From: Grant Likely <grant.likely@secretlab.ca>
To: Jon Smirl <jonsmirl@gmail.com>
Cc: linuxppc-dev@ozlabs.org, alsa-devel@alsa-project.org
Subject: Re: [PATCH 1/2] Support internal I2S clock sources on MPC5200
Date: Sat, 26 Jul 2008 20:05:36 -0600 [thread overview]
Message-ID: <20080727020536.GL12191@secretlab.ca> (raw)
In-Reply-To: <20080722235349.11648.90112.stgit@terra>
On Tue, Jul 22, 2008 at 07:53:49PM -0400, Jon Smirl wrote:
> Support internal I2S clock sources on MPC5200
>
> Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
I'll play with this when I get home. In the mean time I've got some
comments below. Overall, it looks right to me.
g.
> ---
>
> sound/soc/fsl/mpc5200_psc_i2s.c | 58 ++++++++++++++++++++++++++++++++++-----
> sound/soc/fsl/mpc5200_psc_i2s.h | 13 +++++++++
> 2 files changed, 64 insertions(+), 7 deletions(-)
> create mode 100644 sound/soc/fsl/mpc5200_psc_i2s.h
>
> diff --git a/sound/soc/fsl/mpc5200_psc_i2s.c b/sound/soc/fsl/mpc5200_psc_i2s.c
> index 8692329..f028f61 100644
> --- a/sound/soc/fsl/mpc5200_psc_i2s.c
> +++ b/sound/soc/fsl/mpc5200_psc_i2s.c
> @@ -23,8 +23,12 @@
>
> #include <sysdev/bestcomm/bestcomm.h>
> #include <sysdev/bestcomm/gen_bd.h>
> +#include <asm/time.h>
> +#include <asm/mpc52xx.h>
> #include <asm/mpc52xx_psc.h>
>
> +#include "mpc5200_psc_i2s.h"
> +
> MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
> MODULE_DESCRIPTION("Freescale MPC5200 PSC in I2S mode ASoC Driver");
> MODULE_LICENSE("GPL");
> @@ -93,6 +97,7 @@ struct psc_i2s {
> struct snd_soc_dai dai;
> spinlock_t lock;
> u32 sicr;
> + uint sysclk;
>
> /* per-stream data */
> struct psc_i2s_stream playback;
> @@ -224,6 +229,7 @@ static int psc_i2s_hw_params(struct snd_pcm_substream *substream,
> {
> struct snd_soc_pcm_runtime *rtd = substream->private_data;
> struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data;
> + uint bits, framesync, bitclk, value;
> u32 mode;
>
> dev_dbg(psc_i2s->dev, "%s(substream=%p) p_size=%i p_bytes=%i"
> @@ -235,15 +241,19 @@ static int psc_i2s_hw_params(struct snd_pcm_substream *substream,
> switch (params_format(params)) {
> case SNDRV_PCM_FORMAT_S8:
> mode = MPC52xx_PSC_SICR_SIM_CODEC_8;
> + bits = 8;
> break;
> case SNDRV_PCM_FORMAT_S16_BE:
> mode = MPC52xx_PSC_SICR_SIM_CODEC_16;
> + bits = 16;
> break;
> case SNDRV_PCM_FORMAT_S24_BE:
> mode = MPC52xx_PSC_SICR_SIM_CODEC_24;
> + bits = 24;
> break;
> case SNDRV_PCM_FORMAT_S32_BE:
> mode = MPC52xx_PSC_SICR_SIM_CODEC_32;
> + bits = 32;
> break;
> default:
> dev_dbg(psc_i2s->dev, "invalid format\n");
> @@ -251,7 +261,24 @@ static int psc_i2s_hw_params(struct snd_pcm_substream *substream,
> }
> out_be32(&psc_i2s->psc_regs->sicr, psc_i2s->sicr | mode);
>
> - snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
> + if (psc_i2s->sysclk) {
> + framesync = bits * 2;
> + bitclk = (psc_i2s->sysclk) / (params_rate(params) * framesync);
> +
> + /* bitclk field is byte swapped due to mpc5200/b compatibility */
> + value = ((framesync - 1) << 24) |
> + (((bitclk - 1) & 0xFF) << 16) | ((bitclk - 1) & 0xFF00);
> +
> + dev_dbg(psc_i2s->dev, "%s(substream=%p) rate=%i sysclk=%i"
> + " framesync=%i bitclk=%i reg=%X\n",
> + __FUNCTION__, substream, params_rate(params), psc_i2s->sysclk,
> + framesync, bitclk, value);
> +
> + out_be32(&psc_i2s->psc_regs->ccr, value);
> + out_8(&psc_i2s->psc_regs->ctur, bits - 1);
> + }
This should probably only be executed if the psc is the clock master;
just like you've done in psc_i2s_set_sysclk()
> +
> + snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
>
> return 0;
> }
> @@ -429,9 +456,29 @@ static int psc_i2s_set_sysclk(struct snd_soc_dai *cpu_dai,
> int clk_id, unsigned int freq, int dir)
> {
> struct psc_i2s *psc_i2s = cpu_dai->private_data;
> - dev_dbg(psc_i2s->dev, "psc_i2s_set_sysclk(cpu_dai=%p, dir=%i)\n",
> - cpu_dai, dir);
> - return (dir == SND_SOC_CLOCK_IN) ? 0 : -EINVAL;
> + int clkdiv, err;
> + dev_dbg(psc_i2s->dev, "psc_i2s_set_sysclk(cpu_dai=%p, freq=%u, dir=%i)\n",
> + cpu_dai, freq, dir);
> + if (dir == SND_SOC_CLOCK_OUT) {
> + psc_i2s->sysclk = freq;
> + if (clk_id == MPC52xx_CLK_CELLSLAVE) {
> + psc_i2s->sicr |= MPC52xx_PSC_SICR_CELLSLAVE | MPC52xx_PSC_SICR_GENCLK;
> + } else { /* MPC52xx_CLK_INTERNAL */
> + psc_i2s->sicr &= ~MPC52xx_PSC_SICR_CELLSLAVE;
> + psc_i2s->sicr |= MPC52xx_PSC_SICR_GENCLK;
> +
> + clkdiv = ppc_proc_freq / freq;
> + err = ppc_proc_freq % freq;
> + if (err > freq / 2)
> + clkdiv++;
> +
> + dev_dbg(psc_i2s->dev, "psc_i2s_set_sysclk(clkdiv %d freq error=%ldHz)\n",
> + clkdiv, (ppc_proc_freq / clkdiv - freq));
> +
> + return mpc52xx_set_psc_clkdiv(psc_i2s->dai.id + 1, clkdiv);
> + }
> + }
> + return 0;
> }
>
> /**
> @@ -784,9 +831,6 @@ static int __devinit psc_i2s_of_probe(struct of_device *op,
> /* Configure the serial interface mode; defaulting to CODEC8 mode */
> psc_i2s->sicr = MPC52xx_PSC_SICR_DTS1 | MPC52xx_PSC_SICR_I2S |
> MPC52xx_PSC_SICR_CLKPOL;
> - if (of_get_property(op->node, "fsl,cellslave", NULL))
> - psc_i2s->sicr |= MPC52xx_PSC_SICR_CELLSLAVE |
> - MPC52xx_PSC_SICR_GENCLK;
> out_be32(&psc_i2s->psc_regs->sicr,
> psc_i2s->sicr | MPC52xx_PSC_SICR_SIM_CODEC_8);
>
> diff --git a/sound/soc/fsl/mpc5200_psc_i2s.h b/sound/soc/fsl/mpc5200_psc_i2s.h
> new file mode 100644
> index 0000000..0e0a84e
> --- /dev/null
> +++ b/sound/soc/fsl/mpc5200_psc_i2s.h
> @@ -0,0 +1,13 @@
> +/*
> + * Freescale MPC5200 PSC in I2S mode
> + * ALSA SoC Digital Audio Interface (DAI) driver
> + *
> + */
> +
> +#ifndef __SOUND_SOC_FSL_MPC52xx_PSC_I2S_H__
> +#define __SOUND_SOC_FSL_MPC52xx_PSC_I2S_H__
> +
> +#define MPC52xx_CLK_INTERNAL 0
> +#define MPC52xx_CLK_CELLSLAVE 1
> +
> +#endif /* __SOUND_SOC_FSL_MPC52xx_PSC_I2S_H__ */
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
next prev parent reply other threads:[~2008-07-27 4:04 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-22 23:53 [PATCH 1/2] Support internal I2S clock sources on MPC5200 Jon Smirl
2008-07-22 23:53 ` [PATCH 2/2] Allow a custom ASOC machine driver with soc-of-simple Jon Smirl
2008-07-23 5:30 ` Stephen Rothwell
2008-07-23 10:53 ` [alsa-devel] " Mark Brown
2008-07-23 14:09 ` Jon Smirl
2008-07-23 15:14 ` Mark Brown
2008-07-23 15:16 ` Jon Smirl
2008-07-23 15:36 ` Mark Brown
2008-07-27 1:14 ` Grant Likely
2008-07-24 6:20 ` filling dummy struct snd_dma_buffer dinesh
2008-07-27 1:12 ` [PATCH 2/2] Allow a custom ASOC machine driver with soc-of-simple Grant Likely
2008-07-27 4:44 ` Jon Smirl
2008-07-27 5:29 ` Grant Likely
2008-07-27 14:07 ` Jon Smirl
2008-07-23 10:36 ` [alsa-devel] [PATCH 1/2] Support internal I2S clock sources on MPC5200 Mark Brown
2008-07-27 2:05 ` Grant Likely [this message]
2008-07-27 4:48 ` Jon Smirl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080727020536.GL12191@secretlab.ca \
--to=grant.likely@secretlab.ca \
--cc=alsa-devel@alsa-project.org \
--cc=jonsmirl@gmail.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).