From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from moutng.kundenserver.de (moutng.kundenserver.de [212.227.126.174]) by ozlabs.org (Postfix) with ESMTP id 0CB96DE118 for ; Thu, 10 Apr 2008 21:29:34 +1000 (EST) From: Stefan Roese To: linuxppc-dev@ozlabs.org Subject: Re: ppc405ep emac driver loading problem Date: Thu, 10 Apr 2008 13:29:26 +0200 References: <6a6049b80804100337m6ab33fd5wd3cf9524e7f6d721@mail.gmail.com> In-Reply-To: <6a6049b80804100337m6ab33fd5wd3cf9524e7f6d721@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Message-Id: <200804101329.26846.sr@denx.de> Cc: M B List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Thursday 10 April 2008, M B wrote: > I'm porting vanilla 2.6.25-rc8 (arch=powerpc) to a new board. UART is > already working in the kernel and Uboot with UART and ethernet is also > working. > But I can't get the emac driver (ibm_newemac) working under Linux. > On boot emac_init get's called and exits normally, but no probe or > open will get called and no network devices (except lo) are known to > the kernel. > > Do I have to do something more, than adding the mals and emacs to the > device tree? I haven't seen any 40x or 44x board in the platforms > folder doing something special for the emac. > > Any hints? How does your .config look? Please send the EMAC defines only. And send the emac/mal related dts nodes. And the current kernel boot log. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================