From: Dale Farnsworth <dale@farnsworth.org>
To: paulus@samba.org
Cc: linuxppc-dev@ozlabs.org
Subject: [PATCH 3/8 v3] [POWERPC] mv64x60: Fix FDT compatible names: mv64x60 => mv64360
Date: Mon, 7 Apr 2008 15:09:03 -0700 [thread overview]
Message-ID: <20080407220903.GC24979@farnsworth.org> (raw)
In-Reply-To: <20080407220027.GA24510@farnsworth.org>
From: Mark A. Greer <mgreer@mvista.com>
Compatible names should refer to a specific version of the hardware,
without wildcards. Change each instance of mv64x60 to mv64360, which
is the oldest version we currently support.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
---
arch/powerpc/boot/dts/prpmc2800.dts | 40 +++++++--------
arch/powerpc/boot/serial.c | 2
arch/powerpc/platforms/embedded6xx/prpmc2800.c | 4 -
arch/powerpc/sysdev/mv64x60_dev.c | 10 +--
arch/powerpc/sysdev/mv64x60_pci.c | 6 +-
arch/powerpc/sysdev/mv64x60_pic.c | 4 -
arch/powerpc/sysdev/mv64x60_udbg.c | 2
7 files changed, 34 insertions(+), 34 deletions(-)
Index: linux-2.6/arch/powerpc/boot/dts/prpmc2800.dts
===================================================================
--- linux-2.6.orig/arch/powerpc/boot/dts/prpmc2800.dts
+++ linux-2.6/arch/powerpc/boot/dts/prpmc2800.dts
@@ -46,7 +46,7 @@
#address-cells = <1>;
#size-cells = <1>;
model = "mv64360"; /* Default */
- compatible = "marvell,mv64x60";
+ compatible = "marvell,mv64360";
clock-frequency = <133333333>;
reg = <0xf1000000 0x10000>;
virtual-reg = <0xf1000000>;
@@ -74,7 +74,7 @@
#address-cells = <1>;
#size-cells = <0>;
device_type = "mdio";
- compatible = "marvell,mv64x60-mdio";
+ compatible = "marvell,mv64360-mdio";
PHY0: ethernet-phy@1 {
device_type = "ethernet-phy";
compatible = "broadcom,bcm5421";
@@ -95,7 +95,7 @@
reg = <0x2000 0x2000>;
eth0 {
device_type = "network";
- compatible = "marvell,mv64x60-eth";
+ compatible = "marvell,mv64360-eth";
block-index = <0>;
interrupts = <32>;
interrupt-parent = <&PIC>;
@@ -104,7 +104,7 @@
};
eth1 {
device_type = "network";
- compatible = "marvell,mv64x60-eth";
+ compatible = "marvell,mv64360-eth";
block-index = <1>;
interrupts = <33>;
interrupt-parent = <&PIC>;
@@ -115,7 +115,7 @@
SDMA0: sdma@4000 {
device_type = "dma";
- compatible = "marvell,mv64x60-sdma";
+ compatible = "marvell,mv64360-sdma";
reg = <0x4000 0xc18>;
virtual-reg = <0xf1004000>;
interrupt-base = <0>;
@@ -125,7 +125,7 @@
SDMA1: sdma@6000 {
device_type = "dma";
- compatible = "marvell,mv64x60-sdma";
+ compatible = "marvell,mv64360-sdma";
reg = <0x6000 0xc18>;
virtual-reg = <0xf1006000>;
interrupt-base = <0>;
@@ -134,7 +134,7 @@
};
BRG0: brg@b200 {
- compatible = "marvell,mv64x60-brg";
+ compatible = "marvell,mv64360-brg";
reg = <0xb200 0x8>;
clock-src = <8>;
clock-frequency = <133333333>;
@@ -143,7 +143,7 @@
};
BRG1: brg@b208 {
- compatible = "marvell,mv64x60-brg";
+ compatible = "marvell,mv64360-brg";
reg = <0xb208 0x8>;
clock-src = <8>;
clock-frequency = <133333333>;
@@ -166,7 +166,7 @@
MPSC0: mpsc@8000 {
device_type = "serial";
- compatible = "marvell,mpsc";
+ compatible = "marvell,mv64360-mpsc";
reg = <0x8000 0x38>;
virtual-reg = <0xf1008000>;
sdma = <&SDMA0>;
@@ -186,7 +186,7 @@
MPSC1: mpsc@9000 {
device_type = "serial";
- compatible = "marvell,mpsc";
+ compatible = "marvell,mv64360-mpsc";
reg = <0x9000 0x38>;
virtual-reg = <0xf1009000>;
sdma = <&SDMA1>;
@@ -205,14 +205,14 @@
};
wdt@b410 { /* watchdog timer */
- compatible = "marvell,mv64x60-wdt";
+ compatible = "marvell,mv64360-wdt";
reg = <0xb410 0x8>;
timeout = <10>; /* wdt timeout in seconds */
};
i2c@c000 {
device_type = "i2c";
- compatible = "marvell,mv64x60-i2c";
+ compatible = "marvell,mv64360-i2c";
reg = <0xc000 0x20>;
virtual-reg = <0xf100c000>;
freq_m = <8>;
@@ -226,18 +226,18 @@
PIC: pic {
#interrupt-cells = <1>;
#address-cells = <0>;
- compatible = "marvell,mv64x60-pic";
+ compatible = "marvell,mv64360-pic";
reg = <0x0 0x88>;
interrupt-controller;
};
mpp@f000 {
- compatible = "marvell,mv64x60-mpp";
+ compatible = "marvell,mv64360-mpp";
reg = <0xf000 0x10>;
};
gpp@f100 {
- compatible = "marvell,mv64x60-gpp";
+ compatible = "marvell,mv64360-gpp";
reg = <0xf100 0x20>;
};
@@ -246,7 +246,7 @@
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
- compatible = "marvell,mv64x60-pci";
+ compatible = "marvell,mv64360-pci";
reg = <0xcf8 0x8>;
ranges = <0x01000000 0x0 0x0
0x88000000 0x0 0x01000000
@@ -285,28 +285,28 @@
};
cpu-error@0070 {
- compatible = "marvell,mv64x60-cpu-error";
+ compatible = "marvell,mv64360-cpu-error";
reg = <0x70 0x10 0x128 0x28>;
interrupts = <3>;
interrupt-parent = <&PIC>;
};
sram-ctrl@0380 {
- compatible = "marvell,mv64x60-sram-ctrl";
+ compatible = "marvell,mv64360-sram-ctrl";
reg = <0x380 0x80>;
interrupts = <13>;
interrupt-parent = <&PIC>;
};
pci-error@1d40 {
- compatible = "marvell,mv64x60-pci-error";
+ compatible = "marvell,mv64360-pci-error";
reg = <0x1d40 0x40 0xc28 0x4>;
interrupts = <12>;
interrupt-parent = <&PIC>;
};
mem-ctrl@1400 {
- compatible = "marvell,mv64x60-mem-ctrl";
+ compatible = "marvell,mv64360-mem-ctrl";
reg = <0x1400 0x60>;
interrupts = <17>;
interrupt-parent = <&PIC>;
Index: linux-2.6/arch/powerpc/boot/serial.c
===================================================================
--- linux-2.6.orig/arch/powerpc/boot/serial.c
+++ linux-2.6/arch/powerpc/boot/serial.c
@@ -119,7 +119,7 @@ int serial_console_init(void)
if (dt_is_compatible(devp, "ns16550"))
rc = ns16550_console_init(devp, &serial_cd);
- else if (dt_is_compatible(devp, "marvell,mpsc"))
+ else if (dt_is_compatible(devp, "marvell,mv64360-mpsc"))
rc = mpsc_console_init(devp, &serial_cd);
else if (dt_is_compatible(devp, "fsl,cpm1-scc-uart") ||
dt_is_compatible(devp, "fsl,cpm1-smc-uart") ||
Index: linux-2.6/arch/powerpc/platforms/embedded6xx/prpmc2800.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/embedded6xx/prpmc2800.c
+++ linux-2.6/arch/powerpc/platforms/embedded6xx/prpmc2800.c
@@ -49,13 +49,13 @@ static void __init prpmc2800_setup_arch(
* ioremap mpp and gpp registers in case they are later
* needed by prpmc2800_reset_board().
*/
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-mpp");
+ np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-mpp");
reg = of_get_property(np, "reg", NULL);
paddr = of_translate_address(np, reg);
of_node_put(np);
mv64x60_mpp_reg_base = ioremap(paddr, reg[1]);
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-gpp");
+ np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp");
reg = of_get_property(np, "reg", NULL);
paddr = of_translate_address(np, reg);
of_node_put(np);
Index: linux-2.6/arch/powerpc/sysdev/mv64x60_dev.c
===================================================================
--- linux-2.6.orig/arch/powerpc/sysdev/mv64x60_dev.c
+++ linux-2.6/arch/powerpc/sysdev/mv64x60_dev.c
@@ -446,22 +446,22 @@ static int __init mv64x60_device_setup(v
int err;
id = 0;
- for_each_compatible_node(np, "serial", "marvell,mpsc")
+ for_each_compatible_node(np, "serial", "marvell,mv64360-mpsc")
if ((err = mv64x60_mpsc_device_setup(np, id++)))
goto error;
id = 0;
- for_each_compatible_node(np, "network", "marvell,mv64x60-eth")
+ for_each_compatible_node(np, "network", "marvell,mv64360-eth")
if ((err = mv64x60_eth_device_setup(np, id++)))
goto error;
id = 0;
- for_each_compatible_node(np, "i2c", "marvell,mv64x60-i2c")
+ for_each_compatible_node(np, "i2c", "marvell,mv64360-i2c")
if ((err = mv64x60_i2c_device_setup(np, id++)))
goto error;
/* support up to one watchdog timer */
- np = of_find_compatible_node(np, NULL, "marvell,mv64x60-wdt");
+ np = of_find_compatible_node(np, NULL, "marvell,mv64360-wdt");
if (np) {
if ((err = mv64x60_wdt_device_setup(np, id)))
goto error;
@@ -489,7 +489,7 @@ static int __init mv64x60_add_mpsc_conso
if (!np)
goto not_mpsc;
- if (!of_device_is_compatible(np, "marvell,mpsc"))
+ if (!of_device_is_compatible(np, "marvell,mv64360-mpsc"))
goto not_mpsc;
prop = of_get_property(np, "block-index", NULL);
Index: linux-2.6/arch/powerpc/sysdev/mv64x60_pci.c
===================================================================
--- linux-2.6.orig/arch/powerpc/sysdev/mv64x60_pci.c
+++ linux-2.6/arch/powerpc/sysdev/mv64x60_pci.c
@@ -86,14 +86,14 @@ static int __init mv64x60_sysfs_init(voi
struct platform_device *pdev;
const unsigned int *prop;
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60");
+ np = of_find_compatible_node(NULL, NULL, "marvell,mv64360");
if (!np)
return 0;
prop = of_get_property(np, "hs_reg_valid", NULL);
of_node_put(np);
- pdev = platform_device_register_simple("marvell,mv64x60", 0, NULL, 0);
+ pdev = platform_device_register_simple("marvell,mv64360", 0, NULL, 0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
@@ -166,6 +166,6 @@ void __init mv64x60_pci_init(void)
{
struct device_node *np;
- for_each_compatible_node(np, "pci", "marvell,mv64x60-pci")
+ for_each_compatible_node(np, "pci", "marvell,mv64360-pci")
mv64x60_add_bridge(np);
}
Index: linux-2.6/arch/powerpc/sysdev/mv64x60_pic.c
===================================================================
--- linux-2.6.orig/arch/powerpc/sysdev/mv64x60_pic.c
+++ linux-2.6/arch/powerpc/sysdev/mv64x60_pic.c
@@ -238,13 +238,13 @@ void __init mv64x60_init_irq(void)
const unsigned int *reg;
unsigned long flags;
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-gpp");
+ np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp");
reg = of_get_property(np, "reg", &size);
paddr = of_translate_address(np, reg);
mv64x60_gpp_reg_base = ioremap(paddr, reg[1]);
of_node_put(np);
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-pic");
+ np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-pic");
reg = of_get_property(np, "reg", &size);
paddr = of_translate_address(np, reg);
mv64x60_irq_reg_base = ioremap(paddr, reg[1]);
Index: linux-2.6/arch/powerpc/sysdev/mv64x60_udbg.c
===================================================================
--- linux-2.6.orig/arch/powerpc/sysdev/mv64x60_udbg.c
+++ linux-2.6/arch/powerpc/sysdev/mv64x60_udbg.c
@@ -85,7 +85,7 @@ static void mv64x60_udbg_init(void)
if (!stdout)
return;
- for_each_compatible_node(np, "serial", "marvell,mpsc") {
+ for_each_compatible_node(np, "serial", "marvell,mv64360-mpsc") {
if (np == stdout)
break;
}
next prev parent reply other threads:[~2008-04-07 22:09 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-07 22:00 [PATCH 0/8 v3] [POWERPC] mv64x60 and prpmc2800 DTS cleanups Dale Farnsworth
2008-04-07 22:07 ` [PATCH 1/8 v3] [POWERPC] prpmc2800: convert DTS to v1 and add labels Dale Farnsworth
2008-04-07 22:08 ` [PATCH 2/8 v3] [POWERPC] prpmc2800: fix frequencies in prpmc2800.dts Dale Farnsworth
2008-04-07 22:09 ` Dale Farnsworth [this message]
2008-04-07 22:09 ` [PATCH 4/8 v3] [POWERPC] mv64x60: remove device tree absolute path references Dale Farnsworth
2008-04-07 22:10 ` [PATCH 5/8 v3] [POWERPC] prpmc2800: clean up dts properties Dale Farnsworth
2008-04-07 22:11 ` [PATCH 6/8 v3] [POWERPC] mv643xx_eth: prepare to support multiple silicon blocks Dale Farnsworth
2008-04-07 22:12 ` [PATCH 7/8 v3] [POWERPC] Document the mv64x60 device tree bindings Dale Farnsworth
2008-04-07 22:13 ` [PATCH 8/8 v3] [POWERPC] prpmc2800 needs a dtbImage Dale Farnsworth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080407220903.GC24979@farnsworth.org \
--to=dale@farnsworth.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).