From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from outbound2-sin-R.bigfish.com (outbound-sin.frontbridge.com [207.46.51.80]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client CN "*.bigfish.com", Issuer "*.bigfish.com" (not verified)) by ozlabs.org (Postfix) with ESMTP id DCB50DDDF3 for ; Thu, 21 Feb 2008 13:27:12 +1100 (EST) MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Subject: RE: Problems with plb_temac+hard_temac+2.6.24rc3 Date: Wed, 20 Feb 2008 19:26:42 -0700 In-Reply-To: <47BC563D.4040003@gmail.com> References: <47BC563D.4040003@gmail.com> From: "Rick Moleres" To: "A. Nolson" , Message-Id: <20080221022651.1383190008A@mail125-sin.bigfish.com> List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Try using hard_temac_v3_00_a with the ML403 board. There's an incompatibility (posted previously on this list) with PHY access. This could be causing the strange behavior you're seeing. -Rick -----Original Message----- From: linuxppc-embedded-bounces+moleres=3Dxilinx.com@ozlabs.org [mailto:linuxppc-embedded-bounces+moleres=3Dxilinx.com@ozlabs.org] On Behalf Of A. Nolson Sent: Wednesday, February 20, 2008 8:33 AM To: linuxppc-embedded@ozlabs.org Subject: Problems with plb_temac+hard_temac+2.6.24rc3 Hi, I am working with a ML403 platform and I have my kernel 2.6.24rc3=20 perfectly running on it. Almost everything seems to work but the=20 ethernet. I am using the IP cores that come with the EDK 9.1sp2 (=20 plb_emac 3.00a + hard_temac 3.00b). The weird thing arises when I try to bring up the interface and use it. If I do "ifconfig eth0 up" the=20 interface shows up but, strangely, it eithers not receives or send=20 packets. I will explain myself, if I assing an IP manually and try to=20 connect to another worksatation within the network ( by pinging from=20 just one of the sides for example ) the interface seems only to send or receive packets , but generallty not both at the same time ( I can see=20 this through the evolution of the Rx/Tx bytes in ifconfig). The only few times that both tx/rx work at the same time is when I do (ifconfig eth0=20 down and ifconfig eth0 up), but this only works sporadically and only =20 for around a second or less. This is what I get after the first "ifconfig eth0 up": [ 293.258765] eth0: XTemac: Options: 0xb8f2 [ 295.253048] eth0: XTemac: speed set to 10Mb/s [ 295.256042] eth0: XTemac: Send Threshold =3D 16, Receive Threshold = =3D 2 [ 295.256095] eth0: XTemac: Send Wait bound =3D 1, Receive Wait bound = =3D 1 [ 297.252047] eth0: XTemac: PHY Link carrier lost. [ 299.251657] eth0: XTemac: PHY Link carrier restored. and this after some ifconfig up/down: [ 293.258765] eth0: XTemac: Options: 0xb8f2 [ 295.253048] eth0: XTemac: speed set to 10Mb/s [ 295.256042] eth0: XTemac: Send Threshold =3D 16, Receive Threshold = =3D 2 [ 295.256095] eth0: XTemac: Send Wait bound =3D 1, Receive Wait bound = =3D 1 [ 297.252047] eth0: XTemac: PHY Link carrier lost. [ 299.251657] eth0: XTemac: PHY Link carrier restored. [ 438.159833] eth0: XTemac: Options: 0xb8f2 [ 440.154122] eth0: XTemac: speed set to 1000Mb/s [ 440.157316] eth0: XTemac: Send Threshold =3D 16, Receive Threshold = =3D 2 [ 440.157369] eth0: XTemac: Send Wait bound =3D 1, Receive Wait bound = =3D 1 [ 442.153739] eth0: XTemac: PHY Link carrier lost. [ 511.255518] eth0: XTemac: Options: 0xb8f2 [ 513.249808] eth0: XTemac: speed set to 10Mb/s [ 513.252729] eth0: XTemac: Send Threshold =3D 16, Receive Threshold = =3D 2 [ 513.252784] eth0: XTemac: Send Wait bound =3D 1, Receive Wait bound = =3D 1 [ 515.249462] eth0: XTemac: PHY Link carrier restored. [ 992.441619] eth0: XTemac: Options: 0xb8f2 [ 994.435904] eth0: XTemac: speed set to 1000Mb/s [ 994.438786] eth0: XTemac: Send Threshold =3D 16, Receive Threshold = =3D 2 [ 994.438839] eth0: XTemac: Send Wait bound =3D 1, Receive Wait bound = =3D 1 [ 996.435460] eth0: XTemac: PHY Link carrier lost. [ 1099.850622] eth0: XTemac: Options: 0xb8f2 [ 1101.844907] eth0: XTemac: speed set to 10Mb/s [ 1101.847816] eth0: XTemac: Send Threshold =3D 16, Receive Threshold = =3D 2 [ 1101.847868] eth0: XTemac: Send Wait bound =3D 1, Receive Wait bound = =3D 1 [ 1103.844479] eth0: XTemac: PHY Link carrier restored. [ 1180.024979] eth0: XTemac: Options: 0xb8f2 [ 1182.019263] eth0: XTemac: speed set to 1000Mb/s [ 1182.022265] eth0: XTemac: Send Threshold =3D 16, Receive Threshold = =3D 2 [ 1182.022316] eth0: XTemac: Send Wait bound =3D 1, Receive Wait bound = =3D 1 [ 1184.018815] eth0: XTemac: PHY Link carrier lost. It also seems to negotiate wrongly the speed since my network is 100Mb/s. This is my dmesg before "ifconfig eth0 up": [ 0.000000] Linux version 2.6.24-rc3-gd7ed933b-dirty (ios@xxx) (gcc=20 versio ion 4.0.0 (DENX ELDK 4.1 4.0.0)) #17 Mon Feb 18 11:52:47 CET=20 2008 [ [ 0.000000] Xilinx ML403 Reference System (Virtex-4=20 FX) [ [ 0.000000] Entering add_active_range(0, 0, 16384) 0 entries of 256=20 used [ [ 0.000000] Zone PFN=20 ranges: [ [ 0.000000] DMA 0 -> =20 16384 [ [ 0.000000] Normal 16384 -> =20 16384 [ [ 0.000000] HighMem 16384 -> =20 16384 [ [ 0.000000] Movable zone start PFN for each=20 node [ [ 0.000000] early_node_map[1] active PFN=20 ranges [ [ 0.000000] 0: 0 -> =20 16384 [ [ 0.000000] On node 0 totalpages:=20 16384 [ [ 0.000000] DMA zone: 128 pages used for=20 memmap [ [ 0.000000] DMA zone: 0 pages=20 reserved [ [ 0.000000] DMA zone: 16256 pages, LIFO=20 batch:3 [ [ 0.000000] Normal zone: 0 pages used for=20 memmap [ [ 0.000000] HighMem zone: 0 pages used for=20 memmap [ [ 0.000000] Movable zone: 0 pages used for=20 memmap [ [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. =20 Total pages es:=20 16256 [ [ 0.000000] Kernel command line: console=3DttyS0,57600 = root=3D/dev/xsa2=20 rw init=3D/sb sbin/init [ [ 0.000000] Xilinx INTC #0 at 0x41200000 mapped to=20 0xFDFFE000 [ [ 0.000000] PID hash table entries: 256 (order: 8, 1024=20 bytes) [ [ 0.000189] Console: colour dummy device=20 80x25 [ [ 0.000632] Dentry cache hash table entries: 8192 (order: 3, 32768=20 bytes) [ [ 0.001411] Inode-cache hash table entries: 4096 (order: 2, 16384=20 bytes) [ [ 0.015628] Memory: 61312k available (2744k kernel code, 780k data,=20 116k init, , 0k=20 highmem) [ [ 0.015942] SLUB: Genslabs=3D11, HWalign=3D32, Order=3D0-1, = MinObjects=3D4,=20 CPUs=3D1, Nod odes=3D1 [ [ 0.015988] Calibrating delay loop... 199.47 BogoMIPS=20 (lpj=3D997376) [ [ 0.210274] Mount-cache hash table entries:=20 512 [ [ 0.214569] net_namespace: 64=20 bytes [ [ 0.220610] NET: Registered protocol family=20 16 [ [ 0.268325] NET: Registered protocol family=20 2 [ [ 0.350699] IP route cache hash table entries: 1024 (order: 0, 4096=20 bytes) [ [ 0.353529] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ [ 0.353862] TCP bind hash table entries: 2048 (order: 1, 8192=20 bytes) [ [ 0.354067] TCP: Hash tables configured (established 2048 bind=20 2048) [ [ 0.354107] TCP reno=20 registered [ [ 0.381445] sysctl table check failed: /kernel/l2cr .1.31 Missing=20 strategy [ [ 0.381529] Call=20 Trace: [ [ 0.381556] [c3c11e80] [c0008380] show_stack+0x4c/0x174=20 (unreliable) [ [ 0.381653] [c3c11eb0] [c0037170]=20 set_fail+0x50/0x68 [ [ 0.381735] [c3c11ed0] [c00377f8]=20 sysctl_check_table+0x670/0x6bc [ [ 0.381804] [c3c11f10] [c003780c]=20 sysctl_check_table+0x684/0x6bc [ [ 0.381871] [c3c11f50] [c0024e7c]=20 register_sysctl_table+0x5c/0xac [ [ 0.381953] [c3c11f70] [c034ab68]=20 register_ppc_htab_sysctl+0x18/0x2c [ [ 0.382040] [c3c11f80] [c034484c]=20 kernel_init+0xc8/0x284 [ [ 0.382103] [c3c11ff0] [c0004b18]=20 kernel_thread+0x44/0x60 [ [ 0.442249] Installing knfsd (copyright (C) 1996=20 okir@monad.swb.de). [ [ 0.447391] JFS: nTxBlock =3D 479, nTxLock =3D=20 3832 [ [ 0.450534] SGI XFS with ACLs, large block numbers, no debug=20 enabled [ [ 0.466636] io scheduler noop=20 registered [ [ 0.466687] io scheduler anticipatory=20 registered [ [ 0.466722] io scheduler deadline=20 registered [ [ 0.467224] io scheduler cfq registered=20 (default) [ [ 1.069672] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ=20 sharing di disabled [ [ 1.078357] serial8250.0: ttyS0 at MMIO 0x40401003 (irq =3D 3) is a=20 16550A [ [ 1.078443] console [ttyS0]=20 enabled [ [ 1.621990] RAMDISK driver initialized: 16 RAM disks of 4096K size=20 1024 blocksi size [ [ 1.644429] loop: module=20 loaded [ [ 1.651930] xsysace xsysace.0: Xilinx SystemACE revision=20 1.0.12 [ [ 1.664582] xsysace xsysace.0: capacity: 1019088=20 sectors [ [ 1.675836] xsa: xsa1 xsa2=20 xsa3 [ [ 1.688906] Xilinx SystemACE device driver,=20 major=3D254 [ [ 1.700197] nbd: registered device at major=20 43 [ [ 1.728380] XTemac: using sgDMA=20 mode. [ [ 1.735840] XTemac: using TxDRE=20 mode [ [ 1.743198] XTemac: using RxDRE=20 mode [ [ 1.750455] XTemac: buffer descriptor size: 32768=20 (0x8000) [ [ 1.762007] XTemac: (buffer_descriptor_init) phy: 0x3d98000, virt:=20 0xff100000, , size:=20 0x8000 [ [ 1.785641] eth%d: XTemac: No PHY detected. Assuming a PHY at=20 address 0 [ [ 1.799277] eth0: Dropping NETIF_F_SG since no checksum=20 feature. [ [ 1.814696] eth0: Xilinx TEMAC #0 at 0x81200000 mapped to 0xC5060000, irq=3D0 [ [ 1.828792] eth0: XTemac id 1.0f, block id 5, type=20 8 [ [ 1.840200] NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c=20 $Revision: 1 1.41=20 $ [ [ 1.856295] INFTL: inftlcore.c $Revision: 1.19 $, inftlmount.c=20 $Revision: 1.18 8=20 $ [ [ 1.872015] SSFDC read-only Flash Translation=20 layer [ [ 1.885404] i8042.c: No controller=20 found. [ [ 1.895700] mice: PS/2 mouse device common for all=20 mice [ [ 1.908819] i2c /dev entries=20 driver [ [ 1.917372] TCP cubic=20 registered [ [ 1.924238] NET: Registered protocol family=20 1 [ [ 1.933271] NET: Registered protocol family=20 17 [ [ 1.944649] RPC: Registered udp transport=20 module. [ [ 1.954206] RPC: Registered tcp transport=20 module. [ [ 4.575003] kjournald starting. Commit interval 5=20 seconds [ [ 4.586220] EXT3-fs warning: maximal mount count reached, running=20 e2fsck is rec ecommended [ [ 4.641727] EXT3 FS on xsa2, internal=20 journal [ [ 4.650587] EXT3-fs: recovery=20 complete. [ [ 4.697624] EXT3-fs: mounted filesystem with ordered data=20 mode. [ [ 4.709702] VFS: Mounted root (ext3=20 filesystem). [ [ 4.719390] Freeing unused kernel memory: 116k=20 init =20 ba =20 Any idea of what it can be? Thanks in advance! /A _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded