Re: Strange behavior with I2C on Sequoia board

[Stefan Roese <sr@denx.de>]

On Thursday 21 August 2008, Valentine Barshak wrote:
> > It seems that your bootwrapper is somehow not copying the correct MAC
> > address to the device-tree. Not sure what's going wrong here. We usually
> > don't use the bootwrapper but boot the uImage directly from U-Boot on all
> > 4xx systems.
> >
> > You might want to debug the bootwrapper code, if possible drop the
> > bootwrapper and use the uImage with a newer, device-tree enabled U-Boot
> > version.
>
> U-boot thinks that all memory above the first 8MB is out of reach for
> the kernel and puts kernel bootargs and boardinfo structure below 8MB as
> close as possible to this limit. Including the i2c driver into the
> kernel increases the kernel image size. So when u-boot unpacks the
> kernel to 0x400000 (Load Address: 00400000) it overwrites the kernel
> parameters. So when the kernel actually starts, it reads zeros instead
> of boardinfo (and mac addresses)
>
> The 8MB limit is set for all AMCC boards in include/configs/amcc-common.h:
> #define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
>
> I think this limit is obsolete and can be moved to at least 64MB.
> But you'll need to rebuild u-boot.
>
> Stefan, what do you think? Can we increase the default initial memory
> map for AMCC boards in the next u-boot release, since u-boot has all
> memory identity-mapped on ppc 44x?

Yes, it was our intention to increase the default map to a higher value a few 
weeks ago. I just forgot to really do it. I'll do this shortly.

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office@denx.de
=====================================================================