From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.dev.rtsoft.ru (unknown [85.21.88.2]) by ozlabs.org (Postfix) with SMTP id B79C8DDF43 for ; Fri, 9 May 2008 00:20:08 +1000 (EST) Date: Thu, 8 May 2008 18:20:05 +0400 From: Anton Vorontsov To: Kumar Gala Subject: [RFC PATCH 0/3] Board-specific PCI fixups [was: Re: [PATCH 2/2] [POWERPC] 86xx: mpc8610_hpcd: add support for ULI RTC] Message-ID: <20080508142005.GA6749@polina.dev.rtsoft.ru> MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Cc: linuxppc-dev@ozlabs.org Reply-To: avorontsov@ru.mvista.com List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Mon, May 05, 2008 at 02:11:30PM -0500, Kumar Gala wrote: > > On May 5, 2008, at 1:56 PM, Anton Vorontsov wrote: > >> The ULI "Super South Bridge" contains ISA bridge to the legacy >> devices, such as Super IO mouse/keyboard/floppy disk controllers, >> parallel port, i8259 interrupt controller and so on. >> >> On the MPC8610HPCD, i8259 seems to be disabled (mpc8610_hpcd.c >> confirms this), and other peripherals are not traced out. >> So we use only RTC. >> >> This patch also adds ULI quirk to make RTC actually work (this >> quirk differs a bit from the one in the fsl_uli1575.c). > > Can we just one quick for both? Probably yes, but fsl_uli1575 needs some other changes for this. This series fully tested on MPC8610HPCD, and build-tested for MPC85xxDS and MPC8641HPCN. -- Anton Vorontsov email: cbouatmailru@gmail.com irc://irc.freenode.net/bd2