u-boot for ML403

u-boot for ML403

[Anand Kumar S]

[-- Attachment #1: Type: text/plain, Size: 1865 bytes --]


Hi,

 

I am new to virtex 4 platform and i am trying to bringup u-boot on ML403
board. I download u-boot.zip ftrom ML410 site and am trying to compile
it for

ML403 using the following command

 

make ml403_config

make

 

and i am getting the following error.

 

 ../xilinx_iic/iic_adapter.c: In function 'receive':

.../xilinx_iic/iic_adapter.c:91: error: 'XIIC_STOP' undeclared (first use
in this function)

.../xilinx_iic/iic_adapter.c:91: error: too many arguments to function
'XIic_Send'

.../xilinx_iic/iic_adapter.c:96: error: too many arguments to function
'XIic_Recv'

make[1]: *** [../xilinx_iic/iic_adapter.o] Error 1

 

Am i missing some files or patch here? Does someone have a ready made
code for u-boot on ML403? If so can you

please share it with me.  

 

 

Thanks & Rgds

 

Anand

 



DISCLAIMER:
-----------------------------------------------------------------------------------------------------------------------

The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in 
this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates.
Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of 
this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have
received this email in error please delete it and notify the sender immediately. Before opening any mail and 
attachments please check them for viruses and defect.

-----------------------------------------------------------------------------------------------------------------------

[-- Attachment #2: Type: text/html, Size: 7016 bytes --]

Re: u-boot for ML403

[Wolfgang Denk]

In message <66E8AEE9980BB44CA5FCAD39EBA56AC6049EC842@CHN-HCLT-EVS02.HCLT.CORP.HCL.IN> you wrote:
> 
> I am new to virtex 4 platform and i am trying to bringup u-boot on ML403

You are off topic on this list. Please post U-Boot related questions o
the U-Boot mailing list.

But - be warned:

> DISCLAIMER:

Such  disclaimers  are  taken  seriously  there,  and  incidents   of
unauthorized disclosure will be reported to your management.


> Content-Type: text/html;
> 	charset="us-ascii"
> Content-Transfer-Encoding: quoted-printable

Also note that HTML is strictly forbidden on the U-Boot mailing list.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
panic: kernel trap (ignored)