From: Yuri Tikhonov <yur@emcraft.com>
To: linuxppc-dev@ozlabs.org
Cc: Paul Mackerras <paulus@samba.org>
Subject: [PATCH 1/1] [PPC] 8xx swap bug-fix
Date: Sat, 2 Feb 2008 10:47:31 +0300 [thread overview]
Message-ID: <200802021047.32055.yur@emcraft.com> (raw)
In-Reply-To: <20080201181003.a3daf6ed.kim.phillips@freescale.com>
Hello,
Here is the patch which makes Linux-2.6 swap routines operate correctly on
the ppc-8xx-based machines.
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
--
diff --git a/arch/ppc/kernel/head_8xx.S b/arch/ppc/kernel/head_8xx.S
index eb8d26f..321bda2 100644
--- a/arch/ppc/kernel/head_8xx.S
+++ b/arch/ppc/kernel/head_8xx.S
@@ -329,8 +329,18 @@ InstructionTLBMiss:
mfspr r11, SPRN_MD_TWC /* ....and get the pte address */
lwz r10, 0(r11) /* Get the pte */
+#ifdef CONFIG_SWAP
+ /* do not set the _PAGE_ACCESSED bit of a non-present page */
+ andi. r11, r10, _PAGE_PRESENT
+ beq 4f
+ ori r10, r10, _PAGE_ACCESSED
+ mfspr r11, SPRN_MD_TWC /* get the pte address again */
+ stw r10, 0(r11)
+4:
+#else
ori r10, r10, _PAGE_ACCESSED
stw r10, 0(r11)
+#endif
/* The Linux PTE won't go exactly into the MMU TLB.
* Software indicator bits 21, 22 and 28 must be clear.
@@ -395,8 +405,17 @@ DataStoreTLBMiss:
DO_8xx_CPU6(0x3b80, r3)
mtspr SPRN_MD_TWC, r11
- mfspr r11, SPRN_MD_TWC /* get the pte address again */
+#ifdef CONFIG_SWAP
+ /* do not set the _PAGE_ACCESSED bit of a non-present page */
+ andi. r11, r10, _PAGE_PRESENT
+ beq 4f
+ ori r10, r10, _PAGE_ACCESSED
+4:
+ /* and update pte in table */
+#else
ori r10, r10, _PAGE_ACCESSED
+#endif
+ mfspr r11, SPRN_MD_TWC /* get the pte address again */
stw r10, 0(r11)
/* The Linux PTE won't go exactly into the MMU TLB.
@@ -575,7 +594,16 @@ DataTLBError:
/* Update 'changed', among others.
*/
+#ifdef CONFIG_SWAP
+ ori r10, r10, _PAGE_DIRTY|_PAGE_HWWRITE
+ /* do not set the _PAGE_ACCESSED bit of a non-present page */
+ andi. r11, r10, _PAGE_PRESENT
+ beq 4f
+ ori r10, r10, _PAGE_ACCESSED
+4:
+#else
ori r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+#endif
mfspr r11, SPRN_MD_TWC /* Get pte address again */
stw r10, 0(r11) /* and update pte in table */
diff --git a/include/asm-ppc/pgtable.h b/include/asm-ppc/pgtable.h
index c159315..76717ff 100644
--- a/include/asm-ppc/pgtable.h
+++ b/include/asm-ppc/pgtable.h
@@ -341,14 +341,6 @@ extern unsigned long ioremap_bot, ioremap_base;
#define _PMD_PAGE_MASK 0x000c
#define _PMD_PAGE_8M 0x000c
-/*
- * The 8xx TLB miss handler allegedly sets _PAGE_ACCESSED in the PTE
- * for an address even if _PAGE_PRESENT is not set, as a performance
- * optimization. This is a bug if you ever want to use swap unless
- * _PAGE_ACCESSED is 2, which it isn't, or unless you have 8xx-specific
- * definitions for __swp_entry etc. below, which would be gross.
- * -- paulus
- */
#define _PTE_NONE_MASK _PAGE_ACCESSED
#else /* CONFIG_6xx */
--
Yuri Tikhonov, Senior Software Engineer
Emcraft Systems, www.emcraft.com
next prev parent reply other threads:[~2008-02-02 7:47 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-02 0:10 [PATCH 3/3] powerpc: mpc83xx_defconfig: enable math emulation and ucc_geth Kim Phillips
2008-02-02 7:47 ` Yuri Tikhonov [this message]
2008-02-02 11:22 ` [PATCH 1/1] [PPC] 8xx swap bug-fix Jochen Friedrich
2008-02-02 11:30 ` Yuri Tikhonov
2008-02-04 18:24 ` Scott Wood
2008-02-04 22:38 ` Vitaly Bordug
2008-02-21 12:21 ` Wolfgang Denk
2008-02-21 22:57 ` Vitaly Bordug
2008-02-05 6:46 ` Yuri Tikhonov
2008-02-05 10:01 ` Jochen Friedrich
2008-02-05 7:37 ` Benjamin Herrenschmidt
2008-03-10 14:39 ` Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200802021047.32055.yur@emcraft.com \
--to=yur@emcraft.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).