From: Robert Jennings <rcj@linux.vnet.ibm.com>
To: paulus@samba.org, benh@kernel.crashing.org,
linuxppc-dev@ozlabs.org, linux-scsi@vger.kernel.org,
Brian King <brking@linux.vnet.ibm.com>,
Nathan Fontenot <nfont@austin.ibm.com>,
David Darrington <ddarring@linux.vnet.ibm.com>
Subject: Re: [PATCH 15/16 v3] [v2] ibmvscsi: driver enablement for CMO
Date: Tue, 8 Jul 2008 15:35:54 -0500 [thread overview]
Message-ID: <20080708203553.GA20206@linux.vnet.ibm.com> (raw)
In-Reply-To: <20080704125631.GR1310@linux.vnet.ibm.com>
=46rom: Robert Jennings <rcj@linux.vnet.ibm.com>
I removed references to 'entitlement' after having changed the function
'get_io_entitlement' to 'get_desired_dma' to correctly indicate what the
function was doing. Also, this function does not need to page align the
return value, the VIO bus is responsible for this.
(We would like to take this patch through linuxppc-dev with the full
change set for this feature. We are copying linux-scsi for review and ack)
Enable the driver to function in a Cooperative Memory Overcommitment (CMO)
environment.
The following changes are made to enable the driver for CMO:
* DMA mapping errors will not result in error messages if entitlement has
been exceeded and resources were not available.
* The driver has a get_desired_dma function defined to function
in a CMO environment. It will indicate how much IO memory it would like
to function.
Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
---
drivers/scsi/ibmvscsi/ibmvscsi.c | 45 +++++++++++++++++++++++++++++++++-=
-----
drivers/scsi/ibmvscsi/ibmvscsi.h | 2 ++
2 files changed, 40 insertions(+), 7 deletions(-)
Index: b/drivers/scsi/ibmvscsi/ibmvscsi.c
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -72,6 +72,7 @@
#include <linux/delay.h>
#include <asm/firmware.h>
#include <asm/vio.h>
+#include <asm/firmware.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_host.h>
@@ -426,8 +427,10 @@ static int map_sg_data(struct scsi_cmnd=20
SG_ALL * sizeof(struct srp_direct_buf),
&evt_struct->ext_list_token, 0);
if (!evt_struct->ext_list) {
- sdev_printk(KERN_ERR, cmd->device,
- "Can't allocate memory for indirect table\n");
+ if (!firmware_has_feature(FW_FEATURE_CMO))
+ sdev_printk(KERN_ERR, cmd->device,
+ "Can't allocate memory "
+ "for indirect table\n");
return 0;
}
}
@@ -743,7 +746,9 @@ static int ibmvscsi_queuecommand(struct=20
srp_cmd->lun =3D ((u64) lun) << 48;
=20
if (!map_data_for_srp_cmd(cmnd, evt_struct, srp_cmd, hostdata->dev)) {
- sdev_printk(KERN_ERR, cmnd->device, "couldn't convert cmd to srp_cmd\n");
+ if (!firmware_has_feature(FW_FEATURE_CMO))
+ sdev_printk(KERN_ERR, cmnd->device,
+ "couldn't convert cmd to srp_cmd\n");
free_event_struct(&hostdata->pool, evt_struct);
return SCSI_MLQUEUE_HOST_BUSY;
}
@@ -855,7 +860,10 @@ static void send_mad_adapter_info(struct
DMA_BIDIRECTIONAL);
=20
if (dma_mapping_error(req->buffer)) {
- dev_err(hostdata->dev, "Unable to map request_buffer for adapter_info!\n=
");
+ if (!firmware_has_feature(FW_FEATURE_CMO))
+ dev_err(hostdata->dev,
+ "Unable to map request_buffer for "
+ "adapter_info!\n");
free_event_struct(&hostdata->pool, evt_struct);
return;
}
@@ -1400,7 +1408,9 @@ static int ibmvscsi_do_host_config(struc
DMA_BIDIRECTIONAL);
=20
if (dma_mapping_error(host_config->buffer)) {
- dev_err(hostdata->dev, "dma_mapping error getting host config\n");
+ if (!firmware_has_feature(FW_FEATURE_CMO))
+ dev_err(hostdata->dev,
+ "dma_mapping error getting host config\n");
free_event_struct(&hostdata->pool, evt_struct);
return -1;
}
@@ -1604,7 +1614,7 @@ static struct scsi_host_template driver_
.eh_host_reset_handler =3D ibmvscsi_eh_host_reset_handler,
.slave_configure =3D ibmvscsi_slave_configure,
.change_queue_depth =3D ibmvscsi_change_queue_depth,
- .cmd_per_lun =3D 16,
+ .cmd_per_lun =3D IBMVSCSI_CMDS_PER_LUN_DEFAULT,
.can_queue =3D IBMVSCSI_MAX_REQUESTS_DEFAULT,
.this_id =3D -1,
.sg_tablesize =3D SG_ALL,
@@ -1613,6 +1623,26 @@ static struct scsi_host_template driver_
};
=20
/**
+ * ibmvscsi_get_desired_dma - Calculate IO memory desired by the driver
+ *
+ * @vdev: struct vio_dev for the device whose desired IO mem is to be retu=
rned
+ *
+ * Return value:
+ * Number of bytes of IO data the driver will need to perform well.
+ */
+static unsigned long ibmvscsi_get_desired_dma(struct vio_dev *vdev)
+{
+ /* iu_storage data allocated in initialize_event_pool */
+ unsigned long desired_io =3D max_requests * sizeof(union viosrp_iu);
+
+ /* add io space for sg data */
+ desired_io +=3D (IBMVSCSI_MAX_SECTORS_DEFAULT *
+ IBMVSCSI_CMDS_PER_LUN_DEFAULT);
+
+ return desired_io;
+}
+
+/**
* Called by bus code for each adapter
*/
static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id=
*id)
@@ -1641,7 +1671,7 @@ static int ibmvscsi_probe(struct vio_dev
hostdata->host =3D host;
hostdata->dev =3D dev;
atomic_set(&hostdata->request_limit, -1);
- hostdata->host->max_sectors =3D 32 * 8; /* default max I/O 32 pages */
+ hostdata->host->max_sectors =3D IBMVSCSI_MAX_SECTORS_DEFAULT;
=20
rc =3D ibmvscsi_ops->init_crq_queue(&hostdata->queue, hostdata, max_reque=
sts);
if (rc !=3D 0 && rc !=3D H_RESOURCE) {
@@ -1735,6 +1765,7 @@ static struct vio_driver ibmvscsi_driver
.id_table =3D ibmvscsi_device_table,
.probe =3D ibmvscsi_probe,
.remove =3D ibmvscsi_remove,
+ .get_desired_dma =3D ibmvscsi_get_desired_dma,
.driver =3D {
.name =3D "ibmvscsi",
.owner =3D THIS_MODULE,
Index: b/drivers/scsi/ibmvscsi/ibmvscsi.h
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
--- a/drivers/scsi/ibmvscsi/ibmvscsi.h
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.h
@@ -45,6 +45,8 @@ struct Scsi_Host;
#define MAX_INDIRECT_BUFS 10
=20
#define IBMVSCSI_MAX_REQUESTS_DEFAULT 100
+#define IBMVSCSI_CMDS_PER_LUN_DEFAULT 16
+#define IBMVSCSI_MAX_SECTORS_DEFAULT 256 /* 32 * 8 =3D default max I/O 32 =
pages */
#define IBMVSCSI_MAX_CMDS_PER_LUN 64
=20
/* ------------------------------------------------------------
next prev parent reply other threads:[~2008-07-08 20:36 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-04 12:44 [PATCH 00/16 v3] powerpc: pSeries Cooperative Memory Overcommitment support Robert Jennings
2008-07-04 12:51 ` [PATCH 01/16 v3] powerpc: Remove extraneous error reporting for hcall failures in lparcfg Robert Jennings
2008-07-22 3:34 ` Paul Mackerras
2008-07-04 12:51 ` [PATCH 02/16 v3] powerpc: Split processor entitlement retrieval and gathering to helper routines Robert Jennings
2008-07-22 18:53 ` Nathan Fontenot
2008-07-04 12:51 ` [PATCH 03/16 v3] powerpc: Add memory entitlement capabilities to /proc/ppc64/lparcfg Robert Jennings
2008-07-22 18:55 ` Nathan Fontenot
2008-07-04 12:52 ` [PATCH 04/16 v3] powerpc: Split retrieval of processor entitlement data into a helper routine Robert Jennings
2008-07-22 5:54 ` Paul Mackerras
2008-07-22 18:49 ` Nathan Fontenot
2008-07-22 18:56 ` Nathan Fontenot
2008-07-04 12:52 ` [PATCH 05/16 v3] powerpc: Enable CMO feature during platform setup Robert Jennings
2008-07-04 12:52 ` Robert Jennings
2008-07-04 12:52 ` [PATCH 06/16 v3] powerpc: Utilities to set firmware page state Robert Jennings
2008-07-04 12:53 ` Robert Jennings
2008-07-04 12:53 ` [PATCH 07/16 v3] powerpc: Add collaborative memory manager Robert Jennings
2008-07-22 4:53 ` Paul Mackerras
2008-07-04 12:54 ` [PATCH 08/16 v3] powerpc: Do not probe PCI buses or eBus devices if CMO is enabled Robert Jennings
2008-07-14 21:35 ` Brian King
2008-07-04 12:54 ` [PATCH 09/16 v3] powerpc: Add CMO paging statistics Robert Jennings
2008-07-04 12:54 ` [PATCH 10/16 v3] powerpc: iommu enablement for CMO Robert Jennings
2008-07-05 17:51 ` Olof Johansson
2008-07-08 20:48 ` [PATCH 10/16 v3] [v2] " Robert Jennings
2008-07-22 5:04 ` Paul Mackerras
2008-07-22 13:30 ` Robert Jennings
2008-07-22 4:57 ` [PATCH 10/16 v3] " Paul Mackerras
2008-07-22 13:28 ` Robert Jennings
2008-07-04 12:55 ` [PATCH 11/16 v3] powerpc: vio bus support " Robert Jennings
2008-07-04 12:55 ` [PATCH 12/16 v3] powerpc: Verify CMO memory entitlement updates with virtual I/O Robert Jennings
2008-07-04 12:55 ` [PATCH 13/16 v3] ibmveth: Automatically enable larger rx buffer pools for larger mtu Robert Jennings
2008-07-04 12:56 ` [PATCH 14/16 v3] ibmveth: enable driver for CMO Robert Jennings
2008-07-08 20:38 ` [PATCH 14/16 v3] [v2] " Robert Jennings
2008-07-04 12:56 ` [PATCH 15/16 v3] ibmvscsi: driver enablement " Robert Jennings
2008-07-07 14:34 ` Brian King
2008-07-08 17:41 ` Robert Jennings
2008-07-08 20:35 ` Robert Jennings [this message]
2008-07-10 13:43 ` [PATCH 15/16 v3] [v2] " Brian King
2008-07-04 12:57 ` [PATCH 16/16 v3] powerpc: Update arch vector to indicate support " Robert Jennings
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080708203553.GA20206@linux.vnet.ibm.com \
--to=rcj@linux.vnet.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=brking@linux.vnet.ibm.com \
--cc=ddarring@linux.vnet.ibm.com \
--cc=linux-scsi@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=nfont@austin.ibm.com \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).