From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from metis.extern.pengutronix.de (metis.extern.pengutronix.de [83.236.181.26]) by ozlabs.org (Postfix) with ESMTP id DC36FDDFE7 for ; Thu, 22 May 2008 00:33:50 +1000 (EST) Date: Wed, 21 May 2008 16:33:07 +0200 From: Wolfram Sang To: Jochen Friedrich Subject: Re: [PATCH] i2c: adds support for i2c bus on Freescale CPM1/CPM2 controllers Message-ID: <20080521143307.GD4271@pengutronix.de> References: <4833FCCA.4080707@scram.de> MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="XvKFcGCOAo53UbWW" In-Reply-To: <4833FCCA.4080707@scram.de> Cc: linuxppc-dev list , "Kernel, Linux" , Scott Wood , Linux I2C , Jean Delvare , Andrew Morton , Boris Shteinbock List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , --XvKFcGCOAo53UbWW Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi Jochen, On Wed, May 21, 2008 at 12:43:22PM +0200, Jochen Friedrich wrote: > This driver uses the port of 2.4 code from Vitaly Bordug > and the actual algorithm used by the i2c > driver of the DBox code on cvs.tuxboc.org from Felix Domke > (tmbinc@gmx.net) and Gillem (htoa@gmx.net) converted to an > of_platform_driver. Tested on CPM1 (MPC823 on dbox2 hardware) and > CPM2 (MPC8272). >=20 > Signed-off-by: Jochen Friedrich > --- Works on MPC8260. Tested-by: Wolfram Sang > drivers/i2c/busses/Kconfig | 10 + > drivers/i2c/busses/Makefile | 1 + > drivers/i2c/busses/i2c-cpm.c | 745 ++++++++++++++++++++++++++++++++++++= ++++++ > 3 files changed, 756 insertions(+), 0 deletions(-) > create mode 100644 drivers/i2c/busses/i2c-cpm.c >=20 > Changes since last version: > - fixed copy and paste bug (I2COM_MASTER -> I2COM_START) > - changed dev_err() to dev_dbg() for NACK > - changed dev_dbg() to dev_err() for Timeout > - added explanation for brg formular Typo: formula > - added "bus-frequency" OF attribute to be able to override i2c clock \o/ Cool feature. Worked nicely. > - support for numbered adapter (it was already documented in > my booting-without-of patch but not yet implemented) > - finally changed i2c "pseudo address" 0xfe to 0x7f << 1 > - get rid of the "fsl,cpm-i2c" name. This logic was screwed > - fixed the error patch for request_irq failure path instead of patch? But well, I assume typos in this section do not matter much anyhow as they are not imported into git. Am I right, Jean? > - s/IIC/I2C/g > - fixed error output "read timeout" -> "transfer timeout" >=20 > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig > index 48438cc..c627b94 100644 > --- a/drivers/i2c/busses/Kconfig > +++ b/drivers/i2c/busses/Kconfig > @@ -117,6 +117,16 @@ config I2C_BLACKFIN_TWI_CLK_KHZ > help > The unit of the TWI clock is kHz. >=20 > +config I2C_CPM > + tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)" > + depends on (CPM1 || CPM2) && OF_I2C > + help > + This supports the use of the I2C interface on Freescale > + processors with CPM1 or CPM2. > + > + This driver can also be built as a module. If so, the module > + will be called i2c-cpm. > + > config I2C_DAVINCI > tristate "DaVinci I2C driver" > depends on ARCH_DAVINCI > diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile > index e8c882a..1ccd5ba 100644 > --- a/drivers/i2c/busses/Makefile > +++ b/drivers/i2c/busses/Makefile > @@ -11,6 +11,7 @@ obj-$(CONFIG_I2C_AMD8111) +=3D i2c-amd8111.o > obj-$(CONFIG_I2C_AT91) +=3D i2c-at91.o > obj-$(CONFIG_I2C_AU1550) +=3D i2c-au1550.o > obj-$(CONFIG_I2C_BLACKFIN_TWI) +=3D i2c-bfin-twi.o > +obj-$(CONFIG_I2C_CPM) +=3D i2c-cpm.o > obj-$(CONFIG_I2C_DAVINCI) +=3D i2c-davinci.o > obj-$(CONFIG_I2C_ELEKTOR) +=3D i2c-elektor.o > obj-$(CONFIG_I2C_GPIO) +=3D i2c-gpio.o > diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c > new file mode 100644 > index 0000000..305159c > --- /dev/null > +++ b/drivers/i2c/busses/i2c-cpm.c > @@ -0,0 +1,745 @@ > +/* > + * Freescale CPM1/CPM2 I2C interface. > + * Copyright (c) 1999 Dan Malek (dmalek@jlc.net). > + * > + * moved into proper i2c interface; > + * Brad Parker (brad@heeltoe.com) > + * > + * Parts from dbox2_i2c.c (cvs.tuxbox.org) > + * (C) 2000-2001 Felix Domke (tmbinc@gmx.net), Gillem (htoa@gmx.net) > + * > + * (C) 2007 Montavista Software, Inc. > + * Vitaly Bordug > + * > + * Converted to of_platform_device. Renamed to i2c-cpm.c. > + * (C) 2007,2008 Jochen Friedrich > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +/* Try to define this if you have an older CPU (earlier than rev D4) */ > +/* However, better use a GPIO based bitbang driver in this case :/ */ > +#undef I2C_CHIP_ERRATA > + > +#define CPM_MAX_READ 513 > +#define CPM_MAXBD 4 > + > +#define I2C_EB (0x10) /* Big endian mode */ > +#define I2C_EB_CPM2 (0x30) /* Big endian mode, memory snoop */ > + > +#define DPRAM_BASE ((u8 __iomem __force *)cpm_muram_addr(0)) > + > +/* I2C parameter RAM. */ > +struct i2c_ram { > + ushort rbase; /* Rx Buffer descriptor base address */ > + ushort tbase; /* Tx Buffer descriptor base address */ > + u_char rfcr; /* Rx function code */ > + u_char tfcr; /* Tx function code */ > + ushort mrblr; /* Max receive buffer length */ > + uint rstate; /* Internal */ > + uint rdp; /* Internal */ > + ushort rbptr; /* Rx Buffer descriptor pointer */ > + ushort rbc; /* Internal */ > + uint rxtmp; /* Internal */ > + uint tstate; /* Internal */ > + uint tdp; /* Internal */ > + ushort tbptr; /* Tx Buffer descriptor pointer */ > + ushort tbc; /* Internal */ > + uint txtmp; /* Internal */ > + char res1[4]; /* Reserved */ > + ushort rpbase; /* Relocation pointer */ > + char res2[2]; /* Reserved */ > +}; > + > +#define I2COM_START 0x80 > +#define I2COM_MASTER 0x01 > +#define I2CER_TXE 0x10 > +#define I2CER_BUSY 0x04 > +#define I2CER_TXB 0x02 > +#define I2CER_RXB 0x01 > +#define I2MOD_EN 0x01 > + > +/* I2C Registers */ > +struct i2c_reg { > + u8 i2mod; > + u8 res1[3]; > + u8 i2add; > + u8 res2[3]; > + u8 i2brg; > + u8 res3[3]; > + u8 i2com; > + u8 res4[3]; > + u8 i2cer; > + u8 res5[3]; > + u8 i2cmr; > +}; > + > +struct cpm_i2c { > + char *base; > + struct of_device *ofdev; > + struct i2c_adapter adap; > + uint dp_addr; > + int version; /* CPM1=3D1, CPM2=3D2 */ > + int irq; > + int cp_command; > + int freq; > + struct i2c_reg __iomem *i2c_reg; > + struct i2c_ram __iomem *i2c_ram; > + u16 i2c_addr; > + wait_queue_head_t i2c_wait; > + cbd_t __iomem *tbase; > + cbd_t __iomem *rbase; > + u_char *txbuf[CPM_MAXBD]; > + u_char *rxbuf[CPM_MAXBD]; > + u32 txdma[CPM_MAXBD]; > + u32 rxdma[CPM_MAXBD]; > +}; > + > +static irqreturn_t cpm_i2c_interrupt(int irq, void *dev_id) > +{ > + struct cpm_i2c *cpm; > + struct i2c_reg __iomem *i2c_reg; > + struct i2c_adapter *adap =3D dev_id; > + int i; > + > + cpm =3D i2c_get_adapdata(dev_id); > + i2c_reg =3D cpm->i2c_reg; > + > + /* Clear interrupt. */ > + i =3D in_8(&i2c_reg->i2cer); > + out_8(&i2c_reg->i2cer, i); > + > + dev_dbg(&adap->dev, "Interrupt: %x\n", i); > + > + wake_up_interruptible(&cpm->i2c_wait); > + > + return i ? IRQ_HANDLED : IRQ_NONE; > +} > + > +static void cpm_reset_i2c_params(struct cpm_i2c *cpm) > +{ > + struct i2c_ram __iomem *i2c_ram =3D cpm->i2c_ram; > + > + /* Set up the I2C parameters in the parameter ram. */ > + out_be16(&i2c_ram->tbase, (u8 __iomem *)cpm->tbase - DPRAM_BASE); > + out_be16(&i2c_ram->rbase, (u8 __iomem *)cpm->rbase - DPRAM_BASE); > + > + if (cpm->version =3D=3D 1) { > + out_8(&i2c_ram->tfcr, I2C_EB); > + out_8(&i2c_ram->rfcr, I2C_EB); > + } else { > + out_8(&i2c_ram->tfcr, I2C_EB_CPM2); > + out_8(&i2c_ram->rfcr, I2C_EB_CPM2); > + } > + > + out_be16(&i2c_ram->mrblr, CPM_MAX_READ); > + > + out_be32(&i2c_ram->rstate, 0); > + out_be32(&i2c_ram->rdp, 0); > + out_be16(&i2c_ram->rbptr, 0); > + out_be16(&i2c_ram->rbc, 0); > + out_be32(&i2c_ram->rxtmp, 0); > + out_be32(&i2c_ram->tstate, 0); > + out_be32(&i2c_ram->tdp, 0); > + out_be16(&i2c_ram->tbptr, 0); > + out_be16(&i2c_ram->tbc, 0); > + out_be32(&i2c_ram->txtmp, 0); > +} > + > +static void cpm_i2c_force_close(struct i2c_adapter *adap) > +{ > + struct cpm_i2c *cpm =3D i2c_get_adapdata(adap); > + struct i2c_reg __iomem *i2c_reg =3D cpm->i2c_reg; > + > + dev_dbg(&adap->dev, "cpm_i2c_force_close()\n"); > + > + cpm_command(cpm->cp_command, CPM_CR_CLOSE_RX_BD); > + > + out_8(&i2c_reg->i2cmr, 0x00); /* Disable all interrupts */ > + out_8(&i2c_reg->i2cer, 0xff); > +} > + > +static void cpm_i2c_parse_message(struct i2c_adapter *adap, > + struct i2c_msg *pmsg, int num, int tx, int rx) > +{ > + cbd_t __iomem *tbdf; > + cbd_t __iomem *rbdf; > + u_char addr; > + u_char *tb; > + u_char *rb; > + struct cpm_i2c *cpm =3D i2c_get_adapdata(adap); > + > + tbdf =3D cpm->tbase + tx; > + rbdf =3D cpm->rbase + rx; > + > + addr =3D pmsg->addr << 1; > + if (pmsg->flags & I2C_M_RD) > + addr |=3D 1; > + > + tb =3D cpm->txbuf[tx]; > + rb =3D cpm->rxbuf[rx]; > + > + /* Align read buffer */ > + rb =3D (u_char *) (((ulong) rb + 1) & ~1); > + > + tb[0] =3D addr; /* Device address byte w/rw flag */ > + > + out_be16(&tbdf->cbd_datlen, pmsg->len + 1); > + out_be16(&tbdf->cbd_sc, 0); > + > + if (!(pmsg->flags & I2C_M_NOSTART)) > + setbits16(&tbdf->cbd_sc, BD_I2C_START); > + > + if (tx + 1 =3D=3D num) > + setbits16(&tbdf->cbd_sc, BD_SC_LAST | BD_SC_WRAP); > + > + if (pmsg->flags & I2C_M_RD) { > + /* > + * To read, we need an empty buffer of the proper length. > + * All that is used is the first byte for address, the remainder > + * is just used for timing (and doesn't really have to exist). > + */ > + > + dev_dbg(&adap->dev, "cpm_i2c_read(abyte=3D0x%x)\n", addr); > + > + out_be16(&rbdf->cbd_datlen, 0); > + out_be16(&rbdf->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT); > + > + if (rx + 1 =3D=3D CPM_MAXBD) > + setbits16(&rbdf->cbd_sc, BD_SC_WRAP); > + > + eieio(); > + setbits16(&tbdf->cbd_sc, BD_SC_READY); > + } else { > + dev_dbg(&adap->dev, "cpm_iic_write(abyte=3D0x%x)\n", addr); > + > + memcpy(tb+1, pmsg->buf, pmsg->len); > + > + eieio(); > + setbits16(&tbdf->cbd_sc, BD_SC_READY | BD_SC_INTRPT); > + } > +} > + > +static int cpm_i2c_check_message(struct i2c_adapter *adap, > + struct i2c_msg *pmsg, int tx, int rx) > +{ > + cbd_t __iomem *tbdf; > + cbd_t __iomem *rbdf; > + u_char *tb; > + u_char *rb; > + struct cpm_i2c *cpm =3D i2c_get_adapdata(adap); > + > + tbdf =3D cpm->tbase + tx; > + rbdf =3D cpm->rbase + rx; > + > + tb =3D cpm->txbuf[tx]; > + rb =3D cpm->rxbuf[rx]; > + > + /* Align read buffer */ > + rb =3D (u_char *) (((uint) rb + 1) & ~1); > + > + eieio(); > + if (pmsg->flags & I2C_M_RD) { > + dev_dbg(&adap->dev, "tx sc 0x%04x, rx sc 0x%04x\n", > + in_be16(&tbdf->cbd_sc), in_be16(&rbdf->cbd_sc)); > + > + if (in_be16(&tbdf->cbd_sc) & BD_SC_NAK) { > + dev_dbg(&adap->dev, "I2C read; No ack\n"); > + return -ENXIO; > + } > + if (in_be16(&rbdf->cbd_sc) & BD_SC_EMPTY) { > + dev_err(&adap->dev, > + "I2C read; complete but rbuf empty\n"); > + return -EREMOTEIO; > + } > + if (in_be16(&rbdf->cbd_sc) & BD_SC_OV) { > + dev_err(&adap->dev, "I2C read; Overrun\n"); > + return -EREMOTEIO; > + } > + memcpy(pmsg->buf, rb, pmsg->len); > + } else { > + dev_dbg(&adap->dev, "tx sc %d 0x%04x\n", tx, > + in_be16(&tbdf->cbd_sc)); > + > + if (in_be16(&tbdf->cbd_sc) & BD_SC_NAK) { > + dev_dbg(&adap->dev, "I2C write; No ack\n"); > + return -ENXIO; > + } > + if (in_be16(&tbdf->cbd_sc) & BD_SC_UN) { > + dev_err(&adap->dev, "I2C write; Underrun\n"); > + return -EIO; > + } > + if (in_be16(&tbdf->cbd_sc) & BD_SC_CL) { > + dev_err(&adap->dev, "I2C write; Collision\n"); > + return -EIO; > + } > + } > + return 0; > +} > + > +static int cpm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, = int num) > +{ > + struct cpm_i2c *cpm =3D i2c_get_adapdata(adap); > + struct i2c_reg __iomem *i2c_reg =3D cpm->i2c_reg; > + struct i2c_ram __iomem *i2c_ram =3D cpm->i2c_ram; > + struct i2c_msg *pmsg; > + int ret, i; > + int tptr; > + int rptr; > + cbd_t __iomem *tbdf; > + cbd_t __iomem *rbdf; > + > + if (num > CPM_MAXBD) > + return -EINVAL; > + > + /* Check if we have any oversized READ requests */ > + for (i =3D 0; i < num; i++) { > + pmsg =3D &msgs[i]; > + if (pmsg->len >=3D CPM_MAX_READ) > + return -EINVAL; > + } > + > + /* Reset to use first buffer */ > + out_be16(&i2c_ram->rbptr, in_be16(&i2c_ram->rbase)); > + out_be16(&i2c_ram->tbptr, in_be16(&i2c_ram->tbase)); > + > + tbdf =3D cpm->tbase; > + rbdf =3D cpm->rbase; > + > + tptr =3D 0; > + rptr =3D 0; > + > + while (tptr < num) { > + pmsg =3D &msgs[tptr]; > + dev_dbg(&adap->dev, "R: %d T: %d\n", rptr, tptr); > + > + cpm_i2c_parse_message(adap, pmsg, num, tptr, rptr); > + if (pmsg->flags & I2C_M_RD) > + rptr++; > + tptr++; > + } > + /* Start transfer now */ > + /* Enable RX/TX/Error interupts */ > + out_8(&i2c_reg->i2cmr, I2CER_BUSY | I2CER_TXB | I2CER_RXB); > + out_8(&i2c_reg->i2cer, 0xff); /* Clear interrupt status */ > + /* Chip bug, set enable here */ > + setbits8(&i2c_reg->i2mod, I2MOD_EN); /* Enable */ > + /* Begin transmission */ > + setbits8(&i2c_reg->i2com, I2COM_START); > + > + tptr =3D 0; > + rptr =3D 0; > + > + while (tptr < num) { > + /* Check for outstanding messages */ > + dev_dbg(&adap->dev, "test ready.\n"); > + pmsg =3D &msgs[tptr]; > + if (pmsg->flags & I2C_M_RD) > + ret =3D wait_event_interruptible_timeout(cpm->i2c_wait, > + !(in_be16(&rbdf[rptr].cbd_sc) & BD_SC_EMPTY), > + 1 * HZ); > + else > + ret =3D wait_event_interruptible_timeout(cpm->i2c_wait, > + !(in_be16(&tbdf[tptr].cbd_sc) & BD_SC_READY), > + 1 * HZ); > + if (ret =3D=3D 0) { > + ret =3D -EREMOTEIO; > + dev_err(&adap->dev, "I2C transfer: timeout\n"); > + goto out_err; > + } > + if (ret > 0) { > + dev_dbg(&adap->dev, "ready.\n"); > + ret =3D cpm_i2c_check_message(adap, pmsg, tptr, rptr); > + tptr++; > + if (pmsg->flags & I2C_M_RD) > + rptr++; > + if (ret) > + goto out_err; > + } > + } > +#ifdef I2C_CHIP_ERRATA > + /* > + * Chip errata, clear enable. This is not needed on rev D4 CPUs. > + * Disabling I2C too early may cause too short stop condition > + */ > + udelay(4); > + clrbits8(&i2c_reg->i2mod, I2MOD_EN); > +#endif > + return (num); > + > +out_err: > + cpm_i2c_force_close(adap); > +#ifdef I2C_CHIP_ERRATA > + /* > + * Chip errata, clear enable. This is not needed on rev D4 CPUs. > + */ > + clrbits8(&i2c_reg->i2mod, I2MOD_EN); > +#endif > + return ret; > +} > + > +static u32 cpm_i2c_func(struct i2c_adapter *adap) > +{ > + return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK); > +} > + > +/* -----exported algorithm data: ------------------------------------- */ > + > +static const struct i2c_algorithm cpm_i2c_algo =3D { > + .master_xfer =3D cpm_i2c_xfer, > + .functionality =3D cpm_i2c_func, > +}; > + > +static const struct i2c_adapter cpm_ops =3D { > + .owner =3D THIS_MODULE, > + .name =3D "i2c-cpm", > + .algo =3D &cpm_i2c_algo, > + .class =3D I2C_CLASS_HWMON, > +}; > + > +static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm) > +{ > + struct of_device *ofdev =3D cpm->ofdev; > + const u32 *data; > + int len, ret, i; > + void __iomem *i2c_base; > + cbd_t __iomem *tbdf; > + cbd_t __iomem *rbdf; > + unsigned char brg; > + > + dev_dbg(&cpm->ofdev->dev, "cpm_i2c_setup()\n"); > + > + init_waitqueue_head(&cpm->i2c_wait); > + > + cpm->irq =3D of_irq_to_resource(ofdev->node, 0, NULL); > + if (cpm->irq =3D=3D NO_IRQ) > + return -EINVAL; > + > + /* Install interrupt handler. */ > + ret =3D request_irq(cpm->irq, cpm_i2c_interrupt, 0, "cpm_i2c", > + &cpm->adap); > + if (ret) > + return ret; > + > + /* I2C parameter RAM */ > + i2c_base =3D of_iomap(ofdev->node, 1); > + if (i2c_base =3D=3D NULL) { > + ret =3D -EINVAL; > + goto out_irq; > + } > + > + if (of_device_is_compatible(ofdev->node, "fsl,cpm1-i2c")) { > + > + /* Check for and use a microcode relocation patch. */ > + cpm->i2c_ram =3D i2c_base; > + cpm->i2c_addr =3D in_be16(&cpm->i2c_ram->rpbase); > + > + /* > + * Maybe should use cpm_muram_alloc instead of hardcoding > + * this in micropatch.c > + */ > + if (cpm->i2c_addr) { > + cpm->i2c_ram =3D cpm_muram_addr(cpm->i2c_addr); > + iounmap(i2c_base); > + } > + > + cpm->version =3D 1; > + > + } else if (of_device_is_compatible(ofdev->node, "fsl,cpm2-i2c")) { > + cpm->i2c_addr =3D cpm_muram_alloc(sizeof(struct i2c_ram), 64); > + cpm->i2c_ram =3D cpm_muram_addr(cpm->i2c_addr); > + out_be16(i2c_base, cpm->i2c_addr); > + iounmap(i2c_base); > + > + cpm->version =3D 2; > + > + } else { > + iounmap(i2c_base); > + ret =3D -EINVAL; > + goto out_irq; > + } > + > + /* I2C control/status registers */ > + cpm->i2c_reg =3D of_iomap(ofdev->node, 0); > + if (cpm->i2c_reg =3D=3D NULL) { > + ret =3D -EINVAL; > + goto out_ram; > + } > + > + data =3D of_get_property(ofdev->node, "fsl,cpm-command", &len); > + if (!data || len !=3D 4) { > + ret =3D -EINVAL; > + goto out_reg; > + } > + cpm->cp_command =3D *data; > + > + data =3D of_get_property(ofdev->node, "linux,i2c-class", &len); > + if (data && len =3D=3D 4) > + cpm->adap.class =3D *data; > + > + data =3D of_get_property(ofdev->node, "bus-frequency", &len); > + if (data && len =3D=3D 4) > + cpm->freq =3D *data; > + else > + cpm->freq =3D 60000; /* use 60kHz i2c bus frequency by default */ > + > + /* > + * Allocate space for CPM_MAXBD transmit and receive buffer > + * descriptors in the DP ram. > + */ > + cpm->dp_addr =3D cpm_muram_alloc(sizeof(cbd_t) * 2 * CPM_MAXBD, 8); > + if (!cpm->dp_addr) { > + ret =3D -ENOMEM; > + goto out_reg; > + } > + > + cpm->tbase =3D cpm_muram_addr(cpm->dp_addr); > + cpm->rbase =3D cpm_muram_addr(cpm->dp_addr + sizeof(cbd_t) * CPM_MAXBD); > + > + /* Allocate TX and RX buffers */ > + > + tbdf =3D cpm->tbase; > + rbdf =3D cpm->rbase; > + > + for (i =3D 0; i < CPM_MAXBD; i++) { > + cpm->rxbuf[i] =3D dma_alloc_coherent( > + NULL, CPM_MAX_READ + 1, &cpm->rxdma[i], GFP_KERNEL); > + if (!cpm->rxbuf[i]) { > + ret =3D -ENOMEM; > + goto out_muram; > + } > + out_be32(&rbdf[i].cbd_bufaddr, ((cpm->rxdma[i] + 1) & ~1)); > + > + cpm->txbuf[i] =3D (unsigned char *)dma_alloc_coherent( > + NULL, CPM_MAX_READ + 1, &cpm->txdma[i], GFP_KERNEL); > + if (!cpm->txbuf[i]) { > + ret =3D -ENOMEM; > + goto out_muram; > + } > + out_be32(&tbdf[i].cbd_bufaddr, cpm->txdma[i]); > + } > + > + /* Initialize Tx/Rx parameters. */ > + > + cpm_reset_i2c_params(cpm); > + > + dev_dbg(&cpm->ofdev->dev, "i2c_ram %p, i2c_addr 0x%04x\n", > + cpm->i2c_ram, cpm->i2c_addr); Maybe add the i2c-bus-frequency here? > + dev_dbg(&cpm->ofdev->dev, "tbase 0x%04x, rbase 0x%04x\n", > + (u8 __iomem *)cpm->tbase - DPRAM_BASE, > + (u8 __iomem *)cpm->rbase - DPRAM_BASE); > + > + cpm_command(cpm->cp_command, CPM_CR_INIT_TRX); > + > + /* > + * Select an invalid address. Just make sure we don't use loopback mode > + */ > + out_8(&cpm->i2c_reg->i2add, 0x7f << 1); > + > + /* > + * PDIV is set to 00 in i2mod, so brgclk/32 is used as input to the > + * i2c baud rate generator. This is devided by 2 x (DIV + 3) to get Typo. "divided" > + * the actual i2c bus frequency. > + */ That explanation is good and useful, me thinks. > + brg =3D get_brgfreq() / (32 * 2 * cpm->freq) - 3; > + out_8(&cpm->i2c_reg->i2brg, brg); > + > + out_8(&cpm->i2c_reg->i2mod, 0x00); > + out_8(&cpm->i2c_reg->i2com, I2COM_MASTER); /* Master mode */ > + > + /* Disable interrupts. */ > + out_8(&cpm->i2c_reg->i2cmr, 0); > + out_8(&cpm->i2c_reg->i2cer, 0xff); > + > + return 0; > + > +out_muram: > + for (i =3D 0; i < CPM_MAXBD; i++) { > + if (cpm->rxbuf[i]) > + dma_free_coherent(NULL, CPM_MAX_READ + 1, > + cpm->rxbuf[i], cpm->rxdma[i]); > + if (cpm->txbuf[i]) > + dma_free_coherent(NULL, CPM_MAX_READ + 1, > + cpm->txbuf[i], cpm->txdma[i]); > + } > + cpm_muram_free(cpm->dp_addr); > +out_reg: > + iounmap(cpm->i2c_reg); > +out_ram: > + if ((cpm->version =3D=3D 1) && (!cpm->i2c_addr)) > + iounmap(cpm->i2c_ram); > + if (cpm->version =3D=3D 2) > + cpm_muram_free(cpm->i2c_addr); > +out_irq: > + free_irq(cpm->irq, &cpm->adap); > + return ret; > +} > + > +static void cpm_i2c_shutdown(struct cpm_i2c *cpm) > +{ > + int i; > + > + /* Shut down I2C. */ > + clrbits8(&cpm->i2c_reg->i2mod, I2MOD_EN); > + > + /* Disable interrupts */ > + out_8(&cpm->i2c_reg->i2cmr, 0); > + out_8(&cpm->i2c_reg->i2cer, 0xff); > + > + free_irq(cpm->irq, &cpm->adap); > + > + /* Free all memory */ > + for (i =3D 0; i < CPM_MAXBD; i++) { > + dma_free_coherent(NULL, CPM_MAX_READ + 1, > + cpm->rxbuf[i], cpm->rxdma[i]); > + dma_free_coherent(NULL, CPM_MAX_READ + 1, > + cpm->txbuf[i], cpm->txdma[i]); > + } > + > + cpm_muram_free(cpm->dp_addr); > + iounmap(cpm->i2c_reg); > + > + if ((cpm->version =3D=3D 1) && (!cpm->i2c_addr)) > + iounmap(cpm->i2c_ram); > + if (cpm->version =3D=3D 2) > + cpm_muram_free(cpm->i2c_addr); > +} > + > +static int __devinit cpm_i2c_probe(struct of_device *ofdev, > + const struct of_device_id *match) > +{ > + int result, len; > + struct cpm_i2c *cpm; > + const u32 *data; > + > + cpm =3D kzalloc(sizeof(struct cpm_i2c), GFP_KERNEL); > + if (!cpm) > + return -ENOMEM; > + > + cpm->ofdev =3D ofdev; > + > + dev_set_drvdata(&ofdev->dev, cpm); > + > + cpm->adap =3D cpm_ops; > + i2c_set_adapdata(&cpm->adap, cpm); > + cpm->adap.dev.parent =3D &ofdev->dev; > + > + result =3D cpm_i2c_setup(cpm); > + if (result) { > + dev_err(&ofdev->dev, "Unable to init hardware\n"); > + goto out_free; > + } > + > + /* register new adapter to i2c module... */ > + > + data =3D of_get_property(ofdev->node, "linux,i2c-index", &len); > + if (data && len =3D=3D 4) { > + cpm->adap.nr =3D *data; > + result =3D i2c_add_numbered_adapter(&cpm->adap); > + } else > + result =3D i2c_add_adapter(&cpm->adap); > + > + if (result < 0) { > + dev_err(&ofdev->dev, "Unable to register with I2C\n"); > + goto out_shut; > + } > + > + dev_dbg(&ofdev->dev, "hw routines for %s registered.\n", > + cpm->adap.name); > + > + /* > + * register OF I2C devices > + */ > + of_register_i2c_devices(&cpm->adap, ofdev->node); > + > + return 0; > +out_shut: > + cpm_i2c_shutdown(cpm); > +out_free: > + dev_set_drvdata(&ofdev->dev, NULL); > + kfree(cpm); > + > + return result; > +} > + > +static int __devexit cpm_i2c_remove(struct of_device *ofdev) > +{ > + struct cpm_i2c *cpm =3D dev_get_drvdata(&ofdev->dev); > + > + i2c_del_adapter(&cpm->adap); > + > + cpm_i2c_shutdown(cpm); > + > + dev_set_drvdata(&ofdev->dev, NULL); > + kfree(cpm); > + > + return 0; > +} > + > +static const struct of_device_id cpm_i2c_match[] =3D { > + { > + .compatible =3D "fsl,cpm1-i2c", > + }, > + { > + .compatible =3D "fsl,cpm2-i2c", > + }, > + {}, > +}; > + > +MODULE_DEVICE_TABLE(of, cpm_i2c_match); > + > +static struct of_platform_driver cpm_i2c_driver =3D { > + .match_table =3D cpm_i2c_match, > + .probe =3D cpm_i2c_probe, > + .remove =3D __devexit_p(cpm_i2c_remove), > + .driver =3D { > + .name =3D "fsl-i2c-cpm", > + .owner =3D THIS_MODULE, > + } > +}; > + > +static int __init cpm_i2c_init(void) > +{ > + return of_register_platform_driver(&cpm_i2c_driver); > +} > + > +static void __exit cpm_i2c_exit(void) > +{ > + of_unregister_platform_driver(&cpm_i2c_driver); > +} > + > +module_init(cpm_i2c_init); > +module_exit(cpm_i2c_exit); > + > +MODULE_AUTHOR("Jochen Friedrich "); > +MODULE_DESCRIPTION("I2C-Bus adapter routines for CPM boards"); > +MODULE_LICENSE("GPL"); > --=20 > 1.5.5.1 >=20 All the best, Wolfram --=20 Dipl.-Ing. Wolfram Sang | http://www.pengutronix.de Pengutronix - Linux Solutions for Science and Industry --XvKFcGCOAo53UbWW Content-Type: application/pgp-signature; name="signature.asc" Content-Description: Digital signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iD8DBQFINDKjD27XaX1/VRsRAqjCAKCWR81tsNmPQqQg7L3iP0GMmkxsdgCdEkni 3V54I8fgGWBUQxD2qDmrJTs= =ZcsF -----END PGP SIGNATURE----- --XvKFcGCOAo53UbWW--