* boot cuImage on an old u-boot
@ 2008-08-20 15:09 Sebastian Siewior
2008-08-21 16:15 ` Scott Wood
0 siblings, 1 reply; 4+ messages in thread
From: Sebastian Siewior @ 2008-08-20 15:09 UTC (permalink / raw)
To: linuxppc-dev
I have here a mpc8540ads board and a u-boot 1.0.0. I've build the
defconfig for the board and I tried to boot the genarated
cuImage.mpc8540ads image. After the bootm command I see just
|8540> bootm 1000000
|## Booting image at 01000000 ...
| Image Name: Linux-2.6.26
| Image Type: PowerPC Linux Kernel Image (gzip compressed)
| Data Size: 1232711 Bytes = 1.2 MB
| Load Address: 00400000
| Entry Point: 004005ac
| Verifying Checksum ... OK
| Uncompressing Kernel Image ... OK
|
I don't see the device tree fixups printfs, so crash happend quite
early. Anyone an idea what I could have done wrong?
Sebastian
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: boot cuImage on an old u-boot
2008-08-20 15:09 boot cuImage on an old u-boot Sebastian Siewior
@ 2008-08-21 16:15 ` Scott Wood
2008-08-25 9:36 ` David Gibson
0 siblings, 1 reply; 4+ messages in thread
From: Scott Wood @ 2008-08-21 16:15 UTC (permalink / raw)
To: Sebastian Siewior; +Cc: linuxppc-dev
On Wed, Aug 20, 2008 at 05:09:58PM +0200, Sebastian Siewior wrote:
> I have here a mpc8540ads board and a u-boot 1.0.0. I've build the
> defconfig for the board and I tried to boot the genarated
> cuImage.mpc8540ads image. After the bootm command I see just
>
> |8540> bootm 1000000
> |## Booting image at 01000000 ...
> | Image Name: Linux-2.6.26
> | Image Type: PowerPC Linux Kernel Image (gzip compressed)
> | Data Size: 1232711 Bytes = 1.2 MB
> | Load Address: 00400000
> | Entry Point: 004005ac
> | Verifying Checksum ... OK
> | Uncompressing Kernel Image ... OK
> |
>
> I don't see the device tree fixups printfs, so crash happend quite
> early. Anyone an idea what I could have done wrong?
Make sure the device tree contains /chosen/linux,stdout-path.
-Scott
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: boot cuImage on an old u-boot
2008-08-21 16:15 ` Scott Wood
@ 2008-08-25 9:36 ` David Gibson
2008-09-12 15:31 ` Sebastian Siewior
0 siblings, 1 reply; 4+ messages in thread
From: David Gibson @ 2008-08-25 9:36 UTC (permalink / raw)
To: Scott Wood; +Cc: linuxppc-dev, Sebastian Siewior
On Thu, Aug 21, 2008 at 11:15:05AM -0500, Scott Wood wrote:
> On Wed, Aug 20, 2008 at 05:09:58PM +0200, Sebastian Siewior wrote:
> > I have here a mpc8540ads board and a u-boot 1.0.0. I've build the
> > defconfig for the board and I tried to boot the genarated
> > cuImage.mpc8540ads image. After the bootm command I see just
> >
> > |8540> bootm 1000000
> > |## Booting image at 01000000 ...
> > | Image Name: Linux-2.6.26
> > | Image Type: PowerPC Linux Kernel Image (gzip compressed)
> > | Data Size: 1232711 Bytes = 1.2 MB
> > | Load Address: 00400000
> > | Entry Point: 004005ac
> > | Verifying Checksum ... OK
> > | Uncompressing Kernel Image ... OK
> > |
> >
> > I don't see the device tree fixups printfs, so crash happend quite
> > early. Anyone an idea what I could have done wrong?
>
> Make sure the device tree contains /chosen/linux,stdout-path.
No paths to properties, remember!
Make sure the device tree contains a linux,stdout-path property in
/chosen.
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2008-09-12 15:31 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-08-20 15:09 boot cuImage on an old u-boot Sebastian Siewior
2008-08-21 16:15 ` Scott Wood
2008-08-25 9:36 ` David Gibson
2008-09-12 15:31 ` Sebastian Siewior
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).