From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Date: Mon, 25 Aug 2008 19:36:17 +1000 From: David Gibson To: Scott Wood Subject: Re: boot cuImage on an old u-boot Message-ID: <20080825093617.GA1619@yookeroo.seuss> References: <20080820150958.GA23294@Chamillionaire.breakpoint.cc> <20080821161505.GA15669@ld0162-tx32.am.freescale.net> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <20080821161505.GA15669@ld0162-tx32.am.freescale.net> Cc: linuxppc-dev@ozlabs.org, Sebastian Siewior List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Thu, Aug 21, 2008 at 11:15:05AM -0500, Scott Wood wrote: > On Wed, Aug 20, 2008 at 05:09:58PM +0200, Sebastian Siewior wrote: > > I have here a mpc8540ads board and a u-boot 1.0.0. I've build the > > defconfig for the board and I tried to boot the genarated > > cuImage.mpc8540ads image. After the bootm command I see just > > > > |8540> bootm 1000000 > > |## Booting image at 01000000 ... > > | Image Name: Linux-2.6.26 > > | Image Type: PowerPC Linux Kernel Image (gzip compressed) > > | Data Size: 1232711 Bytes = 1.2 MB > > | Load Address: 00400000 > > | Entry Point: 004005ac > > | Verifying Checksum ... OK > > | Uncompressing Kernel Image ... OK > > | > > > > I don't see the device tree fixups printfs, so crash happend quite > > early. Anyone an idea what I could have done wrong? > > Make sure the device tree contains /chosen/linux,stdout-path. No paths to properties, remember! Make sure the device tree contains a linux,stdout-path property in /chosen. -- David Gibson | I'll have my music baroque, and my code david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_ | _way_ _around_! http://www.ozlabs.org/~dgibson