[PATCH][POWERPC] bootwrapper: Add entries for tqm8540 and sbc85xx

[Grant Likely <grant.likely@secretlab.ca>]

From: Paul Gortmaker <paul.gortmaker@windriver.com>

The wrapper script didn't have entries for the TQM8540 board and the
SBC8548 or SBC8560 boards.  I've assumed that the TQM8540 console is
8250 based and not CPM based by looking at its defconfig.  There was
also a trailing * on the TQM8555 entry that I removed too.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---

Paulus; this fixes the broken defconfig issues that Adrian raised.  Can you
please pick this up for merger into 2.6.25?

Thanks,
g.

 arch/powerpc/boot/Makefile |    4 ++--
 arch/powerpc/boot/wrapper  |    4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 4974d9e..1aded8f 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -253,8 +253,8 @@ image-$(CONFIG_TQM8540)			+= cuImage.tqm8540
 image-$(CONFIG_TQM8541)			+= cuImage.tqm8541
 image-$(CONFIG_TQM8555)			+= cuImage.tqm8555
 image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
-image-$(CONFIG_SBC8548)			+= cuImage.tqm8548
-image-$(CONFIG_SBC8560)			+= cuImage.tqm8560
+image-$(CONFIG_SBC8548)			+= cuImage.sbc8548
+image-$(CONFIG_SBC8560)			+= cuImage.sbc8560
 
 # Board ports in arch/powerpc/platform/embedded6xx/Kconfig
 image-$(CONFIG_STORCENTER)		+= cuImage.storcenter
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index d50e498..8f8b849 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -174,10 +174,10 @@ cuboot*)
     *-mpc83*)
         platformo=$object/cuboot-83xx.o
         ;;
-    *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555*)
+    *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555)
         platformo=$object/cuboot-85xx-cpm2.o
         ;;
-    *-mpc85*)
+    *-mpc85*|*-tqm8540|*-sbc85*)
         platformo=$object/cuboot-85xx.o
         ;;
     esac