From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: linuxppc-dev@ozlabs.org
Subject: [PATCH] [POWERPC] get rid of `model = "UCC"' in the ucc nodes
Date: Fri, 1 Feb 2008 18:01:26 +0300 [thread overview]
Message-ID: <20080201150126.GB26545@localhost.localdomain> (raw)
It isn't used anywhere, so remove it. If we'll ever need something
like this, we'll use compatible property instead.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
Rebased on top of recent tree.
Documentation/powerpc/booting-without-of.txt | 1 -
arch/powerpc/boot/dts/mpc832x_mds.dts | 3 ---
arch/powerpc/boot/dts/mpc832x_rdb.dts | 2 --
arch/powerpc/boot/dts/mpc836x_mds.dts | 2 --
arch/powerpc/boot/dts/mpc8568mds.dts | 2 --
5 files changed, 0 insertions(+), 10 deletions(-)
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 410c847..dcf9758 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1675,7 +1675,6 @@ platforms are moved over to use the flattened-device-tree model.
ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
- model = "UCC";
device-id = <1>;
reg = <2000 200>;
interrupts = <a0 0>;
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 9bb4083..f8b4a37 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -255,7 +255,6 @@
enet0: ucc@2200 {
device_type = "network";
compatible = "ucc_geth";
- model = "UCC";
cell-index = <3>;
device-id = <3>;
reg = <0x2200 0x200>;
@@ -271,7 +270,6 @@
enet1: ucc@3200 {
device_type = "network";
compatible = "ucc_geth";
- model = "UCC";
cell-index = <4>;
device-id = <4>;
reg = <0x3200 0x200>;
@@ -287,7 +285,6 @@
ucc@2400 {
device_type = "serial";
compatible = "ucc_uart";
- model = "UCC";
device-id = <5>; /* The UCC number, 1-7*/
port-number = <0>; /* Which ttyQEx device */
soft-uart; /* We need Soft-UART */
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 94f93d2..ea7fcbf 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -208,7 +208,6 @@
enet0: ucc@3000 {
device_type = "network";
compatible = "ucc_geth";
- model = "UCC";
cell-index = <2>;
device-id = <2>;
reg = <0x3000 0x200>;
@@ -224,7 +223,6 @@
enet1: ucc@2200 {
device_type = "network";
compatible = "ucc_geth";
- model = "UCC";
cell-index = <3>;
device-id = <3>;
reg = <0x2200 0x200>;
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 55f03e8..525423c 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -257,7 +257,6 @@
enet0: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
- model = "UCC";
cell-index = <1>;
device-id = <1>;
reg = <0x2000 0x200>;
@@ -274,7 +273,6 @@
enet1: ucc@3000 {
device_type = "network";
compatible = "ucc_geth";
- model = "UCC";
cell-index = <2>;
device-id = <2>;
reg = <0x3000 0x200>;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 97bc048..66087d5 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -324,7 +324,6 @@
enet2: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
- model = "UCC";
cell-index = <1>;
device-id = <1>;
reg = <2000 200>;
@@ -341,7 +340,6 @@
enet3: ucc@3000 {
device_type = "network";
compatible = "ucc_geth";
- model = "UCC";
cell-index = <2>;
device-id = <2>;
reg = <3000 200>;
--
1.5.2.2
next reply other threads:[~2008-02-01 15:01 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-01 15:01 Anton Vorontsov [this message]
2008-02-01 15:32 ` [PATCH] [POWERPC] get rid of `model = "UCC"' in the ucc nodes Kumar Gala
2008-02-01 16:23 ` Grant Likely
2008-02-05 13:20 ` David Gibson
2008-02-05 16:39 ` Grant Likely
2008-02-08 6:14 ` David Gibson
2008-02-01 17:33 ` [PATCH] [POWERPC][NET][SERIAL] UCCs: replace device-id with cell-index (was: Re: [PATCH] [POWERPC] get rid of `model = "UCC"' in the ucc nodes) Anton Vorontsov
2008-02-01 17:52 ` [PATCH] [POWERPC][NET][SERIAL] UCCs: replace device-id with cell-index Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080201150126.GB26545@localhost.localdomain \
--to=avorontsov@ru.mvista.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).