Hey Josh, thank you so much for the pointer to the git trees. I've 
been using Linus' kernel.org tree, as that's where I was pointed to 
by the powerpc web site about 2 months ago. I sure do appreciate your 
updated pointer to the git tree, I will now locate it and stay tuned 
and participate.

steve

Preferred GIT URL for arch/powerpc Latest-and-Greatest (was Re: Reminder: removal of arch/ppc - (Sequoia))

[Grant Erickson]

On 1/27/08 6:00 PM, Josh Boyer wrote:
> On Sun, 27 Jan 2008 18:37:22 -0500
> Steve Heflin <sheflin@newagemicro.com> wrote:
> 
>> Hello!
>> 
>> Yes! I'm looking at 2.6.23.14 as I thought that was the newest
>> version. I completely missed seeing the 2.6.24 kit, thank you so much!!
> 
> FYI, 2.6.24 is considered fairly old relatively speaking.  With so much
> activity going on for the embedded boards for arch/powerpc, you're sort
> of missing out if you aren't running from the latest git trees.
> 
> Yes, I realize how ridiculous it sounds to say a kernel that was just
> released 3 days ago is old, but that's reality.
> 
> josh

What's the best/preferred GIT URL for current, up-to-date arch/powerpc
activity? Is it?

    git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

I am particularly interested in Kilauea/Haleakala-related development.

Regards,

Grant Erickson

Re: Preferred GIT URL for arch/powerpc Latest-and-Greatest (was Re: Reminder: removal of arch/ppc - (Sequoia))

[Josh Boyer]

On Mon, 28 Jan 2008 09:01:12 -0800
Grant Erickson <gerickson@nuovations.com> wrote:

> On 1/27/08 6:00 PM, Josh Boyer wrote:
> > On Sun, 27 Jan 2008 18:37:22 -0500
> > Steve Heflin <sheflin@newagemicro.com> wrote:
> > 
> >> Hello!
> >> 
> >> Yes! I'm looking at 2.6.23.14 as I thought that was the newest
> >> version. I completely missed seeing the 2.6.24 kit, thank you so much!!
> > 
> > FYI, 2.6.24 is considered fairly old relatively speaking.  With so much
> > activity going on for the embedded boards for arch/powerpc, you're sort
> > of missing out if you aren't running from the latest git trees.
> > 
> > Yes, I realize how ridiculous it sounds to say a kernel that was just
> > released 3 days ago is old, but that's reality.
> > 
> > josh
> 
> What's the best/preferred GIT URL for current, up-to-date arch/powerpc
> activity? Is it?
> 
>     git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

Yep, that's the canonical source.

> I am particularly interested in Kilauea/Haleakala-related development.

My tree:

git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git 

might briefly have some stuff for those that Paul's doesn't at times,
but as of right now they are synced up.  Typically there are only
changes on the next kernel branch during the development period for
that particular version.

josh

Preferred GIT URL for arch/powerpc, and BINUTILS

[Steve Heflin]

Josh, you're a life saver!!  Your GIT tree is exactly what I've been 
looking for. I have an AMCC440EPx based product that makes heavy use 
of all the devices embedded in the microcontroller. I'll be able to 
give that platform a very good testing.

Now can you help me with BINUTILS?  What version do you use and can 
you point me to a decent GIT tree for it?  I tried to use version 
2.18 and the build blows up because it tries to "strip" a script file 
"embedspu".

thanks so much,
Steve