From: Stefan Roese <sr@denx.de>
To: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Cc: linuxppc-dev@ozlabs.org
Subject: Re: [PATCH] [POWERPC] AMCC Kilauea (405EX): Disable EMAC loopback mode
Date: Fri, 22 Feb 2008 22:49:58 +0100 [thread overview]
Message-ID: <200802222249.58503.sr@denx.de> (raw)
In-Reply-To: <20080222143621.0579729b@weaponx>
On Friday 22 February 2008, Josh Boyer wrote:
> On Fri, 22 Feb 2008 09:32:12 +0100
>
> Stefan Roese <sr@denx.de> wrote:
> > 405EX(r) has SDR0_MFR[E0CS/E1CS] set after reset. This selects
> > the internal loopback mode. Clear these bits so that both EMACs
> > don't use loopback mode as default.
> >
> > Signed-off-by: Stefan Roese <sr@denx.de>
> > ---
> > I'm not sure if this should be done here in the board platform code,
> > or in the newemac driver or perhaps in some code common for 405EX.
> >
> > Any thoughts on this welcome.
>
> Why isn't this done in U-Boot? Or is it done if the network interface
> is used?
Correct. It's only done upon EMAC usage in U-Boot. So when booting completely
from FLASH, EMAC in Linux is not working.
Best regards,
Stefan
next prev parent reply other threads:[~2008-02-22 21:50 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-22 8:32 [PATCH] [POWERPC] AMCC Kilauea (405EX): Disable EMAC loopback mode Stefan Roese
2008-02-22 20:36 ` Josh Boyer
2008-02-22 21:49 ` Stefan Roese [this message]
2008-02-22 21:27 ` Benjamin Herrenschmidt
2008-02-22 21:54 ` Stefan Roese
2008-04-21 23:46 ` Benjamin Herrenschmidt
2008-04-22 5:15 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200802222249.58503.sr@denx.de \
--to=sr@denx.de \
--cc=jwboyer@linux.vnet.ibm.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).