[PATCH v2 0/2] powerpc: Board support for GE Fanuc SBC610

[Martyn Welch <martyn.welch@gefanuc.com>]

The following series implements basic board support for GE Fanuc's SBC610, a 
6U single board computer, based on Freescale's MPC8641D.

This series provides basic functionality:
- The board can boot with a serial console.
- Ethernet works, though the phys are polled.
- The PCI bus is scanned and sata functions.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
---

Kumar, Jon & Scott: Thank you for your comments, I hope this revision resolves
the issues you highlighted.

Martyn

Martyn Welch (2):
      powerpc: Default configuration for GE Fanuc SBC610
      powerpc: Board support for GE Fanuc SBC610


 arch/powerpc/boot/dts/gef_sbc610.dts      |  268 +++++
 arch/powerpc/configs/gef_sbc610_defconfig | 1654 +++++++++++++++++++++++++++++
 arch/powerpc/platforms/86xx/Kconfig       |    9 
 arch/powerpc/platforms/86xx/Makefile      |    1 
 arch/powerpc/platforms/86xx/gef_sbc610.c  |  187 +++
 5 files changed, 2118 insertions(+), 1 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/gef_sbc610.dts
 create mode 100644 arch/powerpc/configs/gef_sbc610_defconfig
 create mode 100644 arch/powerpc/platforms/86xx/gef_sbc610.c