Re: Comments on device tree for pcm030

[Juergen Beisert <jbe@pengutronix.de>]

Jon,

hmm, I tried the same, but with a 32MiB flash instead. And Linux-2.6.26-rc5=
=20
and the dtc-1.1.0.

On Monday 09 June 2008 23:30, Jon Smirl wrote:
> This is my boot log:
>
> ff000000.flash: Found 1 x16 devices at 0x0 in 16-bit bank
>  Intel/Sharp Extended Query Table at 0x0031
> Using buffer write method
> cfi_cmdset_0001: Erase suspend on write enabled
> RedBoot partition parsing not available
> Creating 6 MTD partitions on "ff000000.flash":
> 0x00000000-0x00040000 : "ubootl"
> 0x00040000-0x00200000 : "kernel"
> 0x00200000-0x00f00000 : "jffs2"
> 0x00f00000-0x00f40000 : "uboot"
> 0x00f40000-0x00f80000 : "oftree"
> 0x00f80000-0x01000000 : "space"


Here is mine (with DEBUG on in physmap_of.c):

[...]
mpc52xx MII bus: probed
net eth0: Using PHY at MDIO address 0
of-flash fe000000.flash: of_flash device: fe000000-fdffffff
of-flash: probe of fe000000.flash failed with error -16
TCP cubic registered
[...]

I'm confused about the "fe00000-fdffffff". These are the return values from=
=20
the of_address_to_resource() call (in of_flash_probe() ). It should=20
be "fe00000-ffffffff" instead.

Regards,
Juergen

=2D-=20
Dipl.-Ing. Juergen Beisert | http://www.pengutronix.de
=A0Pengutronix - Linux Solutions for Science and Industry
=A0   Handelsregister: Amtsgericht Hildesheim, HRA 2686
=A0 =A0 =A0    Vertretung Sued/Muenchen, Germany
   Phone: +49-8766-939 228 |  Fax: +49-5121-206917-9