From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: linuxppc-dev@ozlabs.org
Subject: [PATCH] [POWERPC] 83xx: MPC837xRDB's VSC7385 ethernet switch isn't on the MDIO bus
Date: Mon, 17 Mar 2008 20:52:08 +0300 [thread overview]
Message-ID: <20080317175208.GA17844@localhost.localdomain> (raw)
MDIO-less PHYs should use CONFIG_FIXED_PHY driver and appropriate
fixed-link property in the device tree.
If not, ethernet will not work:
e0024520:03 not found
eth1: Could not attach to PHY
IP-Config: Failed to open eth1
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
arch/powerpc/boot/dts/mpc8377_rdb.dts | 8 +-------
arch/powerpc/boot/dts/mpc8378_rdb.dts | 8 +-------
arch/powerpc/boot/dts/mpc8379_rdb.dts | 8 +-------
arch/powerpc/configs/mpc837x_rdb_defconfig | 2 +-
4 files changed, 4 insertions(+), 22 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index d2332fb..476f65a 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -164,12 +164,6 @@
reg = <0x2>;
device_type = "ethernet-phy";
};
- phy3: ethernet-phy@3 {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
};
enet0: ethernet@24000 {
@@ -195,7 +189,7 @@
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
- phy-handle = <&phy3>;
+ fixed-link = <1 1 1000 0 0>;
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 711f9a3..0e872a6 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -164,12 +164,6 @@
reg = <0x2>;
device_type = "ethernet-phy";
};
- phy3: ethernet-phy@3 {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
};
enet0: ethernet@24000 {
@@ -195,7 +189,7 @@
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
- phy-handle = <&phy3>;
+ fixed-link = <1 1 1000 0 0>;
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index c11ceb7..1eb8def 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -164,12 +164,6 @@
reg = <0x2>;
device_type = "ethernet-phy";
};
- phy3: ethernet-phy@3 {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
};
enet0: ethernet@24000 {
@@ -195,7 +189,7 @@
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
- phy-handle = <&phy3>;
+ fixed-link = <1 1 1000 0 0>;
};
serial0: serial@4500 {
diff --git a/arch/powerpc/configs/mpc837x_rdb_defconfig b/arch/powerpc/configs/mpc837x_rdb_defconfig
index 91d291e..c429a33 100644
--- a/arch/powerpc/configs/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/mpc837x_rdb_defconfig
@@ -425,7 +425,7 @@ CONFIG_MARVELL_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
--
1.5.2.2
next reply other threads:[~2008-03-17 17:52 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-17 17:52 Anton Vorontsov [this message]
2008-03-17 19:42 ` [PATCH] [POWERPC] 83xx: MPC837xRDB's VSC7385 ethernet switch isn't on the MDIO bus Joakim Tjernlund
2008-03-17 21:46 ` Timur Tabi
2008-03-17 22:22 ` Joakim Tjernlund
2008-03-17 23:08 ` Timur Tabi
2008-03-17 23:53 ` Joakim Tjernlund
2008-03-18 9:16 ` Joakim Tjernlund
2008-03-18 14:32 ` Timur Tabi
2008-03-18 15:19 ` Joakim Tjernlund
2008-03-18 15:21 ` Timur Tabi
2008-03-17 22:29 ` Joakim Tjernlund
2008-06-10 14:20 ` Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080317175208.GA17844@localhost.localdomain \
--to=avorontsov@ru.mvista.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).