From: Dale Farnsworth <dale@farnsworth.org>
To: paulus@samba.org
Cc: linuxppc-dev@ozlabs.org
Subject: Re: [PATCH 1/9] [POWERPC] mv64x60: change FDT compatible prefix to mrvl
Date: Fri, 28 Mar 2008 16:42:41 -0700 [thread overview]
Message-ID: <20080328234241.GA30214@farnsworth.org> (raw)
In-Reply-To: <20080328233954.GA29499@farnsworth.org>
From: Dale Farnsworth <dale@farnsworth.org>
Follow the convention that compatible names are prefixed by the
vendor's stock ticker symbol. For Marvell Technology Group Ltd.,
that's MRVL.
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Acked-by: Mark A. Greer <mgreer@mvista.com>
Index: linux-2.6/arch/powerpc/boot/dts/prpmc2800.dts
===================================================================
--- linux-2.6.orig/arch/powerpc/boot/dts/prpmc2800.dts
+++ linux-2.6/arch/powerpc/boot/dts/prpmc2800.dts
@@ -44,7 +44,7 @@
#address-cells = <1>;
#size-cells = <1>;
model = "mv64360"; /* Default */
- compatible = "marvell,mv64x60";
+ compatible = "mrvl,mv64x60";
clock-frequency = <7f28155>; /* 133.333333 MHz */
reg = <f1000000 00010000>;
virtual-reg = <f1000000>;
@@ -72,7 +72,7 @@
#address-cells = <1>;
#size-cells = <0>;
device_type = "mdio";
- compatible = "marvell,mv64x60-mdio";
+ compatible = "mrvl,mv64x60-mdio";
ethernet-phy@1 {
device_type = "ethernet-phy";
compatible = "broadcom,bcm5421";
@@ -93,7 +93,7 @@
reg = <2000 2000>;
eth0 {
device_type = "network";
- compatible = "marvell,mv64x60-eth";
+ compatible = "mrvl,mv64x60-eth";
block-index = <0>;
interrupts = <20>;
interrupt-parent = <&/mv64x60/pic>;
@@ -102,7 +102,7 @@
};
eth1 {
device_type = "network";
- compatible = "marvell,mv64x60-eth";
+ compatible = "mrvl,mv64x60-eth";
block-index = <1>;
interrupts = <21>;
interrupt-parent = <&/mv64x60/pic>;
@@ -113,7 +113,7 @@
sdma@4000 {
device_type = "dma";
- compatible = "marvell,mv64x60-sdma";
+ compatible = "mrvl,mv64x60-sdma";
reg = <4000 c18>;
virtual-reg = <f1004000>;
interrupt-base = <0>;
@@ -123,7 +123,7 @@
sdma@6000 {
device_type = "dma";
- compatible = "marvell,mv64x60-sdma";
+ compatible = "mrvl,mv64x60-sdma";
reg = <6000 c18>;
virtual-reg = <f1006000>;
interrupt-base = <0>;
@@ -132,7 +132,7 @@
};
brg@b200 {
- compatible = "marvell,mv64x60-brg";
+ compatible = "mrvl,mv64x60-brg";
reg = <b200 8>;
clock-src = <8>;
clock-frequency = <7ed6b40>;
@@ -141,7 +141,7 @@
};
brg@b208 {
- compatible = "marvell,mv64x60-brg";
+ compatible = "mrvl,mv64x60-brg";
reg = <b208 8>;
clock-src = <8>;
clock-frequency = <7ed6b40>;
@@ -164,7 +164,7 @@
mpsc@8000 {
device_type = "serial";
- compatible = "marvell,mpsc";
+ compatible = "mrvl,mpsc";
reg = <8000 38>;
virtual-reg = <f1008000>;
sdma = <&/mv64x60/sdma@4000>;
@@ -184,7 +184,7 @@
mpsc@9000 {
device_type = "serial";
- compatible = "marvell,mpsc";
+ compatible = "mrvl,mpsc";
reg = <9000 38>;
virtual-reg = <f1009000>;
sdma = <&/mv64x60/sdma@6000>;
@@ -203,14 +203,14 @@
};
wdt@b410 { /* watchdog timer */
- compatible = "marvell,mv64x60-wdt";
+ compatible = "mrvl,mv64x60-wdt";
reg = <b410 8>;
timeout = <a>; /* wdt timeout in seconds */
};
i2c@c000 {
device_type = "i2c";
- compatible = "marvell,mv64x60-i2c";
+ compatible = "mrvl,mv64x60-i2c";
reg = <c000 20>;
virtual-reg = <f100c000>;
freq_m = <8>;
@@ -224,18 +224,18 @@
pic {
#interrupt-cells = <1>;
#address-cells = <0>;
- compatible = "marvell,mv64x60-pic";
+ compatible = "mrvl,mv64x60-pic";
reg = <0000 88>;
interrupt-controller;
};
mpp@f000 {
- compatible = "marvell,mv64x60-mpp";
+ compatible = "mrvl,mv64x60-mpp";
reg = <f000 10>;
};
gpp@f100 {
- compatible = "marvell,mv64x60-gpp";
+ compatible = "mrvl,mv64x60-gpp";
reg = <f100 20>;
};
@@ -244,7 +244,7 @@
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
- compatible = "marvell,mv64x60-pci";
+ compatible = "mrvl,mv64x60-pci";
reg = <0cf8 8>;
ranges = <01000000 0 0 88000000 0 01000000
02000000 0 80000000 80000000 0 08000000>;
@@ -281,28 +281,28 @@
};
cpu-error@0070 {
- compatible = "marvell,mv64x60-cpu-error";
+ compatible = "mrvl,mv64x60-cpu-error";
reg = <0070 10 0128 28>;
interrupts = <03>;
interrupt-parent = <&/mv64x60/pic>;
};
sram-ctrl@0380 {
- compatible = "marvell,mv64x60-sram-ctrl";
+ compatible = "mrvl,mv64x60-sram-ctrl";
reg = <0380 80>;
interrupts = <0d>;
interrupt-parent = <&/mv64x60/pic>;
};
pci-error@1d40 {
- compatible = "marvell,mv64x60-pci-error";
+ compatible = "mrvl,mv64x60-pci-error";
reg = <1d40 40 0c28 4>;
interrupts = <0c>;
interrupt-parent = <&/mv64x60/pic>;
};
mem-ctrl@1400 {
- compatible = "marvell,mv64x60-mem-ctrl";
+ compatible = "mrvl,mv64x60-mem-ctrl";
reg = <1400 60>;
interrupts = <11>;
interrupt-parent = <&/mv64x60/pic>;
Index: linux-2.6/arch/powerpc/boot/serial.c
===================================================================
--- linux-2.6.orig/arch/powerpc/boot/serial.c
+++ linux-2.6/arch/powerpc/boot/serial.c
@@ -119,7 +119,7 @@ int serial_console_init(void)
if (dt_is_compatible(devp, "ns16550"))
rc = ns16550_console_init(devp, &serial_cd);
- else if (dt_is_compatible(devp, "marvell,mpsc"))
+ else if (dt_is_compatible(devp, "mrvl,mpsc"))
rc = mpsc_console_init(devp, &serial_cd);
else if (dt_is_compatible(devp, "fsl,cpm1-scc-uart") ||
dt_is_compatible(devp, "fsl,cpm1-smc-uart") ||
Index: linux-2.6/arch/powerpc/platforms/embedded6xx/prpmc2800.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/embedded6xx/prpmc2800.c
+++ linux-2.6/arch/powerpc/platforms/embedded6xx/prpmc2800.c
@@ -49,13 +49,13 @@ static void __init prpmc2800_setup_arch(
* ioremap mpp and gpp registers in case they are later
* needed by prpmc2800_reset_board().
*/
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-mpp");
+ np = of_find_compatible_node(NULL, NULL, "mrvl,mv64x60-mpp");
reg = of_get_property(np, "reg", NULL);
paddr = of_translate_address(np, reg);
of_node_put(np);
mv64x60_mpp_reg_base = ioremap(paddr, reg[1]);
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-gpp");
+ np = of_find_compatible_node(NULL, NULL, "mrvl,mv64x60-gpp");
reg = of_get_property(np, "reg", NULL);
paddr = of_translate_address(np, reg);
of_node_put(np);
Index: linux-2.6/arch/powerpc/sysdev/mv64x60_dev.c
===================================================================
--- linux-2.6.orig/arch/powerpc/sysdev/mv64x60_dev.c
+++ linux-2.6/arch/powerpc/sysdev/mv64x60_dev.c
@@ -446,22 +446,22 @@ static int __init mv64x60_device_setup(v
int err;
id = 0;
- for_each_compatible_node(np, "serial", "marvell,mpsc")
+ for_each_compatible_node(np, "serial", "mrvl,mpsc")
if ((err = mv64x60_mpsc_device_setup(np, id++)))
goto error;
id = 0;
- for_each_compatible_node(np, "network", "marvell,mv64x60-eth")
+ for_each_compatible_node(np, "network", "mrvl,mv64x60-eth")
if ((err = mv64x60_eth_device_setup(np, id++)))
goto error;
id = 0;
- for_each_compatible_node(np, "i2c", "marvell,mv64x60-i2c")
+ for_each_compatible_node(np, "i2c", "mrvl,mv64x60-i2c")
if ((err = mv64x60_i2c_device_setup(np, id++)))
goto error;
/* support up to one watchdog timer */
- np = of_find_compatible_node(np, NULL, "marvell,mv64x60-wdt");
+ np = of_find_compatible_node(np, NULL, "mrvl,mv64x60-wdt");
if (np) {
if ((err = mv64x60_wdt_device_setup(np, id)))
goto error;
@@ -489,7 +489,7 @@ static int __init mv64x60_add_mpsc_conso
if (!np)
goto not_mpsc;
- if (!of_device_is_compatible(np, "marvell,mpsc"))
+ if (!of_device_is_compatible(np, "mrvl,mpsc"))
goto not_mpsc;
prop = of_get_property(np, "block-index", NULL);
Index: linux-2.6/arch/powerpc/sysdev/mv64x60_pci.c
===================================================================
--- linux-2.6.orig/arch/powerpc/sysdev/mv64x60_pci.c
+++ linux-2.6/arch/powerpc/sysdev/mv64x60_pci.c
@@ -86,14 +86,14 @@ static int __init mv64x60_sysfs_init(voi
struct platform_device *pdev;
const unsigned int *prop;
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60");
+ np = of_find_compatible_node(NULL, NULL, "mrvl,mv64x60");
if (!np)
return 0;
prop = of_get_property(np, "hs_reg_valid", NULL);
of_node_put(np);
- pdev = platform_device_register_simple("marvell,mv64x60", 0, NULL, 0);
+ pdev = platform_device_register_simple("mrvl,mv64x60", 0, NULL, 0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
@@ -166,6 +166,6 @@ void __init mv64x60_pci_init(void)
{
struct device_node *np;
- for_each_compatible_node(np, "pci", "marvell,mv64x60-pci")
+ for_each_compatible_node(np, "pci", "mrvl,mv64x60-pci")
mv64x60_add_bridge(np);
}
Index: linux-2.6/arch/powerpc/sysdev/mv64x60_pic.c
===================================================================
--- linux-2.6.orig/arch/powerpc/sysdev/mv64x60_pic.c
+++ linux-2.6/arch/powerpc/sysdev/mv64x60_pic.c
@@ -238,13 +238,13 @@ void __init mv64x60_init_irq(void)
const unsigned int *reg;
unsigned long flags;
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-gpp");
+ np = of_find_compatible_node(NULL, NULL, "mrvl,mv64x60-gpp");
reg = of_get_property(np, "reg", &size);
paddr = of_translate_address(np, reg);
mv64x60_gpp_reg_base = ioremap(paddr, reg[1]);
of_node_put(np);
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-pic");
+ np = of_find_compatible_node(NULL, NULL, "mrvl,mv64x60-pic");
reg = of_get_property(np, "reg", &size);
paddr = of_translate_address(np, reg);
mv64x60_irq_reg_base = ioremap(paddr, reg[1]);
Index: linux-2.6/arch/powerpc/sysdev/mv64x60_udbg.c
===================================================================
--- linux-2.6.orig/arch/powerpc/sysdev/mv64x60_udbg.c
+++ linux-2.6/arch/powerpc/sysdev/mv64x60_udbg.c
@@ -85,7 +85,7 @@ static void mv64x60_udbg_init(void)
if (!stdout)
return;
- for_each_compatible_node(np, "serial", "marvell,mpsc") {
+ for_each_compatible_node(np, "serial", "mrvl,mpsc") {
if (np == stdout)
break;
}
next prev parent reply other threads:[~2008-03-28 23:42 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-28 23:39 [PATCH 0/9] powerpc: mv64x60 and prpmc2800 DTS cleanups Dale Farnsworth
2008-03-28 23:42 ` Dale Farnsworth [this message]
2008-03-28 23:47 ` [PATCH 1/9] [POWERPC] mv64x60: change FDT compatible prefix to mrvl Grant Likely
2008-03-29 0:00 ` Dale Farnsworth
2008-03-29 0:12 ` Grant Likely
2008-03-30 23:44 ` David Gibson
2008-03-31 16:56 ` Dale Farnsworth
2008-04-01 1:53 ` David Gibson
2008-03-28 23:44 ` [PATCH 2/9] [POWERPC] prpmc2800: convert DTS to v1 and add labels Dale Farnsworth
2008-03-28 23:45 ` [PATCH 3/9] [POWERPC] prpmc2800: fix frequencies in prpmc2800.dts Dale Farnsworth
2008-03-28 23:47 ` [PATCH 4/9] [POWERPC] mv64x60: Fix FDT compatible names: mv64x60 => mv64360 Dale Farnsworth
2008-03-29 21:57 ` Olof Johansson
2008-03-30 19:20 ` Segher Boessenkool
2008-03-31 16:33 ` Dale Farnsworth
2008-03-28 23:48 ` [PATCH 5/9] [POWERPC] mv64x60: remove device tree absolute path references Dale Farnsworth
2008-03-28 23:49 ` [PATCH 6/9] [POWERPC] prpmc2800: clean up dts properties Dale Farnsworth
2008-03-29 21:59 ` Olof Johansson
2008-03-30 10:11 ` David Gibson
2008-03-31 16:43 ` Dale Farnsworth
2008-04-01 1:17 ` Segher Boessenkool
2008-04-01 2:22 ` David Gibson
2008-03-28 23:50 ` [PATCH 7/9] [POWERPC] mv643xx_eth: prepare to support multiple silicon blocks Dale Farnsworth
2008-03-28 23:51 ` [PATCH 8/9] [POWERPC] Document the mv64x60 device tree bindings Dale Farnsworth
2008-03-28 23:52 ` [PATCH 9/9] [POWERPC] prpmc2800 needs a dtbImage Dale Farnsworth
2008-03-28 23:56 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080328234241.GA30214@farnsworth.org \
--to=dale@farnsworth.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).