From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from semihalf.com (semihalf.com [206.130.101.55]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by ozlabs.org (Postfix) with ESMTPS id ACFADDEEE4 for ; Thu, 27 Mar 2008 08:07:23 +1100 (EST) Date: Wed, 26 Mar 2008 22:18:49 +0100 From: Bartlomiej Sieka To: Grant Likely Subject: [RESEND2][POWERPC] mpc5200: Amalgamated dts fixes and updates Message-ID: <20080326211846.GA1895@frozen.semihalf.com> References: <47E2723D.1090101@grandegger.com> <47E281B6.20702@denx.de> <47E2FC3E.1020705@semihalf.com> <20080321235633.GB345@frozen.semihalf.com> <20080326194526.GA17424@frozen.semihalf.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: Cc: linuxppc-dev@ozlabs.org, Anatolij Gustschin , Paul Mackerras List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , The bulk of this patch is taken from http://patchwork.ozlabs.org/linuxppc/patch?q=Balakowicz&id=16197, with few other updates. Signed-off-by: Marian Balakowicz diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts index 30737ea..2d25ca8 100644 --- a/arch/powerpc/boot/dts/cm5200.dts +++ b/arch/powerpc/boot/dts/cm5200.dts @@ -212,13 +212,30 @@ ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; - reg = <3000 800>; + reg = <3000 400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <3000 400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + interrupt-parent = <&mpc5200_pic>; + + phy0:ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; }; i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <3d40 40>; interrupts = <2 10 0>; @@ -231,4 +248,22 @@ reg = <8000 4000>; }; }; + + lpb { + model = "fsl,lpb"; + compatible = "fsl,lpb"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 fc000000 2000000>; + + // 16-bit flash device at LocalPlus Bus CS0 + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 2000000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + }; }; diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts index 76951ab..d86eba0 100644 --- a/arch/powerpc/boot/dts/motionpro.dts +++ b/arch/powerpc/boot/dts/motionpro.dts @@ -148,7 +148,6 @@ interrupt-parent = <&mpc5200_pic>; }; - spi@f00 { compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; reg = ; @@ -209,10 +208,25 @@ ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; - reg = <3000 800>; + reg = <3000 400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <3000 400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + interrupt-parent = <&mpc5200_pic>; + + phy0:ethernet-phy@2 { + device_type = "ethernet-phy"; + reg = <2>; + }; }; ata@3a00 { @@ -223,11 +237,19 @@ }; i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <3d40 40>; interrupts = <2 10 0>; interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; + + rtc@68 { + device_type = "rtc"; + compatible = "dallas,ds1339"; + reg = <68>; + }; }; sram@8000 { @@ -240,7 +262,8 @@ compatible = "fsl,lpb"; #address-cells = <2>; #size-cells = <1>; - ranges = <1 0 50000000 00010000 + ranges = <0 0 ff000000 01000000 + 1 0 50000000 00010000 2 0 50010000 00010000 3 0 50020000 00010000>; @@ -271,31 +294,15 @@ compatible = "promess,pro_module_dio"; reg = <3 800 2>; }; - }; - pci@f0000d00 { - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; - reg = ; - interrupt-map-mask = ; - interrupt-map = ; - clock-frequency = <0>; // From boot loader - interrupts = <2 8 0 2 9 0 2 a 0>; - interrupt-parent = <&mpc5200_pic>; - bus-range = <0 0>; - ranges = <42000000 0 80000000 80000000 0 20000000 - 02000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 b0000000 0 01000000>; + // 16-bit flash device at LocalPlus Bus CS0 + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 01000000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; }; }; diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts index c86464f..d2dc278 100644 --- a/arch/powerpc/boot/dts/tqm5200.dts +++ b/arch/powerpc/boot/dts/tqm5200.dts @@ -127,10 +127,25 @@ ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200-fec"; - reg = <3000 800>; + reg = <3000 400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <3000 400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + interrupt-parent = <&mpc5200_pic>; + + phy0:ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; }; ata@3a00 { @@ -141,11 +156,19 @@ }; i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; compatible = "fsl,mpc5200-i2c","fsl-i2c"; reg = <3d40 40>; interrupts = <2 10 0>; interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; + + rtc@68 { + device_type = "rtc"; + compatible = "dallas,ds1307"; + reg = <68>; + }; }; sram@8000 { @@ -154,6 +177,23 @@ }; }; + lpb { + model = "fsl,lpb"; + compatible = "fsl,lpb"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 fc000000 02000000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 02000000>; + bank-width = <4>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + }; + pci@f0000d00 { #interrupt-cells = <1>; #size-cells = <2>;