From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from server196.onecontrol.com (ip-66-129-110-196.name-host.com [66.129.110.196]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by ozlabs.org (Postfix) with ESMTPS id EB5E3DE0A4 for ; Fri, 28 Mar 2008 07:37:17 +1100 (EST) Date: Thu, 27 Mar 2008 16:36:45 -0400 To: linuxppc-embedded@ozlabs.org From: Steve Heflin Subject: Re: ppc platform for AMCC-440EPx - ELDK to the rescue Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Message-Id: <20080327203717.EB5E3DE0A4@ozlabs.org> List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , >In reply to my message <20080326130837.762DBDE2FB@ozlabs.org> > > I finally resolved my nightmare of getting linux-2.6.24/5... to work > > on my AMCC-440Epx - Sequoia spinoff board. Following a clue I derived > > from a reply from Wolfgang Denx, I went to the DENX Engineering site > > where I discoved and downloaded the ELDK for the ppc_4xxFP. the ELDK > > uses the ppc platform instead of the powerpc platform. FINALLY the Wolfgang replied At 06:22 PM 3/26/2008: >This is not exactly correct. Actually it supports both. Ah thank you for that info. I only said what I said because the 4xxFP installation set things up to use the arch/ppc and to my delight, it worked! I look forward to and will do all I can to help get the arch/powerpc platform working on my Sequoia spin-off board. I sent you email regarding my inability to do a ELDK build from scratch, did you get that? I'm trying to build it under a fully updated Fedora 7 system, and it hits the error: LD unable to locate -lssabi_krb5 . Any clue? thanks so much for your help, Steve