From: Philippe De Muyter <phdm@macqel.be>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Scott Wood <scottwood@freescale.com>, linuxppc-dev@ozlabs.org
Subject: Re: ARCH=ppc -> ARCH=powerpc : help needed for dts file
Date: Tue, 4 Mar 2008 10:10:59 +0100 [thread overview]
Message-ID: <20080304091059.GD18829@netgate.macqel> (raw)
In-Reply-To: <1204618939.21545.52.camel@pasglop>
[-- Attachment #1: Type: text/plain, Size: 3486 bytes --]
Hi Ben,
On Tue, Mar 04, 2008 at 07:22:19PM +1100, Benjamin Herrenschmidt wrote:
>
> On Tue, 2008-03-04 at 09:08 +0100, Philippe De Muyter wrote:
> > With ARCH=ppc, all those interrupt's info's are hardcoded in the .c
> > files.
> > But I expected I could fill the dts file for ARCH=powerpc from info's
> > I
> > could collect in /proc on a running ARCH=ppc linux without dts file
> > for the same board.
>
> Rather, look at the C file. Send it and we can help figuring things out.
Thanks in advance
Philippe
I also attach my current (not working) dts file attempt. It is actually
a modified mpc8540ads.dts file.
I now thinks that the ide-cs (hda) discovery or not depends on the cold
or warm reboot.
Here are the patches for my config (MEIP_8540) relative to a vanilla
linux-2.6.24. I hacked the MPC8540ADS config. The PCI4520 is the
multi-function chip from TI (dual-socket pc-card + iee1394 ohci and two-port
phy)
--- ./arch/ppc/platforms/85xx/mpc85xx_ads_common.cbk 2008-01-24 22:58:37.000000000 +0000
+++ ./arch/ppc/platforms/85xx/mpc85xx_ads_common.c 2008-02-20 16:54:33.000000000 +0000
@@ -58,6 +58,29 @@
/* Internal interrupts are all Level Sensitive, and Positive Polarity */
static u_char mpc85xx_ads_openpic_initsenses[] __initdata = {
MPC85XX_INTERNAL_IRQ_SENSES,
+#ifdef CONFIG_MEIP_8540
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), // External 0 : nINTPFO
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), // External 1 : nINTRTC
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), // External 2 : nINTPLD
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), // External 3 : nINTSTX
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), // External 4 : nINTPHY
+#if defined(CONFIG_PCI)
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5 : PCI4520 MFUNC 0 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 6 : PCI4520 MFUNC 1 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7 : PCI4520 MFUNC 2 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 8 : PCI4520 MFUNC 3 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 9 : PCI4520 MFUNC 4 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 10 : PCI4520 MFUNC 5 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 11 : PCI4520 MFUNC 6 */
+#else
+ 0x0, /* External 6: */
+ 0x0, /* External 7: */
+ 0x0, /* External 8: */
+ 0x0, /* External 9: */
+ 0x0, /* External 10: */
+ 0x0, /* External 11: */
+#endif
+#else
0x0, /* External 0: */
#if defined(CONFIG_PCI)
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI slot 0 */
@@ -77,6 +100,7 @@
0x0, /* External 9: */
0x0, /* External 10: */
0x0, /* External 11: */
+#endif
};
/* ************************************************************************ */
--- ./arch/ppc/platforms/85xx/mpc85xx_ads_common.hbk 2008-01-24 22:58:37.000000000 +0000
+++ ./arch/ppc/platforms/85xx/mpc85xx_ads_common.h 2008-02-20 16:36:07.000000000 +0000
@@ -29,10 +29,17 @@
extern void mpc85xx_ads_map_io(void) __init;
/* PCI interrupt controller */
+#ifdef CONFIG_MEIP_8540
+#define PIRQA MPC85xx_IRQ_EXT5
+#define PIRQB MPC85xx_IRQ_EXT6
+#define PIRQC MPC85xx_IRQ_EXT7
+#define PIRQD MPC85xx_IRQ_EXT8
+#else
#define PIRQA MPC85xx_IRQ_EXT1
#define PIRQB MPC85xx_IRQ_EXT2
#define PIRQC MPC85xx_IRQ_EXT3
#define PIRQD MPC85xx_IRQ_EXT4
+#endif
#define MPC85XX_PCI1_LOWER_IO 0x00000000
#define MPC85XX_PCI1_UPPER_IO 0x00ffffff
[-- Attachment #2: meip-8540.dts --]
[-- Type: text/plain, Size: 6576 bytes --]
/*
* MEIP-8540 Device Tree Source
*
* Copyright 2008 Macq Electronique SA
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/ {
model = "MEIP8540";
compatible = "MEIP8540", "MPC85xxADS";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8540@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <20>; // 32 bytes
i-cache-line-size = <20>; // 32 bytes
d-cache-size = <8000>; // L1, 32K
i-cache-size = <8000>; // L1, 32K
timebase-frequency = <0>; // 33 MHz, from uboot
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
};
};
memory {
device_type = "memory";
reg = <00000000 10000000>; // 256M at 0x0
};
soc8540@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
ranges = <0 e0000000 00100000>;
reg = <e0000000 00100000>; // CCSRBAR 1M
bus-frequency = <0>;
memory-controller@2000 {
compatible = "fsl,8540-memory-controller";
reg = <2000 1000>;
interrupt-parent = <&mpic>;
interrupts = <12 2>;
};
l2-cache-controller@20000 {
compatible = "fsl,8540-l2-cache-controller";
reg = <20000 1000>;
cache-line-size = <20>; // 32 bytes
cache-size = <40000>; // L2, 256K
interrupt-parent = <&mpic>;
interrupts = <10 2>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "i2c";
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <2b 2>;
interrupt-parent = <&mpic>;
dfsrr;
rtc@68 {
compatible = "stm,m41t81";
reg = <68>;
};
};
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <7 1>;
reg = <3>;
device_type = "ethernet-phy";
};
};
ethernet@24000 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <24000 1000>;
/*
* address is deprecated and will be removed
* in 2.6.25. Only recent versions of
* U-Boot support local-mac-address, however.
*/
address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <1d 2 1e 2 22 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
ethernet@25000 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <25000 1000>;
/*
* address is deprecated and will be removed
* in 2.6.25. Only recent versions of
* U-Boot support local-mac-address, however.
*/
address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <23 2 24 2 28 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
ethernet@26000 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "network";
model = "FEC";
compatible = "gianfar";
reg = <26000 1000>;
/*
* address is deprecated and will be removed
* in 2.6.25. Only recent versions of
* U-Boot support local-mac-address, however.
*/
address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy3>;
};
serial@4500 {
device_type = "serial";
compatible = "ns16550";
reg = <4500 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
/*
interrupts = <2a 2>;
*/
interrupts = <1a 2>;
interrupt-parent = <&mpic>;
};
serial@4600 {
device_type = "serial";
compatible = "ns16550";
reg = <4600 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
/*
interrupts = <2a 2>;
*/
interrupts = <1a 2>;
interrupt-parent = <&mpic>;
};
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <40000 40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
};
};
pci@e0008000 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x02 */
1000 0 0 1 &mpic 1 1
1000 0 0 2 &mpic 2 1
1000 0 0 3 &mpic 3 1
1000 0 0 4 &mpic 4 1
/* IDSEL 0x03 */
1800 0 0 1 &mpic 4 1
1800 0 0 2 &mpic 1 1
1800 0 0 3 &mpic 2 1
1800 0 0 4 &mpic 3 1
/* IDSEL 0x04 */
2000 0 0 1 &mpic 3 1
2000 0 0 2 &mpic 4 1
2000 0 0 3 &mpic 1 1
2000 0 0 4 &mpic 2 1
/* IDSEL 0x05 */
2800 0 0 1 &mpic 2 1
2800 0 0 2 &mpic 3 1
2800 0 0 3 &mpic 4 1
2800 0 0 4 &mpic 1 1
/* IDSEL 0x0c */
6000 0 0 1 &mpic 1 1
6000 0 0 2 &mpic 2 1
6000 0 0 3 &mpic 3 1
6000 0 0 4 &mpic 4 1
/* IDSEL 0x0d */
6800 0 0 1 &mpic 4 1
6800 0 0 2 &mpic 1 1
6800 0 0 3 &mpic 2 1
6800 0 0 4 &mpic 3 1
/* IDSEL 0x0e */
7000 0 0 1 &mpic 3 1
7000 0 0 2 &mpic 4 1
7000 0 0 3 &mpic 1 1
7000 0 0 4 &mpic 2 1
/* IDSEL 0x0f */
7800 0 0 1 &mpic 2 1
7800 0 0 2 &mpic 3 1
7800 0 0 3 &mpic 4 1
7800 0 0 4 &mpic 1 1
/* IDSEL 0x12 */
9000 0 0 1 &mpic 1 1
9000 0 0 2 &mpic 2 1
9000 0 0 3 &mpic 3 1
9000 0 0 4 &mpic 4 1
/* IDSEL 0x13 */
9800 0 0 1 &mpic 4 1
9800 0 0 2 &mpic 1 1
9800 0 0 3 &mpic 2 1
9800 0 0 4 &mpic 3 1
/* IDSEL 0x14 */
a000 0 0 1 &mpic 3 1
a000 0 0 2 &mpic 4 1
a000 0 0 3 &mpic 1 1
a000 0 0 4 &mpic 2 1
/* IDSEL 0x15 */
a800 0 0 1 &mpic 2 1
a800 0 0 2 &mpic 3 1
a800 0 0 3 &mpic 4 1
a800 0 0 4 &mpic 1 1>;
interrupt-parent = <&mpic>;
/* interrupts number are coded in hexa ! */
/*
interrupts = <18 2>;
interrupts = <12 2 19 2 1a 2 1b 2 35 2 36 2 37 2>;
*/
interrupts = <35 2 36 2 37 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e0008000 1000>;
compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
device_type = "pci";
};
};
next prev parent reply other threads:[~2008-03-04 9:11 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-03 14:47 ARCH=ppc -> ARCH=powerpc : help needed for dts file Philippe De Muyter
2008-03-03 14:54 ` Grant Likely
2008-03-03 17:07 ` Scott Wood
2008-03-03 21:05 ` Philippe De Muyter
2008-03-03 21:11 ` Scott Wood
2008-03-03 21:26 ` Philippe De Muyter
2008-03-03 21:41 ` Benjamin Herrenschmidt
2008-03-04 8:19 ` Philippe De Muyter
2008-03-03 21:55 ` Scott Wood
2008-03-04 8:08 ` Philippe De Muyter
2008-03-04 8:22 ` Benjamin Herrenschmidt
2008-03-04 9:10 ` Philippe De Muyter [this message]
2008-03-05 4:52 ` David Gibson
2008-03-05 5:01 ` Benjamin Herrenschmidt
2008-03-05 16:15 ` Philippe De Muyter
2008-03-05 20:14 ` Benjamin Herrenschmidt
2008-03-05 23:34 ` Philippe De Muyter
2008-03-05 16:32 ` Scott Wood
2008-03-05 23:46 ` Benjamin Herrenschmidt
2008-03-07 0:10 ` Philippe De Muyter
2008-03-07 0:19 ` Benjamin Herrenschmidt
2008-03-09 22:31 ` Philippe De Muyter
2008-03-09 22:36 ` Benjamin Herrenschmidt
2008-03-11 0:32 ` David Gibson
2008-03-11 11:46 ` Philippe De Muyter
2008-03-11 22:42 ` David Gibson
2008-05-06 22:54 ` Andy Fleming
2008-05-07 7:50 ` Philippe De Muyter
2008-05-07 7:54 ` Stephen Rothwell
2008-03-03 21:26 ` Benjamin Herrenschmidt
2008-03-04 8:34 ` Philippe De Muyter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080304091059.GD18829@netgate.macqel \
--to=phdm@macqel.be \
--cc=benh@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=scottwood@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).