From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Kumar Gala <galak@kernel.crashing.org>
Cc: Scott Wood <scottwood@freescale.com>,
linuxppc-dev@ozlabs.org, Timur Tabi <timur@freescale.com>
Subject: [PATCH 4/7] [POWERPC] QE: implement support for the GPIO LIB API
Date: Mon, 19 May 2008 21:47:05 +0400 [thread overview]
Message-ID: <20080519174705.GD28185@polina.dev.rtsoft.ru> (raw)
In-Reply-To: <20080519174558.GA26229@polina.dev.rtsoft.ru>
This is needed to access QE GPIOs via Linux GPIO API.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-By: Timur Tabi <timur@freescale.com>
---
Documentation/powerpc/booting-without-of.txt | 27 +++++
arch/powerpc/sysdev/qe_lib/Kconfig | 9 ++
arch/powerpc/sysdev/qe_lib/Makefile | 1 +
arch/powerpc/sysdev/qe_lib/gpio.c | 146 ++++++++++++++++++++++++++
include/asm-powerpc/qe.h | 3 +
5 files changed, 186 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/sysdev/qe_lib/gpio.c
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index fc7a235..c1044ee 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1738,6 +1738,33 @@ platforms are moved over to use the flattened-device-tree model.
......
};
+ Note that "par_io" nodes are obsolete, and should not be used for
+ the new device trees. Instead, each Par I/O bank should be represented
+ via its own gpio-controller node:
+
+ Required properties:
+ - #gpio-cells : should be "2".
+ - compatible : should be "fsl,<chip>-qe-pario-bank",
+ "fsl,mpc8323-qe-pario-bank".
+ - reg : offset to the register set and its length.
+ - gpio-controller : node to identify gpio controllers.
+
+ Example:
+ qe_pio_a: gpio-controller@1400 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8360-qe-pario-bank",
+ "fsl,mpc8323-qe-pario-bank";
+ reg = <0x1400 0x18>;
+ gpio-controller;
+ };
+
+ qe_pio_e: gpio-controller@1460 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8360-qe-pario-bank",
+ "fsl,mpc8323-qe-pario-bank";
+ reg = <0x1460 0x18>;
+ gpio-controller;
+ };
vi) Pin configuration nodes
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig
index 76ffbc4..4bb18f5 100644
--- a/arch/powerpc/sysdev/qe_lib/Kconfig
+++ b/arch/powerpc/sysdev/qe_lib/Kconfig
@@ -24,3 +24,12 @@ config QE_USB
bool
help
QE USB Host Controller support
+
+config QE_GPIO
+ bool "QE GPIO support"
+ depends on QUICC_ENGINE
+ select GENERIC_GPIO
+ select HAVE_GPIO_LIB
+ help
+ Say Y here if you're going to use hardware that connects to the
+ QE GPIOs.
diff --git a/arch/powerpc/sysdev/qe_lib/Makefile b/arch/powerpc/sysdev/qe_lib/Makefile
index e9ff888..f1855c1 100644
--- a/arch/powerpc/sysdev/qe_lib/Makefile
+++ b/arch/powerpc/sysdev/qe_lib/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_UCC) += ucc.o
obj-$(CONFIG_UCC_SLOW) += ucc_slow.o
obj-$(CONFIG_UCC_FAST) += ucc_fast.o
obj-$(CONFIG_QE_USB) += usb.o
+obj-$(CONFIG_QE_GPIO) += gpio.o
diff --git a/arch/powerpc/sysdev/qe_lib/gpio.c b/arch/powerpc/sysdev/qe_lib/gpio.c
new file mode 100644
index 0000000..c712e24
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/gpio.c
@@ -0,0 +1,146 @@
+/*
+ * QUICC Engine GPIOs
+ *
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <asm/qe.h>
+
+struct qe_gpio_chip {
+ struct of_mm_gpio_chip mm_gc;
+ spinlock_t lock;
+
+ /* shadowed data register to clear/set bits safely */
+ u32 cpdata;
+};
+
+static inline struct qe_gpio_chip *
+to_qe_gpio_chip(struct of_mm_gpio_chip *mm_gc)
+{
+ return container_of(mm_gc, struct qe_gpio_chip, mm_gc);
+}
+
+static void qe_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+ struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+ struct qe_pio_regs __iomem *regs = mm_gc->regs;
+
+ qe_gc->cpdata = in_be32(®s->cpdata);
+}
+
+static int qe_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct qe_pio_regs __iomem *regs = mm_gc->regs;
+ u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio);
+
+ return in_be32(®s->cpdata) & pin_mask;
+}
+
+static void qe_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+ struct qe_pio_regs __iomem *regs = mm_gc->regs;
+ unsigned long flags;
+ u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio);
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ if (val)
+ qe_gc->cpdata |= pin_mask;
+ else
+ qe_gc->cpdata &= ~pin_mask;
+
+ out_be32(®s->cpdata, qe_gc->cpdata);
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+}
+
+static int qe_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ __par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_IN, 0, 0, 0);
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+ return 0;
+}
+
+static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ __par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_OUT, 0, 0, 0);
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+ qe_gpio_set(gc, gpio, val);
+
+ return 0;
+}
+
+void __init qe_add_gpiochips(void)
+{
+ struct device_node *np;
+
+ for_each_compatible_node(np, NULL, "fsl,mpc8323-qe-pario-bank") {
+ int ret;
+ struct qe_gpio_chip *qe_gc;
+ struct of_mm_gpio_chip *mm_gc;
+ struct of_gpio_chip *of_gc;
+ struct gpio_chip *gc;
+
+ qe_gc = kzalloc(sizeof(*qe_gc), GFP_KERNEL);
+ if (!qe_gc) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ spin_lock_init(&qe_gc->lock);
+
+ mm_gc = &qe_gc->mm_gc;
+ of_gc = &mm_gc->of_gc;
+ gc = &of_gc->gc;
+
+ mm_gc->save_regs = qe_gpio_save_regs;
+ of_gc->gpio_cells = 2;
+ gc->ngpio = QE_PIO_PINS;
+ gc->direction_input = qe_gpio_dir_in;
+ gc->direction_output = qe_gpio_dir_out;
+ gc->get = qe_gpio_get;
+ gc->set = qe_gpio_set;
+
+ ret = of_mm_gpiochip_add(np, mm_gc);
+ if (ret)
+ goto err;
+ continue;
+err:
+ pr_err("%s: registration failed with status %d\n",
+ np->full_name, ret);
+ kfree(qe_gc);
+ /* try others anyway */
+ }
+}
diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h
index c4523ac..01e3c70 100644
--- a/include/asm-powerpc/qe.h
+++ b/include/asm-powerpc/qe.h
@@ -100,8 +100,11 @@ struct qe_pio_regs {
#endif
};
+extern void __init qe_add_gpiochips(void);
extern int par_io_init(struct device_node *np);
extern int par_io_of_config(struct device_node *np);
+#define QE_PIO_DIR_IN 2
+#define QE_PIO_DIR_OUT 1
extern void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin,
int dir, int open_drain, int assignment,
int has_irq);
--
1.5.5.1
next prev parent reply other threads:[~2008-05-19 17:47 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-19 17:45 [PATCH 0/7] Patches for Kumar's powerpc-next tree Anton Vorontsov
2008-05-19 17:46 ` [PATCH 1/7] [POWERPC] sysdev: implement FSL GTM support Anton Vorontsov
2008-05-20 6:04 ` Kumar Gala
2008-05-20 12:32 ` Anton Vorontsov
2008-05-20 13:15 ` Kumar Gala
2008-05-20 14:08 ` Anton Vorontsov
2008-05-20 14:20 ` Kumar Gala
2008-05-20 14:32 ` Anton Vorontsov
2008-05-20 14:35 ` Anton Vorontsov
2008-05-20 14:24 ` Grant Likely
2008-05-20 12:41 ` Anton Vorontsov
2008-05-20 13:16 ` Kumar Gala
2008-05-20 14:38 ` Timur Tabi
2008-05-19 17:46 ` [PATCH 2/7] [POWERPC] QE: add support for QE USB clocks routing Anton Vorontsov
2008-05-20 4:04 ` Stephen Rothwell
2008-05-20 12:10 ` Anton Vorontsov
2008-05-19 17:46 ` [PATCH 3/7] [POWERPC] QE: prepare QE PIO code for GPIO LIB support Anton Vorontsov
2008-05-19 17:47 ` Anton Vorontsov [this message]
2008-06-10 16:15 ` [PATCH 4/7] [POWERPC] QE: implement support for the GPIO LIB API Kumar Gala
2008-06-11 12:29 ` Anton Vorontsov
2008-06-11 13:52 ` Kumar Gala
2008-06-11 23:42 ` [PATCH] powerpc/QE: use arch_initcall to probe QUICC Engine GPIOs Anton Vorontsov
2008-06-24 15:05 ` Kumar Gala
2008-05-19 17:47 ` [PATCH 5/7] [POWERPC] 83xx: new board support: MPC8360E-RDK Anton Vorontsov
2008-05-19 17:47 ` [PATCH 6/7] [POWERPC] booting-without-of: add FHCI USB, FSL MCU, FSL UPM and GPIO LEDs bindings Anton Vorontsov
2008-05-19 17:47 ` [PATCH 7/7] [POWERPC] qe_lib: switch to the cpm_muram implementation Anton Vorontsov
-- strict thread matches above, loose matches on Subject: below --
2008-05-23 16:38 [PATCH 0/7] Patches for Kumar's powerpc-next tree Anton Vorontsov
2008-05-23 16:39 ` [PATCH 4/7] [POWERPC] QE: implement support for the GPIO LIB API Anton Vorontsov
2008-05-27 15:04 ` Kumar Gala
2008-05-27 15:16 ` Anton Vorontsov
2008-05-30 13:03 ` Anton Vorontsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080519174705.GD28185@polina.dev.rtsoft.ru \
--to=avorontsov@ru.mvista.com \
--cc=galak@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=scottwood@freescale.com \
--cc=timur@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).