* GPIO interrupt on AMCC 460EX @ 2008-08-28 14:11 Felix Radensky 2008-08-28 15:20 ` Stefan Roese 0 siblings, 1 reply; 11+ messages in thread From: Felix Radensky @ 2008-08-28 14:11 UTC (permalink / raw) To: linuxppc-embedded, Stefan Roese Hi, I'm writing a Linux driver for CPLD access on custom 460EX based board. CPLD generates interrupt, which is connected to GPIO pin 45. According to 460EX user manual, this pin, if configured as alternate function 3, will generate external interrupt 12, which is mapped into irq 20 on UIC3. My question is - how do I get irq number suitable for passing to request_irq(). Thanks a lot. Felix Radensky Embedded Solutions Ltd. http://www.embedded-sol.com ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: GPIO interrupt on AMCC 460EX 2008-08-28 14:11 GPIO interrupt on AMCC 460EX Felix Radensky @ 2008-08-28 15:20 ` Stefan Roese 2008-08-28 21:47 ` Felix Radensky 0 siblings, 1 reply; 11+ messages in thread From: Stefan Roese @ 2008-08-28 15:20 UTC (permalink / raw) To: Felix Radensky; +Cc: linuxppc-embedded Felix, On Thursday 28 August 2008, Felix Radensky wrote: > I'm writing a Linux driver for CPLD access on custom > 460EX based board. CPLD generates interrupt, which > is connected to GPIO pin 45. According to 460EX user > manual, this pin, if configured as alternate function 3, > will generate external interrupt 12, which is mapped into > irq 20 on UIC3. My question is - how do I get irq number > suitable for passing to request_irq(). arch/powerpc now used virtual interrupts. You need to include this hardware interrupt number into your device-tree (create a new node for your CPLD) and extract the virtual irq number from there by calling irq_of_parse_and_map(). Best regards, Stefan ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: GPIO interrupt on AMCC 460EX 2008-08-28 15:20 ` Stefan Roese @ 2008-08-28 21:47 ` Felix Radensky 2008-08-29 15:31 ` MPC8568MDS RAMDISK Problem SETTE AGOSTINO - technolabs 0 siblings, 1 reply; 11+ messages in thread From: Felix Radensky @ 2008-08-28 21:47 UTC (permalink / raw) To: Stefan Roese; +Cc: linuxppc-embedded Hi, Stefan Stefan Roese wrote: > arch/powerpc now used virtual interrupts. You need to include this hardware > interrupt number into your device-tree (create a new node for your CPLD) and > extract the virtual irq number from there by calling irq_of_parse_and_map(). > > That works fine, thank you. Felix. ^ permalink raw reply [flat|nested] 11+ messages in thread
* MPC8568MDS RAMDISK Problem 2008-08-28 21:47 ` Felix Radensky @ 2008-08-29 15:31 ` SETTE AGOSTINO - technolabs 2008-08-29 18:03 ` Bhupender Saharan 2008-08-29 21:45 ` Anatolij Gustschin 0 siblings, 2 replies; 11+ messages in thread From: SETTE AGOSTINO - technolabs @ 2008-08-29 15:31 UTC (permalink / raw) To: linuxppc-embedded Hi all, I am trying to port a RAMDISK Filesystem on the MPC8568MDS board but I have the following problem: U-Boot 1.3.0-rc3 (Nov 23 2007 - 18:17:06) CPU: 8568_E, Version: 1.1, (0x807d0011) Core: E500, Version: 2.2, (0x80210022) Clock Configuration: CPU:1320 MHz, CCB: 528 MHz, DDR: 264 MHz, LBC: 132 MHz L1: D-cache 32 kB enabled I-cache 32 kB enabled Board: 8568 MDS I2C: ready DRAM: Initializing SDRAM: 64 MB DDR: 512 MB FLASH: 32 MB L2 cache 512KB: enabled PCI: 32 bit, 66 MHz, async, host, arbiter Scanning PCI bus 00 PCI on bus 00 - 00 PCIE connected to slot as Root Complex (base address e000a000) PCIE on bus 01 - 01 In: serial Out: serial Err: serial Net: UEC: PHY is Marvell 88E11x1 (1410cc2) UEC: PHY is Marvell 88E11x1 (1410cc2) eTSEC0, eTSEC1, FSL UEC0, FSL UEC1 Hit any key to stop autoboot: 0 ## Checking Image at 02000100 ... Image Name: Linux-2.6.25.5 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1325906 Bytes =3D 1.3 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Booting image at 02000100 ... Image Name: Linux-2.6.25.5 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1325906 Bytes =3D 1.3 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Loading RAMDisk Image at 02200100 ... Image Name: initrd Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 3658144 Bytes =3D 3.5 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Booting using the fdt at 0x21f0100 Loading Ramdisk to 00482000, end 007ff1a0 ... OK Loading Device Tree to 007fa000, end 007fcfff ... OK Using MPC85xx MDS machine description Memory CAM mapping: CAM0=3D16Mb, CAM1=3D16Mb, CAM2=3D16Mb residual: 15Mb Linux version 2.6.25.5 (ity10223@aqlbl05x) (gcc version 4.2.2) #1 Fri Aug 29 16:44:02 CEST 2008 Found legacy serial port 0 for /soc8568@e0000000/serial@4500 mem=3De0004500, taddr=3De0004500, irq=3D0, clk=3D528000000, speed=3D0 Found legacy serial port 1 for /soc8568@e0000000/serial@4600 mem=3De0004600, taddr=3De0004600, irq=3D0, clk=3D528000000, speed=3D0 console [udbg0] enabled Entering add_active_range(0, 0, 12288) 0 entries of 256 used setup_arch: bootmem mpc85xx_mds_setup_arch() Found FSL PCI host bridge at 0x00000000e0008000. Firmware bus number: 0->0 PCI host bridge /soc8568@e0000000/pci@8000 (primary) ranges: Found FSL PCI host bridge at 0x00000000e000a000. Firmware bus number: 0->0 PCI host bridge /soc8568@e0000000/pcie@a000 ranges: arch: exit Top of RAM: 0x3000000, Total RAM: 0x3000000 Memory hole size: 0MB Zone PFN ranges: DMA 0 -> 12288 Normal 12288 -> 12288 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 12288 On node 0 totalpages: 12288 DMA zone: 96 pages used for memmap DMA zone: 0 pages reserved DMA zone: 12192 pages, LIFO batch:1 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Built 1 zonelists in Zone order, mobility grouping on. Total pages: 12192 Kernel command line: mtdparts=3Dphysmap-flash.0:1M(boot),7M(aps0),7M(aps1),1M(optusr) console=3DttyS0,115200 root=3D/dev/ram ramdisk_size=3D500000 rw = ip=3D192.168.0.1 26:192.168.0.33:192.168.1.1:255.255.255.0:MPC8568MDS:eth0:off panic=3D1 mem=3D0x3f00000 aps=3D0 mpic: Setting up MPIC " OpenPIC " version 1.2 at e0040000, max 1 CPUs mpic: ISU size: 80, shift: 7, mask: 7f mpic: Initializing for 80 sources PID hash table entries: 256 (order: 8, 1024 bytes) time_init: decrementer frequency =3D 66.000000 MHz time_init: processor frequency =3D 1320.000000 MHz clocksource: timebase mult[3c9b26d] shift[22] registered clockevent: decrementer mult[10e5] shift[16] cpu[0] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 42240k/49152k available (2632k kernel code, 6892k reserved, 104k data, 96k bss, 128k init) SLUB: Genslabs=3D12, HWalign=3D32, Order=3D0-1, MinObjects=3D4, = CPUs=3D1, Nodes=3D1 Calibrating delay loop... 131.58 BogoMIPS (lpj=3D263168) Mount-cache hash table entries: 512 net_namespace: 152 bytes NET: Registered protocol family 16 PCI: Probing PCI hardware Memory resource not set for host bridge 0 PCI: 0001:01:00.0: class b20 doesn't match header type 01. Ignoring class. Memory resource not set for host bridge 1 PCI: Closing bogus Apple Firmware region 1 on bus 0x02 PCI: Closing bogus Apple Firmware region 2 on bus 0x02 PCI: Bridge: 0001:01:00.0 IO window: 0000-ffffffff MEM window: 0x00000000-0xffffffff PREFETCH window: disabled. PCI: Enabling device 0001:01:00.0 (0106 -> 0107) Registering qe_ic with sysfs... SCSI subsystem initialized NET: Registered protocol family 2 Switched to high resolution mode on CPU 0 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250.0: ttyS0 at MMIO 0xe0004500 (irq =3D 42) is a 16550A console handover: boot [udbg0] -> real [ttyS0] serial8250.0: ttyS1 at MMIO 0xe0004600 (irq =3D 42) is a 16550A brd: module loaded loop: module loaded Gianfar MII Bus: probed eth0: Gianfar Ethernet Controller Version 1.2, 00:e0:0c:00:00:fd eth0: Running with NAPI enabled eth0: 256/256 RX/TX BD ring size eth1: Gianfar Ethernet Controller Version 1.2, 00:e0:0c:00:01:fd eth1: Running with NAPI enabled eth1: 256/256 RX/TX BD ring size i2c /dev entries driver rtc-ds1374 0-0068: rtc core: registered rtc-ds1374 as rtc0 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. rtc-ds1374 0-0068: setting system clock to 1970-07-19 01:19:19 UTC (17198359) IP-Config: Gateway not on directly connected network. List of all partitions: 0100 500000 ram0 (driver?) 0101 500000 ram1 (driver?) 0102 500000 ram2 (driver?) 0103 500000 ram3 (driver?) 0104 500000 ram4 (driver?) 0105 500000 ram5 (driver?) 0106 500000 ram6 (driver?) 0107 500000 ram7 (driver?) 0108 500000 ram8 (driver?) 0109 500000 ram9 (driver?) 010a 500000 ram10 (driver?) 010b 500000 ram11 (driver?) 010c 500000 ram12 (driver?) 010d 500000 ram13 (driver?) 010e 500000 ram14 (driver?) 010f 500000 ram15 (driver?) No filesystem could mount root, tried: ext3 ext2 Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0) Rebooting in 1 seconds.. The U-Boot is quite old but is what I found on the board, I just change the envirinment variables ramboot=3Drun ramargs;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;bootm $loadaddr $ramdiskaddr nfsboot=3Drun nfsargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr bootdelay=3D10 baudrate=3D115200 loads_echo=3D1 ethaddr=3D00:E0:0C:00:00:FD eth1addr=3D00:E0:0C:00:01:FD eth2addr=3D00:E0:0C:00:02:FD eth3addr=3D00:E0:0C:00:03:FD rootpath=3D/nfsroot bootfile=3Dyour.uImage netdev=3Deth0 consoledev=3DttyS0 ramdiskaddr=3D600000 ramdiskfile=3Dyour.ramdisk.u-boot fdtaddr=3D400000 fdtfile=3Dyour.fdt.dtb nfsargs=3Dsetenv bootargs root=3D/dev/nfs rw = nfsroot=3D$serverip:$rootpath ip=3D$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off console=3D$consoledev,$bau drate $othbootargs ramargs=3Dsetenv bootargs root=3D/dev/ram rw = console=3D$consoledev,$baudrate $othbootargs bootargs=3Droot=3D/dev/ram rw console=3DttyS0,115200 bootcmdAQ=3Dif itest ${aps} =3D=3D 0; then run dl_ram0; else run = dl_ram1;fi ethact=3DeTSEC0 filesize=3D4E0E64 fileaddr=3D2000000 gatewayip=3D192.168.1.1 netmask=3D255.255.255.0 ipaddr=3D192.168.0.126 serverip=3D192.168.0.33 bootcmdFREE=3Drun ramargs;cp.b fff00000 400000 3500;bootm ff800000 ffa00000 400000 myaps=3DMPC8568MDS/aps mtdargs=3Dmtdparts=3Dphysmap-flash.0:1M(boot),7M(aps0),7M(aps1),1M(optusr= ) pram=3D0x100000 mem=3D0x3f00000 pram_start=3D0x3f00000 loadaddr=3D0x2000000 aps0_fl_start=3D0xfe100000 aps0_fl_size=3D0x00700000 aps1_fl_start=3D0xfe800000 aps1_fl_end=3D0xfeefffff aps1_fl_size=3D0x00700000 aps_ram_start=3D0x2000000 aps_ram_kernel_start=3D0x2000100 aps_ram_dtb_start=3D0x21f0100 aps_ram_rootfs_start=3D0x2200100 aps=3D0 dl_boot=3Dtftp ${aps_ram_start} "u-boot.bin" && protect off 0xfe000000 0xfe07ffff && cp.b ${aps_ram_start} 0xfe000000 ${filesize} && protect on 0xfe000000 0xf e07ffff && saveenv bootcmd=3Dif itest ${aps} =3D=3D 0; then run dl_ram0; else run = dl_ram1;fi altbootcmd=3Dmw.b ${pram_start} 0 ${pram} && if itest ${aps} =3D=3D 0; = then setenv aps 1; else setenv aps 0; fi; saveenv; run bootcmd dl_ram0=3Dcp.b ${aps0_fl_start} ${aps_ram_start} ${aps0_fl_size};if imi ${aps_ram_kernel_start}; then run bargs;bootm ${aps_ram_kernel_start} ${aps_ram_rootfs _start} ${aps_ram_dtb_start}; else reset; fi dl_ram1=3Dcp.b ${aps1_fl_start} ${aps_ram_start} ${aps1_fl_size};if imi ${aps_ram_kernel_start}; then run bargs;bootm ${aps_ram_kernel_start} ${aps_ram_rootfs _start} ${aps_ram_dtb_start}; else reset; fi bootlimit=3D5 initrd_high=3Dno hostname=3DMPC8568MDS aps0_fl_end=3D0xfe7fffff dl_aps0=3Dtftp ${aps_ram_start} ${myaps};erase ${aps0_fl_start} ${aps0_fl_end};cp.b ${aps_ram_start} ${aps0_fl_start} ${filesize};boot dl_aps1=3Dtftp ${aps_ram_start} ${myaps};erase ${aps1_fl_start} ${aps1_fl_end};cp.b ${aps_ram_start} ${aps1_fl_start} ${filesize};boot bargs=3Dsetenv bootargs ${mtdargs} console=3DttyS0,$baudrate = root=3D/dev/ram ramdisk_size=3D500000 rw ip=3D${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:e th0:off panic=3D1 mem=3D${mem} aps=3D${aps} ${misc} ${slram} stdin=3Dserial stdout=3Dserial stderr=3Dserial Environment size: 2857/8188 bytes I am using linux2.6.25-denx with the followind mpc8568mds_defconfig >> cat kernel/linux/arch/powerpc/configs/mpc8568mds_defconfig # # Automatically generated make config: don't edit # Linux kernel version: 2.6.25.5 # Fri Aug 29 16:33:50 2008 # # CONFIG_PPC64 is not set # # Processor support # # CONFIG_6xx is not set CONFIG_PPC_85xx=3Dy # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_E500=3Dy CONFIG_BOOKE=3Dy CONFIG_FSL_BOOKE=3Dy CONFIG_FSL_EMB_PERFMON=3Dy # CONFIG_PHYS_64BIT is not set CONFIG_SPE=3Dy # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=3Dy CONFIG_WORD_SIZE=3D32 CONFIG_PPC_MERGE=3Dy CONFIG_MMU=3Dy CONFIG_GENERIC_CMOS_UPDATE=3Dy CONFIG_GENERIC_TIME=3Dy CONFIG_GENERIC_TIME_VSYSCALL=3Dy CONFIG_GENERIC_CLOCKEVENTS=3Dy CONFIG_GENERIC_HARDIRQS=3Dy # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=3Dy CONFIG_RWSEM_XCHGADD_ALGORITHM=3Dy CONFIG_ARCH_HAS_ILOG2_U32=3Dy CONFIG_GENERIC_HWEIGHT=3Dy CONFIG_GENERIC_CALIBRATE_DELAY=3Dy CONFIG_GENERIC_FIND_NEXT_BIT=3Dy # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=3Dy CONFIG_EARLY_PRINTK=3Dy CONFIG_GENERIC_NVRAM=3Dy CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=3Dy CONFIG_ARCH_MAY_HAVE_PC_FDC=3Dy CONFIG_PPC_OF=3Dy CONFIG_OF=3Dy CONFIG_PPC_UDBG_16550=3Dy # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=3Dy CONFIG_GENERIC_BUG=3Dy CONFIG_DEFAULT_UIMAGE=3Dy # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST=3D"/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=3Dy CONFIG_BROKEN_ON_SMP=3Dy CONFIG_INIT_ENV_ARG_LIMIT=3D32 CONFIG_LOCALVERSION=3D"" CONFIG_LOCALVERSION_AUTO=3Dy CONFIG_SWAP=3Dy CONFIG_SYSVIPC=3Dy CONFIG_SYSVIPC_SYSCTL=3Dy # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=3D14 # CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=3Dy # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=3Dy # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=3Dy CONFIG_SYSFS_DEPRECATED_V2=3Dy # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=3Dy CONFIG_EMBEDDED=3Dy CONFIG_SYSCTL_SYSCALL=3Dy # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=3Dy CONFIG_PRINTK=3Dy # CONFIG_LOGBUFFER is not set CONFIG_BUG=3Dy CONFIG_ELF_CORE=3Dy CONFIG_COMPAT_BRK=3Dy CONFIG_BASE_FULL=3Dy CONFIG_FUTEX=3Dy CONFIG_ANON_INODES=3Dy # CONFIG_EPOLL is not set CONFIG_SIGNALFD=3Dy CONFIG_TIMERFD=3Dy CONFIG_EVENTFD=3Dy CONFIG_SHMEM=3Dy CONFIG_VM_EVENT_COUNTERS=3Dy CONFIG_SLUB_DEBUG=3Dy # CONFIG_SLAB is not set CONFIG_SLUB=3Dy # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=3Dy CONFIG_HAVE_KPROBES=3Dy CONFIG_HAVE_KRETPROBES=3Dy CONFIG_PROC_PAGE_MONITOR=3Dy CONFIG_SLABINFO=3Dy CONFIG_RT_MUTEXES=3Dy # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=3D0 CONFIG_MODULES=3Dy CONFIG_MODULE_UNLOAD=3Dy # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set CONFIG_BLOCK=3Dy # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=3Dy CONFIG_IOSCHED_AS=3Dy CONFIG_IOSCHED_DEADLINE=3Dy CONFIG_IOSCHED_CFQ=3Dy CONFIG_DEFAULT_AS=3Dy # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED=3D"anticipatory" CONFIG_CLASSIC_RCU=3Dy # # Platform support # # CONFIG_PPC_MPC512x is not set # CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set CONFIG_MPC85xx=3Dy # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set CONFIG_MPC85xx_MDS=3Dy # CONFIG_MPC85xx_DS is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set # CONFIG_TQM8555 is not set # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set # CONFIG_SBC8560 is not set # CONFIG_IPIC is not set CONFIG_MPIC=3Dy # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set # CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set # CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set CONFIG_QUICC_ENGINE=3Dy # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # # Kernel options # # CONFIG_HIGHMEM is not set CONFIG_TICK_ONESHOT=3Dy CONFIG_NO_HZ=3Dy CONFIG_HIGH_RES_TIMERS=3Dy CONFIG_GENERIC_CLOCKEVENTS_BUILD=3Dy # CONFIG_HZ_100 is not set CONFIG_HZ_250=3Dy # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=3D250 # CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=3Dy # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=3Dy # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=3Dy # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=3Dy CONFIG_ARCH_HAS_WALK_MEMORY=3Dy CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=3Dy CONFIG_ARCH_FLATMEM_ENABLE=3Dy CONFIG_ARCH_POPULATES_NODE_MAP=3Dy CONFIG_SELECT_MEMORY_MODEL=3Dy CONFIG_FLATMEM_MANUAL=3Dy # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=3Dy CONFIG_FLAT_NODE_MEM_MAP=3Dy # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=3D4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=3D1 CONFIG_BOUNCE=3Dy CONFIG_VIRT_TO_BUS=3Dy CONFIG_PROC_DEVICETREE=3Dy # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set CONFIG_SECCOMP=3Dy CONFIG_ISA_DMA_API=3Dy # # Bus options # CONFIG_ZONE_DMA=3Dy CONFIG_PPC_INDIRECT_PCI=3Dy CONFIG_FSL_SOC=3Dy CONFIG_FSL_PCI=3Dy CONFIG_PCI=3Dy CONFIG_PCI_DOMAINS=3Dy CONFIG_PCI_SYSCALL=3Dy # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=3Dy # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=3Dy # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # # Advanced setup # # CONFIG_ADVANCED_OPTIONS is not set # # Default settings for advanced configuration options are used # CONFIG_HIGHMEM_START=3D0xfe000000 CONFIG_LOWMEM_SIZE=3D0x30000000 CONFIG_KERNEL_START=3D0xc0000000 CONFIG_TASK_SIZE=3D0xc0000000 CONFIG_BOOT_LOAD=3D0x00800000 # # Networking # CONFIG_NET=3Dy # # Networking options # CONFIG_PACKET=3Dy # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=3Dy CONFIG_XFRM=3Dy # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=3Dy CONFIG_IP_MULTICAST=3Dy # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=3Dy CONFIG_IP_PNP=3Dy CONFIG_IP_PNP_DHCP=3Dy CONFIG_IP_PNP_BOOTP=3Dy # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=3Dy # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=3Dy CONFIG_INET_XFRM_MODE_TUNNEL=3Dy CONFIG_INET_XFRM_MODE_BEET=3Dy # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=3Dy CONFIG_INET_TCP_DIAG=3Dy # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=3Dy CONFIG_DEFAULT_TCP_CONG=3D"cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set # # Wireless # # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH=3D"/sbin/hotplug" CONFIG_STANDALONE=3Dy CONFIG_PREVENT_FIRMWARE_BUILD=3Dy # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=3Dy # CONFIG_PARPORT is not set CONFIG_BLK_DEV=3Dy # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=3Dy # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=3Dy CONFIG_BLK_DEV_RAM_COUNT=3D16 CONFIG_BLK_DEV_RAM_SIZE=3D32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=3Dy # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set CONFIG_HAVE_IDE=3Dy # CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=3Dy CONFIG_SCSI_DMA=3Dy # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=3Dy # # SCSI support type (disk, tape, CD-ROM) # # CONFIG_BLK_DEV_SD is not set # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=3Dm # # SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=3Dy # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=3Dy # CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=3Dy # # MII PHY device drivers # CONFIG_MARVELL_PHY=3Dy # CONFIG_DAVICOM_PHY is not set # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set # CONFIG_CICADA_PHY is not set # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=3Dy CONFIG_MII=3Dy # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=3Dy # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set # CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=3Dy CONFIG_GFAR_NAPI=3Dy # CONFIG_UCC_GETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set CONFIG_NETDEV_10000=3Dy # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set # CONFIG_TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=3Dy # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=3Dy CONFIG_SERIAL_8250_CONSOLE=3Dy CONFIG_SERIAL_8250_PCI=3Dy CONFIG_SERIAL_8250_NR_UARTS=3D4 CONFIG_SERIAL_8250_RUNTIME_UARTS=3D4 # CONFIG_SERIAL_8250_EXTENDED is not set CONFIG_SERIAL_8250_SHARE_IRQ=3Dy # # Non-8250 serial port support # # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=3Dy CONFIG_SERIAL_CORE_CONSOLE=3Dy # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=3Dy CONFIG_LEGACY_PTYS=3Dy CONFIG_LEGACY_PTY_COUNT=3D256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=3Dy # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=3Dy CONFIG_I2C=3Dy CONFIG_I2C_BOARDINFO=3Dy CONFIG_I2C_CHARDEV=3Dy # # I2C Algorithms # # CONFIG_I2C_ALGOBIT is not set # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_IBM_OF is not set CONFIG_I2C_MPC=3Dy # CONFIG_I2C_MPC8260 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # # Miscellaneous I2C Chip support # # CONFIG_SENSORS_24C01A is not set # CONFIG_SENSORS_AD7416 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_MAX6900 is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # # SPI support # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=3Dy # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_FM75 is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1115 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=3Dy # CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers # # CONFIG_WD is not set # CONFIG_SOFT_WATCHDOG is not set # CONFIG_BOOKE_WDT is not set # # PCI-based Watchdog Cards # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set # # Sonics Silicon Backplane # CONFIG_SSB_POSSIBLE=3Dy # CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set CONFIG_DAB=3Dy # # Graphics support # # CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=3Dm # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=3Dy CONFIG_HID=3Dy # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set CONFIG_USB_SUPPORT=3Dy CONFIG_USB_ARCH_HAS_HCD=3Dy CONFIG_USB_ARCH_HAS_OHCI=3Dy CONFIG_USB_ARCH_HAS_EHCI=3Dy # CONFIG_USB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=3Dy CONFIG_RTC_CLASS=3Dy CONFIG_RTC_HCTOSYS=3Dy CONFIG_RTC_HCTOSYS_DEVICE=3D"rtc0" # CONFIG_RTC_DEBUG is not set # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=3Dy CONFIG_RTC_INTF_PROC=3Dy CONFIG_RTC_INTF_DEV=3Dy # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set CONFIG_RTC_DRV_DS1374=3Dy # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # # SPI RTC drivers # # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set # # Userspace I/O # # CONFIG_UIO is not set # # File systems # CONFIG_EXT2_FS=3Dy # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=3Dy CONFIG_EXT3_FS_XATTR=3Dy # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=3Dy CONFIG_FS_MBCACHE=3Dy # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=3Dy CONFIG_INOTIFY=3Dy CONFIG_INOTIFY_USER=3Dy # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # # CONFIG_MSDOS_FS is not set # CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=3Dy CONFIG_PROC_KCORE=3Dy CONFIG_PROC_SYSCTL=3Dy CONFIG_SYSFS=3Dy CONFIG_TMPFS=3Dy # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=3Dy CONFIG_NFS_FS=3Dy CONFIG_NFS_V3=3Dy # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=3Dy # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=3Dy CONFIG_LOCKD=3Dy CONFIG_LOCKD_V4=3Dy CONFIG_NFS_COMMON=3Dy CONFIG_SUNRPC=3Dy CONFIG_SUNRPC_GSS=3Dy # CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=3Dy # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=3Dy # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set # CONFIG_MSDOS_PARTITION is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set # # Library routines # CONFIG_BITREVERSE=3Dy # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=3Dy # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_PLIST=3Dy CONFIG_HAS_IOMEM=3Dy CONFIG_HAS_IOPORT=3Dy CONFIG_HAS_DMA=3Dy # # Kernel hacking # # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=3Dy CONFIG_ENABLE_MUST_CHECK=3Dy # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=3Dy # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=3Dy CONFIG_SCHED_DEBUG=3Dy # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_DEBUGGER=3Dy # CONFIG_XMON is not set # CONFIG_BDI_SWITCH is not set CONFIG_PPC_EARLY_DEBUG=3Dy # CONFIG_PPC_EARLY_DEBUG_LPAR is not set # CONFIG_PPC_EARLY_DEBUG_G5 is not set # CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set # CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set # CONFIG_PPC_EARLY_DEBUG_MAPLE is not set # CONFIG_PPC_EARLY_DEBUG_ISERIES is not set # CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set # CONFIG_PPC_EARLY_DEBUG_BEAT is not set # CONFIG_PPC_EARLY_DEBUG_44x is not set # CONFIG_PPC_EARLY_DEBUG_40x is not set # CONFIG_PPC_EARLY_DEBUG_CPM is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=3Dy CONFIG_CRYPTO_ALGAPI=3Dy CONFIG_CRYPTO_BLKCIPHER=3Dy # CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=3Dy # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=3Dy # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_ECB=3Dm CONFIG_CRYPTO_CBC=3Dy CONFIG_CRYPTO_PCBC=3Dm # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=3Dy # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_AES is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=3Dy # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=3Dy Does anyone know this problem? Thanks in advance Agostino Sette ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: MPC8568MDS RAMDISK Problem 2008-08-29 15:31 ` MPC8568MDS RAMDISK Problem SETTE AGOSTINO - technolabs @ 2008-08-29 18:03 ` Bhupender Saharan 2008-08-29 21:45 ` Anatolij Gustschin 1 sibling, 0 replies; 11+ messages in thread From: Bhupender Saharan @ 2008-08-29 18:03 UTC (permalink / raw) To: SETTE AGOSTINO - technolabs; +Cc: linuxppc-embedded [-- Attachment #1: Type: text/plain, Size: 41283 bytes --] Hi COuple of pthings bwhich i saw wrong: Your compressed image size is 3.5 MByte and you have provoided the ramdisk sizes as 5MByte. That is not correct. Uncompress ramdisk size would be more than 5MByte for sure. But from the log looks like kernel is not tring to find the ramdisk itself....? Need to check if Kernel is looking at correct address what boot loader has passed when checking for the ramdisk.... Bhupi www.e-coninfotech.com On 8/29/08, SETTE AGOSTINO - technolabs <Agostino.Sette@technolabs.it> wrote: > > Hi all, > > I am trying to port a RAMDISK Filesystem on the MPC8568MDS board but I > have the following problem: > U-Boot 1.3.0-rc3 (Nov 23 2007 - 18:17:06) > > CPU: 8568_E, Version: 1.1, (0x807d0011) > Core: E500, Version: 2.2, (0x80210022) > Clock Configuration: > CPU:1320 MHz, CCB: 528 MHz, > DDR: 264 MHz, LBC: 132 MHz > L1: D-cache 32 kB enabled > I-cache 32 kB enabled > Board: 8568 MDS > I2C: ready > DRAM: Initializing > SDRAM: 64 MB > DDR: 512 MB > FLASH: 32 MB > L2 cache 512KB: enabled > PCI: 32 bit, 66 MHz, async, host, arbiter > Scanning PCI bus 00 > PCI on bus 00 - 00 > > PCIE connected to slot as Root Complex (base address e000a000) > PCIE on bus 01 - 01 > In: serial > Out: serial > Err: serial > Net: UEC: PHY is Marvell 88E11x1 (1410cc2) > UEC: PHY is Marvell 88E11x1 (1410cc2) > eTSEC0, eTSEC1, FSL UEC0, FSL UEC1 > Hit any key to stop autoboot: 0 > > ## Checking Image at 02000100 ... > Image Name: Linux-2.6.25.5 > Image Type: PowerPC Linux Kernel Image (gzip compressed) > Data Size: 1325906 Bytes = 1.3 MB > Load Address: 00000000 > Entry Point: 00000000 > Verifying Checksum ... OK > ## Booting image at 02000100 ... > Image Name: Linux-2.6.25.5 > Image Type: PowerPC Linux Kernel Image (gzip compressed) > Data Size: 1325906 Bytes = 1.3 MB > Load Address: 00000000 > Entry Point: 00000000 > Verifying Checksum ... OK > Uncompressing Kernel Image ... OK > ## Loading RAMDisk Image at 02200100 ... > Image Name: initrd > Image Type: PowerPC Linux RAMDisk Image (gzip compressed) > Data Size: 3658144 Bytes = 3.5 MB > Load Address: 00000000 > Entry Point: 00000000 > Verifying Checksum ... OK > Booting using the fdt at 0x21f0100 > Loading Ramdisk to 00482000, end 007ff1a0 ... OK > Loading Device Tree to 007fa000, end 007fcfff ... OK > Using MPC85xx MDS machine description > Memory CAM mapping: CAM0=16Mb, CAM1=16Mb, CAM2=16Mb residual: 15Mb > Linux version 2.6.25.5 (ity10223@aqlbl05x) (gcc version 4.2.2) #1 Fri > Aug 29 16:44:02 CEST 2008 > Found legacy serial port 0 for /soc8568@e0000000/serial@4500 > mem=e0004500, taddr=e0004500, irq=0, clk=528000000, speed=0 > Found legacy serial port 1 for /soc8568@e0000000/serial@4600 > mem=e0004600, taddr=e0004600, irq=0, clk=528000000, speed=0 > console [udbg0] enabled > Entering add_active_range(0, 0, 12288) 0 entries of 256 used > setup_arch: bootmem > mpc85xx_mds_setup_arch() > Found FSL PCI host bridge at 0x00000000e0008000. Firmware bus number: > 0->0 > PCI host bridge /soc8568@e0000000/pci@8000 (primary) ranges: > Found FSL PCI host bridge at 0x00000000e000a000. Firmware bus number: > 0->0 > PCI host bridge /soc8568@e0000000/pcie@a000 ranges: > arch: exit > Top of RAM: 0x3000000, Total RAM: 0x3000000 > Memory hole size: 0MB > Zone PFN ranges: > DMA 0 -> 12288 > Normal 12288 -> 12288 > Movable zone start PFN for each node > early_node_map[1] active PFN ranges > 0: 0 -> 12288 > On node 0 totalpages: 12288 > DMA zone: 96 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 12192 pages, LIFO batch:1 > Normal zone: 0 pages used for memmap > Movable zone: 0 pages used for memmap > Built 1 zonelists in Zone order, mobility grouping on. Total pages: > 12192 > Kernel command line: > mtdparts=physmap-flash.0:1M(boot),7M(aps0),7M(aps1),1M(optusr) > console=ttyS0,115200 root=/dev/ram ramdisk_size=500000 rw ip=192.168.0.1 > 26:192.168.0.33:192.168.1.1:255.255.255.0:MPC8568MDS:eth0:off panic=1 > mem=0x3f00000 aps=0 > mpic: Setting up MPIC " OpenPIC " version 1.2 at e0040000, max 1 CPUs > mpic: ISU size: 80, shift: 7, mask: 7f > mpic: Initializing for 80 sources > PID hash table entries: 256 (order: 8, 1024 bytes) > time_init: decrementer frequency = 66.000000 MHz > time_init: processor frequency = 1320.000000 MHz > clocksource: timebase mult[3c9b26d] shift[22] registered > clockevent: decrementer mult[10e5] shift[16] cpu[0] > Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) > Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) > Memory: 42240k/49152k available (2632k kernel code, 6892k reserved, 104k > data, 96k bss, 128k init) > SLUB: Genslabs=12, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 > Calibrating delay loop... 131.58 BogoMIPS (lpj=263168) > Mount-cache hash table entries: 512 > net_namespace: 152 bytes > NET: Registered protocol family 16 > > PCI: Probing PCI hardware > Memory resource not set for host bridge 0 > PCI: 0001:01:00.0: class b20 doesn't match header type 01. Ignoring > class. > Memory resource not set for host bridge 1 > PCI: Closing bogus Apple Firmware region 1 on bus 0x02 > PCI: Closing bogus Apple Firmware region 2 on bus 0x02 > PCI: Bridge: 0001:01:00.0 > IO window: 0000-ffffffff > MEM window: 0x00000000-0xffffffff > PREFETCH window: disabled. > PCI: Enabling device 0001:01:00.0 (0106 -> 0107) > Registering qe_ic with sysfs... > SCSI subsystem initialized > NET: Registered protocol family 2 > Switched to high resolution mode on CPU 0 > IP route cache hash table entries: 1024 (order: 0, 4096 bytes) > TCP established hash table entries: 2048 (order: 2, 16384 bytes) > TCP bind hash table entries: 2048 (order: 1, 8192 bytes) > TCP: Hash tables configured (established 2048 bind 2048) > TCP reno registered > io scheduler noop registered > io scheduler anticipatory registered (default) > io scheduler deadline registered > io scheduler cfq registered > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > serial8250.0: ttyS0 at MMIO 0xe0004500 (irq = 42) is a 16550A > console > handover: boot [udbg0] -> real [ttyS0] > serial8250.0: ttyS1 at MMIO 0xe0004600 (irq = 42) is a 16550A > brd: module loaded > loop: module loaded > Gianfar MII Bus: probed > eth0: Gianfar Ethernet Controller Version 1.2, 00:e0:0c:00:00:fd > eth0: Running with NAPI enabled > eth0: 256/256 RX/TX BD ring size > eth1: Gianfar Ethernet Controller Version 1.2, 00:e0:0c:00:01:fd > eth1: Running with NAPI enabled > eth1: 256/256 RX/TX BD ring size > i2c /dev entries driver > rtc-ds1374 0-0068: rtc core: registered rtc-ds1374 as rtc0 > TCP cubic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > rtc-ds1374 0-0068: setting system clock to 1970-07-19 01:19:19 UTC > (17198359) > IP-Config: Gateway not on directly connected network. > List of all partitions: > 0100 500000 ram0 (driver?) > 0101 500000 ram1 (driver?) > 0102 500000 ram2 (driver?) > 0103 500000 ram3 (driver?) > 0104 500000 ram4 (driver?) > 0105 500000 ram5 (driver?) > 0106 500000 ram6 (driver?) > 0107 500000 ram7 (driver?) > 0108 500000 ram8 (driver?) > 0109 500000 ram9 (driver?) > 010a 500000 ram10 (driver?) > 010b 500000 ram11 (driver?) > 010c 500000 ram12 (driver?) > 010d 500000 ram13 (driver?) > 010e 500000 ram14 (driver?) > 010f 500000 ram15 (driver?) > No filesystem could mount root, tried: ext3 ext2 > Kernel panic - not syncing: VFS: Unable to mount root fs on > unknown-block(1,0) > Rebooting in 1 seconds.. > > The U-Boot is quite old but is what I found on the board, I just change > the envirinment variables > > ramboot=run ramargs;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr > $bootfile;bootm $loadaddr $ramdiskaddr > nfsboot=run nfsargs;tftp $loadaddr $bootfile;tftp $fdtaddr > $fdtfile;bootm $loadaddr - $fdtaddr > bootdelay=10 > baudrate=115200 > loads_echo=1 > ethaddr=00:E0:0C:00:00:FD > eth1addr=00:E0:0C:00:01:FD > eth2addr=00:E0:0C:00:02:FD > eth3addr=00:E0:0C:00:03:FD > rootpath=/nfsroot > bootfile=your.uImage > netdev=eth0 > consoledev=ttyS0 > ramdiskaddr=600000 > ramdiskfile=your.ramdisk.u-boot > fdtaddr=400000 > fdtfile=your.fdt.dtb > nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath > ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off > console=$consoledev,$bau > drate $othbootargs > ramargs=setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate > $othbootargs > bootargs=root=/dev/ram rw console=ttyS0,115200 > bootcmdAQ=if itest ${aps} == 0; then run dl_ram0; else run dl_ram1;fi > ethact=eTSEC0 > filesize=4E0E64 > fileaddr=2000000 > gatewayip=192.168.1.1 > netmask=255.255.255.0 > ipaddr=192.168.0.126 > serverip=192.168.0.33 > bootcmdFREE=run ramargs;cp.b fff00000 400000 3500;bootm ff800000 > ffa00000 400000 > myaps=MPC8568MDS/aps > mtdargs=mtdparts=physmap-flash.0:1M(boot),7M(aps0),7M(aps1),1M(optusr) > pram=0x100000 > mem=0x3f00000 > pram_start=0x3f00000 > loadaddr=0x2000000 > aps0_fl_start=0xfe100000 > aps0_fl_size=0x00700000 > aps1_fl_start=0xfe800000 > aps1_fl_end=0xfeefffff > aps1_fl_size=0x00700000 > aps_ram_start=0x2000000 > aps_ram_kernel_start=0x2000100 > aps_ram_dtb_start=0x21f0100 > aps_ram_rootfs_start=0x2200100 > aps=0 > dl_boot=tftp ${aps_ram_start} "u-boot.bin" && protect off 0xfe000000 > 0xfe07ffff && cp.b ${aps_ram_start} 0xfe000000 ${filesize} && protect on > 0xfe000000 0xf > e07ffff && saveenv > bootcmd=if itest ${aps} == 0; then run dl_ram0; else run dl_ram1;fi > altbootcmd=mw.b ${pram_start} 0 ${pram} && if itest ${aps} == 0; then > setenv aps 1; else setenv aps 0; fi; saveenv; run bootcmd > dl_ram0=cp.b ${aps0_fl_start} ${aps_ram_start} ${aps0_fl_size};if imi > ${aps_ram_kernel_start}; then run bargs;bootm ${aps_ram_kernel_start} > ${aps_ram_rootfs > _start} ${aps_ram_dtb_start}; else reset; fi > dl_ram1=cp.b ${aps1_fl_start} ${aps_ram_start} ${aps1_fl_size};if imi > ${aps_ram_kernel_start}; then run bargs;bootm ${aps_ram_kernel_start} > ${aps_ram_rootfs > _start} ${aps_ram_dtb_start}; else reset; fi > bootlimit=5 > initrd_high=no > hostname=MPC8568MDS > aps0_fl_end=0xfe7fffff > dl_aps0=tftp ${aps_ram_start} ${myaps};erase ${aps0_fl_start} > ${aps0_fl_end};cp.b ${aps_ram_start} ${aps0_fl_start} ${filesize};boot > dl_aps1=tftp ${aps_ram_start} ${myaps};erase ${aps1_fl_start} > ${aps1_fl_end};cp.b ${aps_ram_start} ${aps1_fl_start} ${filesize};boot > bargs=setenv bootargs ${mtdargs} console=ttyS0,$baudrate root=/dev/ram > ramdisk_size=500000 rw > ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:e > th0:off panic=1 mem=${mem} aps=${aps} ${misc} ${slram} > stdin=serial > stdout=serial > stderr=serial > > Environment size: 2857/8188 bytes > > I am using linux2.6.25-denx with the followind mpc8568mds_defconfig > > >> cat kernel/linux/arch/powerpc/configs/mpc8568mds_defconfig > # > # Automatically generated make config: don't edit > # Linux kernel version: 2.6.25.5 > # Fri Aug 29 16:33:50 2008 > # > # CONFIG_PPC64 is not set > > # > # Processor support > # > # CONFIG_6xx is not set > CONFIG_PPC_85xx=y > # CONFIG_PPC_8xx is not set > # CONFIG_40x is not set > # CONFIG_44x is not set > # CONFIG_E200 is not set > CONFIG_E500=y > CONFIG_BOOKE=y > CONFIG_FSL_BOOKE=y > CONFIG_FSL_EMB_PERFMON=y > # CONFIG_PHYS_64BIT is not set > CONFIG_SPE=y > # CONFIG_PPC_MM_SLICES is not set > CONFIG_PPC32=y > CONFIG_WORD_SIZE=32 > CONFIG_PPC_MERGE=y > CONFIG_MMU=y > CONFIG_GENERIC_CMOS_UPDATE=y > CONFIG_GENERIC_TIME=y > CONFIG_GENERIC_TIME_VSYSCALL=y > CONFIG_GENERIC_CLOCKEVENTS=y > CONFIG_GENERIC_HARDIRQS=y > # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set > CONFIG_IRQ_PER_CPU=y > CONFIG_RWSEM_XCHGADD_ALGORITHM=y > CONFIG_ARCH_HAS_ILOG2_U32=y > CONFIG_GENERIC_HWEIGHT=y > CONFIG_GENERIC_CALIBRATE_DELAY=y > CONFIG_GENERIC_FIND_NEXT_BIT=y > # CONFIG_ARCH_NO_VIRT_TO_BUS is not set > CONFIG_PPC=y > CONFIG_EARLY_PRINTK=y > CONFIG_GENERIC_NVRAM=y > CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y > CONFIG_ARCH_MAY_HAVE_PC_FDC=y > CONFIG_PPC_OF=y > CONFIG_OF=y > CONFIG_PPC_UDBG_16550=y > # CONFIG_GENERIC_TBSYNC is not set > CONFIG_AUDIT_ARCH=y > CONFIG_GENERIC_BUG=y > CONFIG_DEFAULT_UIMAGE=y > # CONFIG_PPC_DCR_NATIVE is not set > # CONFIG_PPC_DCR_MMIO is not set > CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" > > # > # General setup > # > CONFIG_EXPERIMENTAL=y > CONFIG_BROKEN_ON_SMP=y > CONFIG_INIT_ENV_ARG_LIMIT=32 > CONFIG_LOCALVERSION="" > CONFIG_LOCALVERSION_AUTO=y > CONFIG_SWAP=y > CONFIG_SYSVIPC=y > CONFIG_SYSVIPC_SYSCTL=y > # CONFIG_POSIX_MQUEUE is not set > # CONFIG_BSD_PROCESS_ACCT is not set > # CONFIG_TASKSTATS is not set > # CONFIG_AUDIT is not set > # CONFIG_IKCONFIG is not set > CONFIG_LOG_BUF_SHIFT=14 > # CONFIG_CGROUPS is not set > CONFIG_GROUP_SCHED=y > # CONFIG_FAIR_GROUP_SCHED is not set > # CONFIG_RT_GROUP_SCHED is not set > CONFIG_USER_SCHED=y > # CONFIG_CGROUP_SCHED is not set > CONFIG_SYSFS_DEPRECATED=y > CONFIG_SYSFS_DEPRECATED_V2=y > # CONFIG_RELAY is not set > # CONFIG_NAMESPACES is not set > # CONFIG_BLK_DEV_INITRD is not set > # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set > CONFIG_SYSCTL=y > CONFIG_EMBEDDED=y > CONFIG_SYSCTL_SYSCALL=y > # CONFIG_KALLSYMS is not set > CONFIG_HOTPLUG=y > CONFIG_PRINTK=y > # CONFIG_LOGBUFFER is not set > CONFIG_BUG=y > CONFIG_ELF_CORE=y > CONFIG_COMPAT_BRK=y > CONFIG_BASE_FULL=y > CONFIG_FUTEX=y > CONFIG_ANON_INODES=y > # CONFIG_EPOLL is not set > CONFIG_SIGNALFD=y > CONFIG_TIMERFD=y > CONFIG_EVENTFD=y > CONFIG_SHMEM=y > CONFIG_VM_EVENT_COUNTERS=y > CONFIG_SLUB_DEBUG=y > # CONFIG_SLAB is not set > CONFIG_SLUB=y > # CONFIG_SLOB is not set > # CONFIG_PROFILING is not set > # CONFIG_MARKERS is not set > CONFIG_HAVE_OPROFILE=y > CONFIG_HAVE_KPROBES=y > CONFIG_HAVE_KRETPROBES=y > CONFIG_PROC_PAGE_MONITOR=y > CONFIG_SLABINFO=y > CONFIG_RT_MUTEXES=y > # CONFIG_TINY_SHMEM is not set > CONFIG_BASE_SMALL=0 > CONFIG_MODULES=y > CONFIG_MODULE_UNLOAD=y > # CONFIG_MODULE_FORCE_UNLOAD is not set > # CONFIG_MODVERSIONS is not set > # CONFIG_MODULE_SRCVERSION_ALL is not set > # CONFIG_KMOD is not set > CONFIG_BLOCK=y > # CONFIG_LBD is not set > # CONFIG_BLK_DEV_IO_TRACE is not set > # CONFIG_LSF is not set > # CONFIG_BLK_DEV_BSG is not set > > # > # IO Schedulers > # > CONFIG_IOSCHED_NOOP=y > CONFIG_IOSCHED_AS=y > CONFIG_IOSCHED_DEADLINE=y > CONFIG_IOSCHED_CFQ=y > CONFIG_DEFAULT_AS=y > # CONFIG_DEFAULT_DEADLINE is not set > # CONFIG_DEFAULT_CFQ is not set > # CONFIG_DEFAULT_NOOP is not set > CONFIG_DEFAULT_IOSCHED="anticipatory" > CONFIG_CLASSIC_RCU=y > > # > # Platform support > # > # CONFIG_PPC_MPC512x is not set > # CONFIG_PPC_MPC5121 is not set > # CONFIG_PPC_CELL is not set > # CONFIG_PPC_CELL_NATIVE is not set > # CONFIG_PQ2ADS is not set > CONFIG_MPC85xx=y > # CONFIG_MPC8540_ADS is not set > # CONFIG_MPC8560_ADS is not set > # CONFIG_MPC85xx_CDS is not set > CONFIG_MPC85xx_MDS=y > # CONFIG_MPC85xx_DS is not set > # CONFIG_STX_GP3 is not set > # CONFIG_TQM8540 is not set > # CONFIG_TQM8541 is not set > # CONFIG_TQM8555 is not set > # CONFIG_TQM8560 is not set > # CONFIG_SBC8548 is not set > # CONFIG_SBC8560 is not set > # CONFIG_IPIC is not set > CONFIG_MPIC=y > # CONFIG_MPIC_WEIRD is not set > # CONFIG_PPC_I8259 is not set > # CONFIG_PPC_RTAS is not set > # CONFIG_MMIO_NVRAM is not set > # CONFIG_PPC_MPC106 is not set > # CONFIG_PPC_970_NAP is not set > # CONFIG_PPC_INDIRECT_IO is not set > # CONFIG_GENERIC_IOMAP is not set > # CONFIG_CPU_FREQ is not set > CONFIG_QUICC_ENGINE=y > # CONFIG_CPM2 is not set > # CONFIG_FSL_ULI1575 is not set > > # > # Kernel options > # > # CONFIG_HIGHMEM is not set > CONFIG_TICK_ONESHOT=y > CONFIG_NO_HZ=y > CONFIG_HIGH_RES_TIMERS=y > CONFIG_GENERIC_CLOCKEVENTS_BUILD=y > # CONFIG_HZ_100 is not set > CONFIG_HZ_250=y > # CONFIG_HZ_300 is not set > # CONFIG_HZ_1000 is not set > CONFIG_HZ=250 > # CONFIG_SCHED_HRTICK is not set > CONFIG_PREEMPT_NONE=y > # CONFIG_PREEMPT_VOLUNTARY is not set > # CONFIG_PREEMPT is not set > CONFIG_BINFMT_ELF=y > # CONFIG_BINFMT_MISC is not set > CONFIG_MATH_EMULATION=y > # CONFIG_IOMMU_HELPER is not set > CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y > CONFIG_ARCH_HAS_WALK_MEMORY=y > CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y > CONFIG_ARCH_FLATMEM_ENABLE=y > CONFIG_ARCH_POPULATES_NODE_MAP=y > CONFIG_SELECT_MEMORY_MODEL=y > CONFIG_FLATMEM_MANUAL=y > # CONFIG_DISCONTIGMEM_MANUAL is not set > # CONFIG_SPARSEMEM_MANUAL is not set > CONFIG_FLATMEM=y > CONFIG_FLAT_NODE_MEM_MAP=y > # CONFIG_SPARSEMEM_STATIC is not set > # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set > CONFIG_SPLIT_PTLOCK_CPUS=4 > # CONFIG_RESOURCES_64BIT is not set > CONFIG_ZONE_DMA_FLAG=1 > CONFIG_BOUNCE=y > CONFIG_VIRT_TO_BUS=y > CONFIG_PROC_DEVICETREE=y > # CONFIG_CMDLINE_BOOL is not set > # CONFIG_PM is not set > CONFIG_SECCOMP=y > CONFIG_ISA_DMA_API=y > > # > # Bus options > # > CONFIG_ZONE_DMA=y > CONFIG_PPC_INDIRECT_PCI=y > CONFIG_FSL_SOC=y > CONFIG_FSL_PCI=y > CONFIG_PCI=y > CONFIG_PCI_DOMAINS=y > CONFIG_PCI_SYSCALL=y > # CONFIG_PCIEPORTBUS is not set > CONFIG_ARCH_SUPPORTS_MSI=y > # CONFIG_PCI_MSI is not set > CONFIG_PCI_LEGACY=y > # CONFIG_PCI_DEBUG is not set > # CONFIG_PCCARD is not set > # CONFIG_HOTPLUG_PCI is not set > > # > # Advanced setup > # > # CONFIG_ADVANCED_OPTIONS is not set > > # > # Default settings for advanced configuration options are used > # > CONFIG_HIGHMEM_START=0xfe000000 > CONFIG_LOWMEM_SIZE=0x30000000 > CONFIG_KERNEL_START=0xc0000000 > CONFIG_TASK_SIZE=0xc0000000 > CONFIG_BOOT_LOAD=0x00800000 > > # > # Networking > # > CONFIG_NET=y > > # > # Networking options > # > CONFIG_PACKET=y > # CONFIG_PACKET_MMAP is not set > CONFIG_UNIX=y > CONFIG_XFRM=y > # CONFIG_XFRM_USER is not set > # CONFIG_XFRM_SUB_POLICY is not set > # CONFIG_XFRM_MIGRATE is not set > # CONFIG_XFRM_STATISTICS is not set > # CONFIG_NET_KEY is not set > CONFIG_INET=y > CONFIG_IP_MULTICAST=y > # CONFIG_IP_ADVANCED_ROUTER is not set > CONFIG_IP_FIB_HASH=y > CONFIG_IP_PNP=y > CONFIG_IP_PNP_DHCP=y > CONFIG_IP_PNP_BOOTP=y > # CONFIG_IP_PNP_RARP is not set > # CONFIG_NET_IPIP is not set > # CONFIG_NET_IPGRE is not set > # CONFIG_IP_MROUTE is not set > # CONFIG_ARPD is not set > CONFIG_SYN_COOKIES=y > # CONFIG_INET_AH is not set > # CONFIG_INET_ESP is not set > # CONFIG_INET_IPCOMP is not set > # CONFIG_INET_XFRM_TUNNEL is not set > # CONFIG_INET_TUNNEL is not set > CONFIG_INET_XFRM_MODE_TRANSPORT=y > CONFIG_INET_XFRM_MODE_TUNNEL=y > CONFIG_INET_XFRM_MODE_BEET=y > # CONFIG_INET_LRO is not set > CONFIG_INET_DIAG=y > CONFIG_INET_TCP_DIAG=y > # CONFIG_TCP_CONG_ADVANCED is not set > CONFIG_TCP_CONG_CUBIC=y > CONFIG_DEFAULT_TCP_CONG="cubic" > # CONFIG_TCP_MD5SIG is not set > # CONFIG_IPV6 is not set > # CONFIG_INET6_XFRM_TUNNEL is not set > # CONFIG_INET6_TUNNEL is not set > # CONFIG_NETWORK_SECMARK is not set > # CONFIG_NETFILTER is not set > # CONFIG_IP_DCCP is not set > # CONFIG_IP_SCTP is not set > # CONFIG_TIPC is not set > # CONFIG_ATM is not set > # CONFIG_BRIDGE is not set > # CONFIG_VLAN_8021Q is not set > # CONFIG_DECNET is not set > # CONFIG_LLC2 is not set > # CONFIG_IPX is not set > # CONFIG_ATALK is not set > # CONFIG_X25 is not set > # CONFIG_LAPB is not set > # CONFIG_ECONET is not set > # CONFIG_WAN_ROUTER is not set > # CONFIG_NET_SCHED is not set > > # > # Network testing > # > # CONFIG_NET_PKTGEN is not set > # CONFIG_HAMRADIO is not set > # CONFIG_CAN is not set > # CONFIG_IRDA is not set > # CONFIG_BT is not set > # CONFIG_AF_RXRPC is not set > > # > # Wireless > # > # CONFIG_CFG80211 is not set > # CONFIG_WIRELESS_EXT is not set > # CONFIG_MAC80211 is not set > # CONFIG_IEEE80211 is not set > # CONFIG_RFKILL is not set > # CONFIG_NET_9P is not set > > # > # Device Drivers > # > > # > # Generic Driver Options > # > CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" > CONFIG_STANDALONE=y > CONFIG_PREVENT_FIRMWARE_BUILD=y > # CONFIG_FW_LOADER is not set > # CONFIG_DEBUG_DRIVER is not set > # CONFIG_DEBUG_DEVRES is not set > # CONFIG_SYS_HYPERVISOR is not set > # CONFIG_CONNECTOR is not set > # CONFIG_MTD is not set > CONFIG_OF_DEVICE=y > # CONFIG_PARPORT is not set > CONFIG_BLK_DEV=y > # CONFIG_BLK_DEV_FD is not set > # CONFIG_BLK_CPQ_DA is not set > # CONFIG_BLK_CPQ_CISS_DA is not set > # CONFIG_BLK_DEV_DAC960 is not set > # CONFIG_BLK_DEV_UMEM is not set > # CONFIG_BLK_DEV_COW_COMMON is not set > CONFIG_BLK_DEV_LOOP=y > # CONFIG_BLK_DEV_CRYPTOLOOP is not set > # CONFIG_BLK_DEV_NBD is not set > # CONFIG_BLK_DEV_SX8 is not set > CONFIG_BLK_DEV_RAM=y > CONFIG_BLK_DEV_RAM_COUNT=16 > CONFIG_BLK_DEV_RAM_SIZE=32768 > # CONFIG_BLK_DEV_XIP is not set > # CONFIG_CDROM_PKTCDVD is not set > # CONFIG_ATA_OVER_ETH is not set > CONFIG_MISC_DEVICES=y > # CONFIG_PHANTOM is not set > # CONFIG_EEPROM_93CX6 is not set > # CONFIG_SGI_IOC4 is not set > # CONFIG_TIFM_CORE is not set > # CONFIG_ENCLOSURE_SERVICES is not set > CONFIG_HAVE_IDE=y > # CONFIG_IDE is not set > > # > # SCSI device support > # > # CONFIG_RAID_ATTRS is not set > CONFIG_SCSI=y > CONFIG_SCSI_DMA=y > # CONFIG_SCSI_TGT is not set > # CONFIG_SCSI_NETLINK is not set > CONFIG_SCSI_PROC_FS=y > > # > # SCSI support type (disk, tape, CD-ROM) > # > # CONFIG_BLK_DEV_SD is not set > # CONFIG_CHR_DEV_ST is not set > # CONFIG_CHR_DEV_OSST is not set > # CONFIG_BLK_DEV_SR is not set > # CONFIG_CHR_DEV_SG is not set > # CONFIG_CHR_DEV_SCH is not set > > # > # Some SCSI devices (e.g. CD jukebox) support multiple LUNs > # > # CONFIG_SCSI_MULTI_LUN is not set > # CONFIG_SCSI_CONSTANTS is not set > # CONFIG_SCSI_LOGGING is not set > # CONFIG_SCSI_SCAN_ASYNC is not set > CONFIG_SCSI_WAIT_SCAN=m > > # > # SCSI Transports > # > # CONFIG_SCSI_SPI_ATTRS is not set > # CONFIG_SCSI_FC_ATTRS is not set > # CONFIG_SCSI_ISCSI_ATTRS is not set > # CONFIG_SCSI_SAS_LIBSAS is not set > # CONFIG_SCSI_SRP_ATTRS is not set > CONFIG_SCSI_LOWLEVEL=y > # CONFIG_ISCSI_TCP is not set > # CONFIG_BLK_DEV_3W_XXXX_RAID is not set > # CONFIG_SCSI_3W_9XXX is not set > # CONFIG_SCSI_ACARD is not set > # CONFIG_SCSI_AACRAID is not set > # CONFIG_SCSI_AIC7XXX is not set > # CONFIG_SCSI_AIC7XXX_OLD is not set > # CONFIG_SCSI_AIC79XX is not set > # CONFIG_SCSI_AIC94XX is not set > # CONFIG_SCSI_DPT_I2O is not set > # CONFIG_SCSI_ADVANSYS is not set > # CONFIG_SCSI_ARCMSR is not set > # CONFIG_MEGARAID_NEWGEN is not set > # CONFIG_MEGARAID_LEGACY is not set > # CONFIG_MEGARAID_SAS is not set > # CONFIG_SCSI_HPTIOP is not set > # CONFIG_SCSI_BUSLOGIC is not set > # CONFIG_SCSI_DMX3191D is not set > # CONFIG_SCSI_EATA is not set > # CONFIG_SCSI_FUTURE_DOMAIN is not set > # CONFIG_SCSI_GDTH is not set > # CONFIG_SCSI_IPS is not set > # CONFIG_SCSI_INITIO is not set > # CONFIG_SCSI_INIA100 is not set > # CONFIG_SCSI_MVSAS is not set > # CONFIG_SCSI_STEX is not set > # CONFIG_SCSI_SYM53C8XX_2 is not set > # CONFIG_SCSI_QLOGIC_1280 is not set > # CONFIG_SCSI_QLA_FC is not set > # CONFIG_SCSI_QLA_ISCSI is not set > # CONFIG_SCSI_LPFC is not set > # CONFIG_SCSI_DC395x is not set > # CONFIG_SCSI_DC390T is not set > # CONFIG_SCSI_NSP32 is not set > # CONFIG_SCSI_DEBUG is not set > # CONFIG_SCSI_SRP is not set > # CONFIG_ATA is not set > # CONFIG_MD is not set > # CONFIG_FUSION is not set > > # > # IEEE 1394 (FireWire) support > # > # CONFIG_FIREWIRE is not set > # CONFIG_IEEE1394 is not set > # CONFIG_I2O is not set > # CONFIG_MACINTOSH_DRIVERS is not set > CONFIG_NETDEVICES=y > # CONFIG_NETDEVICES_MULTIQUEUE is not set > # CONFIG_DUMMY is not set > # CONFIG_BONDING is not set > # CONFIG_MACVLAN is not set > # CONFIG_EQUALIZER is not set > # CONFIG_TUN is not set > # CONFIG_VETH is not set > # CONFIG_ARCNET is not set > CONFIG_PHYLIB=y > > # > # MII PHY device drivers > # > CONFIG_MARVELL_PHY=y > # CONFIG_DAVICOM_PHY is not set > # CONFIG_QSEMI_PHY is not set > # CONFIG_LXT_PHY is not set > # CONFIG_CICADA_PHY is not set > # CONFIG_VITESSE_PHY is not set > # CONFIG_SMSC_PHY is not set > # CONFIG_BROADCOM_PHY is not set > # CONFIG_ICPLUS_PHY is not set > # CONFIG_REALTEK_PHY is not set > # CONFIG_FIXED_PHY is not set > # CONFIG_MDIO_BITBANG is not set > CONFIG_NET_ETHERNET=y > CONFIG_MII=y > # CONFIG_HAPPYMEAL is not set > # CONFIG_SUNGEM is not set > # CONFIG_CASSINI is not set > # CONFIG_NET_VENDOR_3COM is not set > # CONFIG_NET_TULIP is not set > # CONFIG_HP100 is not set > # CONFIG_IBM_NEW_EMAC_ZMII is not set > # CONFIG_IBM_NEW_EMAC_RGMII is not set > # CONFIG_IBM_NEW_EMAC_TAH is not set > # CONFIG_IBM_NEW_EMAC_EMAC4 is not set > # CONFIG_NET_PCI is not set > # CONFIG_B44 is not set > CONFIG_NETDEV_1000=y > # CONFIG_ACENIC is not set > # CONFIG_DL2K is not set > # CONFIG_E1000 is not set > # CONFIG_E1000E is not set > # CONFIG_E1000E_ENABLED is not set > # CONFIG_IP1000 is not set > # CONFIG_IGB is not set > # CONFIG_NS83820 is not set > # CONFIG_HAMACHI is not set > # CONFIG_YELLOWFIN is not set > # CONFIG_R8169 is not set > # CONFIG_SIS190 is not set > # CONFIG_SKGE is not set > # CONFIG_SKY2 is not set > # CONFIG_SK98LIN is not set > # CONFIG_VIA_VELOCITY is not set > # CONFIG_TIGON3 is not set > # CONFIG_BNX2 is not set > CONFIG_GIANFAR=y > CONFIG_GFAR_NAPI=y > # CONFIG_UCC_GETH is not set > # CONFIG_QLA3XXX is not set > # CONFIG_ATL1 is not set > CONFIG_NETDEV_10000=y > # CONFIG_CHELSIO_T1 is not set > # CONFIG_CHELSIO_T3 is not set > # CONFIG_IXGBE is not set > # CONFIG_IXGB is not set > # CONFIG_S2IO is not set > # CONFIG_MYRI10GE is not set > # CONFIG_NETXEN_NIC is not set > # CONFIG_NIU is not set > # CONFIG_MLX4_CORE is not set > # CONFIG_TEHUTI is not set > # CONFIG_BNX2X is not set > # CONFIG_TR is not set > > # > # Wireless LAN > # > # CONFIG_WLAN_PRE80211 is not set > # CONFIG_WLAN_80211 is not set > # CONFIG_WAN is not set > # CONFIG_FDDI is not set > # CONFIG_HIPPI is not set > # CONFIG_PPP is not set > # CONFIG_SLIP is not set > # CONFIG_NET_FC is not set > # CONFIG_NETCONSOLE is not set > # CONFIG_NETPOLL is not set > # CONFIG_NET_POLL_CONTROLLER is not set > # CONFIG_ISDN is not set > # CONFIG_PHONE is not set > > # > # Input device support > # > CONFIG_INPUT=y > # CONFIG_INPUT_FF_MEMLESS is not set > # CONFIG_INPUT_POLLDEV is not set > > # > # Userland interfaces > # > # CONFIG_INPUT_MOUSEDEV is not set > # CONFIG_INPUT_JOYDEV is not set > # CONFIG_INPUT_EVDEV is not set > # CONFIG_INPUT_EVBUG is not set > > # > # Input Device Drivers > # > # CONFIG_INPUT_KEYBOARD is not set > # CONFIG_INPUT_MOUSE is not set > # CONFIG_INPUT_JOYSTICK is not set > # CONFIG_INPUT_TABLET is not set > # CONFIG_INPUT_TOUCHSCREEN is not set > # CONFIG_INPUT_MISC is not set > > # > # Hardware I/O ports > # > # CONFIG_SERIO is not set > # CONFIG_GAMEPORT is not set > > # > # Character devices > # > # CONFIG_VT is not set > # CONFIG_SERIAL_NONSTANDARD is not set > # CONFIG_NOZOMI is not set > > # > # Serial drivers > # > CONFIG_SERIAL_8250=y > CONFIG_SERIAL_8250_CONSOLE=y > CONFIG_SERIAL_8250_PCI=y > CONFIG_SERIAL_8250_NR_UARTS=4 > CONFIG_SERIAL_8250_RUNTIME_UARTS=4 > # CONFIG_SERIAL_8250_EXTENDED is not set > CONFIG_SERIAL_8250_SHARE_IRQ=y > > # > # Non-8250 serial port support > # > # CONFIG_SERIAL_UARTLITE is not set > CONFIG_SERIAL_CORE=y > CONFIG_SERIAL_CORE_CONSOLE=y > # CONFIG_SERIAL_JSM is not set > # CONFIG_SERIAL_OF_PLATFORM is not set > # CONFIG_SERIAL_QE is not set > CONFIG_UNIX98_PTYS=y > CONFIG_LEGACY_PTYS=y > CONFIG_LEGACY_PTY_COUNT=256 > # CONFIG_IPMI_HANDLER is not set > CONFIG_HW_RANDOM=y > # CONFIG_NVRAM is not set > # CONFIG_GEN_RTC is not set > # CONFIG_R3964 is not set > # CONFIG_APPLICOM is not set > # CONFIG_RAW_DRIVER is not set > # CONFIG_TCG_TPM is not set > CONFIG_DEVPORT=y > CONFIG_I2C=y > CONFIG_I2C_BOARDINFO=y > CONFIG_I2C_CHARDEV=y > > # > # I2C Algorithms > # > # CONFIG_I2C_ALGOBIT is not set > # CONFIG_I2C_ALGOPCF is not set > # CONFIG_I2C_ALGOPCA is not set > > # > # I2C Hardware Bus support > # > # CONFIG_I2C_ALI1535 is not set > # CONFIG_I2C_ALI1563 is not set > # CONFIG_I2C_ALI15X3 is not set > # CONFIG_I2C_AMD756 is not set > # CONFIG_I2C_AMD8111 is not set > # CONFIG_I2C_I801 is not set > # CONFIG_I2C_I810 is not set > # CONFIG_I2C_PIIX4 is not set > # CONFIG_I2C_IBM_OF is not set > CONFIG_I2C_MPC=y > # CONFIG_I2C_MPC8260 is not set > # CONFIG_I2C_NFORCE2 is not set > # CONFIG_I2C_OCORES is not set > # CONFIG_I2C_PARPORT_LIGHT is not set > # CONFIG_I2C_PROSAVAGE is not set > # CONFIG_I2C_SAVAGE4 is not set > # CONFIG_I2C_SIMTEC is not set > # CONFIG_I2C_SIS5595 is not set > # CONFIG_I2C_SIS630 is not set > # CONFIG_I2C_SIS96X is not set > # CONFIG_I2C_TAOS_EVM is not set > # CONFIG_I2C_STUB is not set > # CONFIG_I2C_VIA is not set > # CONFIG_I2C_VIAPRO is not set > # CONFIG_I2C_VOODOO3 is not set > > # > # Miscellaneous I2C Chip support > # > # CONFIG_SENSORS_24C01A is not set > # CONFIG_SENSORS_AD7416 is not set > # CONFIG_DS1682 is not set > # CONFIG_SENSORS_EEPROM is not set > # CONFIG_SENSORS_MAX6900 is not set > # CONFIG_SENSORS_PCF8574 is not set > # CONFIG_PCF8575 is not set > # CONFIG_SENSORS_PCF8591 is not set > # CONFIG_TPS65010 is not set > # CONFIG_SENSORS_MAX6875 is not set > # CONFIG_SENSORS_TSL2550 is not set > # CONFIG_I2C_DEBUG_CORE is not set > # CONFIG_I2C_DEBUG_ALGO is not set > # CONFIG_I2C_DEBUG_BUS is not set > # CONFIG_I2C_DEBUG_CHIP is not set > > # > # SPI support > # > # CONFIG_SPI is not set > # CONFIG_SPI_MASTER is not set > # CONFIG_W1 is not set > # CONFIG_POWER_SUPPLY is not set > CONFIG_HWMON=y > # CONFIG_HWMON_VID is not set > # CONFIG_SENSORS_AD7414 is not set > # CONFIG_SENSORS_AD7418 is not set > # CONFIG_SENSORS_ADM1021 is not set > # CONFIG_SENSORS_ADM1025 is not set > # CONFIG_SENSORS_ADM1026 is not set > # CONFIG_SENSORS_ADM1029 is not set > # CONFIG_SENSORS_ADM1031 is not set > # CONFIG_SENSORS_ADM9240 is not set > # CONFIG_SENSORS_ADT7470 is not set > # CONFIG_SENSORS_ADT7473 is not set > # CONFIG_SENSORS_ATXP1 is not set > # CONFIG_SENSORS_DS1621 is not set > # CONFIG_SENSORS_I5K_AMB is not set > # CONFIG_SENSORS_F71805F is not set > # CONFIG_SENSORS_FM75 is not set > # CONFIG_SENSORS_F71882FG is not set > # CONFIG_SENSORS_F75375S is not set > # CONFIG_SENSORS_GL518SM is not set > # CONFIG_SENSORS_GL520SM is not set > # CONFIG_SENSORS_IT87 is not set > # CONFIG_SENSORS_LM63 is not set > # CONFIG_SENSORS_LM75 is not set > # CONFIG_SENSORS_LM77 is not set > # CONFIG_SENSORS_LM78 is not set > # CONFIG_SENSORS_LM80 is not set > # CONFIG_SENSORS_LM83 is not set > # CONFIG_SENSORS_LM85 is not set > # CONFIG_SENSORS_LM87 is not set > # CONFIG_SENSORS_LM90 is not set > # CONFIG_SENSORS_LM92 is not set > # CONFIG_SENSORS_LM93 is not set > # CONFIG_SENSORS_MAX1619 is not set > # CONFIG_SENSORS_MAX6650 is not set > # CONFIG_SENSORS_PC87360 is not set > # CONFIG_SENSORS_PC87427 is not set > # CONFIG_SENSORS_SIS5595 is not set > # CONFIG_SENSORS_DME1737 is not set > # CONFIG_SENSORS_SMSC47M1 is not set > # CONFIG_SENSORS_SMSC47M192 is not set > # CONFIG_SENSORS_SMSC47B397 is not set > # CONFIG_SENSORS_ADS7828 is not set > # CONFIG_SENSORS_THMC50 is not set > # CONFIG_SENSORS_VIA686A is not set > # CONFIG_SENSORS_VT1115 is not set > # CONFIG_SENSORS_VT1211 is not set > # CONFIG_SENSORS_VT8231 is not set > # CONFIG_SENSORS_W83781D is not set > # CONFIG_SENSORS_W83791D is not set > # CONFIG_SENSORS_W83792D is not set > # CONFIG_SENSORS_W83793 is not set > # CONFIG_SENSORS_W83L785TS is not set > # CONFIG_SENSORS_W83L786NG is not set > # CONFIG_SENSORS_W83627HF is not set > # CONFIG_SENSORS_W83627EHF is not set > # CONFIG_HWMON_DEBUG_CHIP is not set > # CONFIG_THERMAL is not set > CONFIG_WATCHDOG=y > # CONFIG_WATCHDOG_NOWAYOUT is not set > > # > # Watchdog Device Drivers > # > # CONFIG_WD is not set > # CONFIG_SOFT_WATCHDOG is not set > # CONFIG_BOOKE_WDT is not set > > # > # PCI-based Watchdog Cards > # > # CONFIG_PCIPCWATCHDOG is not set > # CONFIG_WDTPCI is not set > > # > # Sonics Silicon Backplane > # > CONFIG_SSB_POSSIBLE=y > # CONFIG_SSB is not set > > # > # Multifunction device drivers > # > # CONFIG_MFD_SM501 is not set > > # > # Multimedia devices > # > # CONFIG_VIDEO_DEV is not set > # CONFIG_DVB_CORE is not set > CONFIG_DAB=y > > # > # Graphics support > # > # CONFIG_AGP is not set > # CONFIG_DRM is not set > # CONFIG_VGASTATE is not set > CONFIG_VIDEO_OUTPUT_CONTROL=m > # CONFIG_FB is not set > # CONFIG_BACKLIGHT_LCD_SUPPORT is not set > > # > # Display device support > # > # CONFIG_DISPLAY_SUPPORT is not set > > # > # Sound > # > # CONFIG_SOUND is not set > CONFIG_HID_SUPPORT=y > CONFIG_HID=y > # CONFIG_HID_DEBUG is not set > # CONFIG_HIDRAW is not set > CONFIG_USB_SUPPORT=y > CONFIG_USB_ARCH_HAS_HCD=y > CONFIG_USB_ARCH_HAS_OHCI=y > CONFIG_USB_ARCH_HAS_EHCI=y > # CONFIG_USB is not set > > # > # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' > # > # CONFIG_USB_GADGET is not set > # CONFIG_MMC is not set > # CONFIG_MEMSTICK is not set > # CONFIG_NEW_LEDS is not set > # CONFIG_INFINIBAND is not set > # CONFIG_EDAC is not set > CONFIG_RTC_LIB=y > CONFIG_RTC_CLASS=y > CONFIG_RTC_HCTOSYS=y > CONFIG_RTC_HCTOSYS_DEVICE="rtc0" > # CONFIG_RTC_DEBUG is not set > > # > # RTC interfaces > # > CONFIG_RTC_INTF_SYSFS=y > CONFIG_RTC_INTF_PROC=y > CONFIG_RTC_INTF_DEV=y > # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set > # CONFIG_RTC_DRV_TEST is not set > > # > # I2C RTC drivers > # > # CONFIG_RTC_DRV_DS1307 is not set > CONFIG_RTC_DRV_DS1374=y > # CONFIG_RTC_DRV_DS1672 is not set > # CONFIG_RTC_DRV_MAX6900 is not set > # CONFIG_RTC_DRV_RS5C372 is not set > # CONFIG_RTC_DRV_ISL1208 is not set > # CONFIG_RTC_DRV_X1205 is not set > # CONFIG_RTC_DRV_PCF8563 is not set > # CONFIG_RTC_DRV_PCF8583 is not set > # CONFIG_RTC_DRV_M41T80 is not set > # CONFIG_RTC_DRV_S35390A is not set > > # > # SPI RTC drivers > # > > # > # Platform RTC drivers > # > # CONFIG_RTC_DRV_CMOS is not set > # CONFIG_RTC_DRV_DS1511 is not set > # CONFIG_RTC_DRV_DS1553 is not set > # CONFIG_RTC_DRV_DS1742 is not set > # CONFIG_RTC_DRV_STK17TA8 is not set > # CONFIG_RTC_DRV_M48T86 is not set > # CONFIG_RTC_DRV_M48T59 is not set > # CONFIG_RTC_DRV_V3020 is not set > > # > # on-CPU RTC drivers > # > # CONFIG_DMADEVICES is not set > > # > # Userspace I/O > # > # CONFIG_UIO is not set > > # > # File systems > # > CONFIG_EXT2_FS=y > # CONFIG_EXT2_FS_XATTR is not set > # CONFIG_EXT2_FS_XIP is not set > CONFIG_EXT3_FS=y > CONFIG_EXT3_FS_XATTR=y > # CONFIG_EXT3_FS_POSIX_ACL is not set > # CONFIG_EXT3_FS_SECURITY is not set > # CONFIG_EXT4DEV_FS is not set > CONFIG_JBD=y > CONFIG_FS_MBCACHE=y > # CONFIG_REISERFS_FS is not set > # CONFIG_JFS_FS is not set > # CONFIG_FS_POSIX_ACL is not set > # CONFIG_XFS_FS is not set > # CONFIG_GFS2_FS is not set > # CONFIG_OCFS2_FS is not set > CONFIG_DNOTIFY=y > CONFIG_INOTIFY=y > CONFIG_INOTIFY_USER=y > # CONFIG_QUOTA is not set > # CONFIG_AUTOFS_FS is not set > # CONFIG_AUTOFS4_FS is not set > # CONFIG_FUSE_FS is not set > > # > # CD-ROM/DVD Filesystems > # > # CONFIG_ISO9660_FS is not set > # CONFIG_UDF_FS is not set > > # > # DOS/FAT/NT Filesystems > # > # CONFIG_MSDOS_FS is not set > # CONFIG_VFAT_FS is not set > # CONFIG_NTFS_FS is not set > > # > # Pseudo filesystems > # > CONFIG_PROC_FS=y > CONFIG_PROC_KCORE=y > CONFIG_PROC_SYSCTL=y > CONFIG_SYSFS=y > CONFIG_TMPFS=y > # CONFIG_TMPFS_POSIX_ACL is not set > # CONFIG_HUGETLB_PAGE is not set > # CONFIG_CONFIGFS_FS is not set > > # > # Miscellaneous filesystems > # > # CONFIG_ADFS_FS is not set > # CONFIG_AFFS_FS is not set > # CONFIG_HFS_FS is not set > # CONFIG_HFSPLUS_FS is not set > # CONFIG_BEFS_FS is not set > # CONFIG_BFS_FS is not set > # CONFIG_EFS_FS is not set > # CONFIG_CRAMFS is not set > # CONFIG_VXFS_FS is not set > # CONFIG_MINIX_FS is not set > # CONFIG_HPFS_FS is not set > # CONFIG_QNX4FS_FS is not set > # CONFIG_ROMFS_FS is not set > # CONFIG_SYSV_FS is not set > # CONFIG_UFS_FS is not set > CONFIG_NETWORK_FILESYSTEMS=y > CONFIG_NFS_FS=y > CONFIG_NFS_V3=y > # CONFIG_NFS_V3_ACL is not set > CONFIG_NFS_V4=y > # CONFIG_NFS_DIRECTIO is not set > # CONFIG_NFSD is not set > CONFIG_ROOT_NFS=y > CONFIG_LOCKD=y > CONFIG_LOCKD_V4=y > CONFIG_NFS_COMMON=y > CONFIG_SUNRPC=y > CONFIG_SUNRPC_GSS=y > # CONFIG_SUNRPC_BIND34 is not set > CONFIG_RPCSEC_GSS_KRB5=y > # CONFIG_RPCSEC_GSS_SPKM3 is not set > # CONFIG_SMB_FS is not set > # CONFIG_CIFS is not set > # CONFIG_NCP_FS is not set > # CONFIG_CODA_FS is not set > # CONFIG_AFS_FS is not set > > # > # Partition Types > # > CONFIG_PARTITION_ADVANCED=y > # CONFIG_ACORN_PARTITION is not set > # CONFIG_OSF_PARTITION is not set > # CONFIG_AMIGA_PARTITION is not set > # CONFIG_ATARI_PARTITION is not set > # CONFIG_MAC_PARTITION is not set > # CONFIG_MSDOS_PARTITION is not set > # CONFIG_LDM_PARTITION is not set > # CONFIG_SGI_PARTITION is not set > # CONFIG_ULTRIX_PARTITION is not set > # CONFIG_SUN_PARTITION is not set > # CONFIG_KARMA_PARTITION is not set > # CONFIG_EFI_PARTITION is not set > # CONFIG_SYSV68_PARTITION is not set > # CONFIG_NLS is not set > # CONFIG_DLM is not set > > # > # Library routines > # > CONFIG_BITREVERSE=y > # CONFIG_CRC_CCITT is not set > # CONFIG_CRC16 is not set > # CONFIG_CRC_ITU_T is not set > CONFIG_CRC32=y > # CONFIG_CRC7 is not set > # CONFIG_LIBCRC32C is not set > CONFIG_PLIST=y > CONFIG_HAS_IOMEM=y > CONFIG_HAS_IOPORT=y > CONFIG_HAS_DMA=y > > # > # Kernel hacking > # > # CONFIG_PRINTK_TIME is not set > CONFIG_ENABLE_WARN_DEPRECATED=y > CONFIG_ENABLE_MUST_CHECK=y > # CONFIG_MAGIC_SYSRQ is not set > # CONFIG_UNUSED_SYMBOLS is not set > # CONFIG_DEBUG_FS is not set > # CONFIG_HEADERS_CHECK is not set > CONFIG_DEBUG_KERNEL=y > # CONFIG_DEBUG_SHIRQ is not set > CONFIG_DETECT_SOFTLOCKUP=y > CONFIG_SCHED_DEBUG=y > # CONFIG_SCHEDSTATS is not set > # CONFIG_TIMER_STATS is not set > # CONFIG_SLUB_DEBUG_ON is not set > # CONFIG_SLUB_STATS is not set > # CONFIG_DEBUG_RT_MUTEXES is not set > # CONFIG_RT_MUTEX_TESTER is not set > # CONFIG_DEBUG_SPINLOCK is not set > # CONFIG_DEBUG_MUTEXES is not set > # CONFIG_DEBUG_SPINLOCK_SLEEP is not set > # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set > # CONFIG_DEBUG_KOBJECT is not set > # CONFIG_DEBUG_BUGVERBOSE is not set > # CONFIG_DEBUG_INFO is not set > # CONFIG_DEBUG_VM is not set > # CONFIG_DEBUG_LIST is not set > # CONFIG_DEBUG_SG is not set > # CONFIG_BOOT_PRINTK_DELAY is not set > # CONFIG_RCU_TORTURE_TEST is not set > # CONFIG_BACKTRACE_SELF_TEST is not set > # CONFIG_FAULT_INJECTION is not set > # CONFIG_SAMPLES is not set > # CONFIG_DEBUG_STACKOVERFLOW is not set > # CONFIG_DEBUG_STACK_USAGE is not set > # CONFIG_DEBUG_PAGEALLOC is not set > CONFIG_DEBUGGER=y > # CONFIG_XMON is not set > # CONFIG_BDI_SWITCH is not set > CONFIG_PPC_EARLY_DEBUG=y > # CONFIG_PPC_EARLY_DEBUG_LPAR is not set > # CONFIG_PPC_EARLY_DEBUG_G5 is not set > # CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set > # CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set > # CONFIG_PPC_EARLY_DEBUG_MAPLE is not set > # CONFIG_PPC_EARLY_DEBUG_ISERIES is not set > # CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set > # CONFIG_PPC_EARLY_DEBUG_BEAT is not set > # CONFIG_PPC_EARLY_DEBUG_44x is not set > # CONFIG_PPC_EARLY_DEBUG_40x is not set > # CONFIG_PPC_EARLY_DEBUG_CPM is not set > > # > # Security options > # > # CONFIG_KEYS is not set > # CONFIG_SECURITY is not set > # CONFIG_SECURITY_FILE_CAPABILITIES is not set > CONFIG_CRYPTO=y > CONFIG_CRYPTO_ALGAPI=y > CONFIG_CRYPTO_BLKCIPHER=y > # CONFIG_CRYPTO_SEQIV is not set > CONFIG_CRYPTO_MANAGER=y > # CONFIG_CRYPTO_HMAC is not set > # CONFIG_CRYPTO_XCBC is not set > # CONFIG_CRYPTO_NULL is not set > # CONFIG_CRYPTO_MD4 is not set > CONFIG_CRYPTO_MD5=y > # CONFIG_CRYPTO_SHA1 is not set > # CONFIG_CRYPTO_SHA256 is not set > # CONFIG_CRYPTO_SHA512 is not set > # CONFIG_CRYPTO_WP512 is not set > # CONFIG_CRYPTO_TGR192 is not set > # CONFIG_CRYPTO_GF128MUL is not set > CONFIG_CRYPTO_ECB=m > CONFIG_CRYPTO_CBC=y > CONFIG_CRYPTO_PCBC=m > # CONFIG_CRYPTO_LRW is not set > # CONFIG_CRYPTO_XTS is not set > # CONFIG_CRYPTO_CTR is not set > # CONFIG_CRYPTO_GCM is not set > # CONFIG_CRYPTO_CCM is not set > # CONFIG_CRYPTO_CRYPTD is not set > CONFIG_CRYPTO_DES=y > # CONFIG_CRYPTO_FCRYPT is not set > # CONFIG_CRYPTO_BLOWFISH is not set > # CONFIG_CRYPTO_TWOFISH is not set > # CONFIG_CRYPTO_SERPENT is not set > # CONFIG_CRYPTO_AES is not set > # CONFIG_CRYPTO_CAST5 is not set > # CONFIG_CRYPTO_CAST6 is not set > # CONFIG_CRYPTO_TEA is not set > # CONFIG_CRYPTO_ARC4 is not set > # CONFIG_CRYPTO_KHAZAD is not set > # CONFIG_CRYPTO_ANUBIS is not set > # CONFIG_CRYPTO_SEED is not set > # CONFIG_CRYPTO_SALSA20 is not set > # CONFIG_CRYPTO_DEFLATE is not set > # CONFIG_CRYPTO_MICHAEL_MIC is not set > # CONFIG_CRYPTO_CRC32C is not set > # CONFIG_CRYPTO_CAMELLIA is not set > # CONFIG_CRYPTO_TEST is not set > # CONFIG_CRYPTO_AUTHENC is not set > # CONFIG_CRYPTO_LZO is not set > CONFIG_CRYPTO_HW=y > # CONFIG_CRYPTO_DEV_HIFN_795X is not set > # CONFIG_PPC_CLOCK is not set > CONFIG_PPC_LIB_RHEAP=y > > Does anyone know this problem? > > Thanks in advance > > Agostino Sette > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > [-- Attachment #2: Type: text/html, Size: 45542 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: MPC8568MDS RAMDISK Problem 2008-08-29 15:31 ` MPC8568MDS RAMDISK Problem SETTE AGOSTINO - technolabs 2008-08-29 18:03 ` Bhupender Saharan @ 2008-08-29 21:45 ` Anatolij Gustschin 2008-09-01 9:02 ` SETTE AGOSTINO - technolabs 1 sibling, 1 reply; 11+ messages in thread From: Anatolij Gustschin @ 2008-08-29 21:45 UTC (permalink / raw) To: SETTE AGOSTINO - technolabs; +Cc: linuxppc-embedded SETTE AGOSTINO - technolabs wrote: > Hi all, > > I am trying to port a RAMDISK Filesystem on the MPC8568MDS board but I > have the following problem: <snip> > # > # General setup > # > CONFIG_EXPERIMENTAL=y > CONFIG_BROKEN_ON_SMP=y > CONFIG_INIT_ENV_ARG_LIMIT=32 > CONFIG_LOCALVERSION="" > CONFIG_LOCALVERSION_AUTO=y > CONFIG_SWAP=y > CONFIG_SYSVIPC=y > CONFIG_SYSVIPC_SYSCTL=y > # CONFIG_POSIX_MQUEUE is not set > # CONFIG_BSD_PROCESS_ACCT is not set > # CONFIG_TASKSTATS is not set > # CONFIG_AUDIT is not set > # CONFIG_IKCONFIG is not set > CONFIG_LOG_BUF_SHIFT=14 > # CONFIG_CGROUPS is not set > CONFIG_GROUP_SCHED=y > # CONFIG_FAIR_GROUP_SCHED is not set > # CONFIG_RT_GROUP_SCHED is not set > CONFIG_USER_SCHED=y > # CONFIG_CGROUP_SCHED is not set > CONFIG_SYSFS_DEPRECATED=y > CONFIG_SYSFS_DEPRECATED_V2=y > # CONFIG_RELAY is not set > # CONFIG_NAMESPACES is not set > # CONFIG_BLK_DEV_INITRD is not set ------------------>^^^^^^^^^^^^^^^^^ Your kernel doesn't include RAM disk support. Enable "Initial RAM filesystem and RAM disk" and try again. Best regards, Anatolij ^ permalink raw reply [flat|nested] 11+ messages in thread
* RE: MPC8568MDS RAMDISK Problem 2008-08-29 21:45 ` Anatolij Gustschin @ 2008-09-01 9:02 ` SETTE AGOSTINO - technolabs 2008-09-02 10:10 ` Anatolij Gustschin 0 siblings, 1 reply; 11+ messages in thread From: SETTE AGOSTINO - technolabs @ 2008-09-01 9:02 UTC (permalink / raw) To: Anatolij Gustschin; +Cc: linuxppc-embedded Hi Anatolij, First of all thanks for your help. I modified the mpc8568mds_defconfig >> cat kernel/linux/arch/powerpc/configs/mpc8568mds_defconfig # # Automatically generated make config: don't edit # Linux kernel version: 2.6.25.5 # Mon Sep 1 10:01:48 2008 # # CONFIG_PPC64 is not set # # Processor support # # CONFIG_6xx is not set CONFIG_PPC_85xx=3Dy # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_E500=3Dy CONFIG_BOOKE=3Dy CONFIG_FSL_BOOKE=3Dy CONFIG_FSL_EMB_PERFMON=3Dy # CONFIG_PHYS_64BIT is not set CONFIG_SPE=3Dy # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=3Dy CONFIG_WORD_SIZE=3D32 CONFIG_PPC_MERGE=3Dy CONFIG_MMU=3Dy CONFIG_GENERIC_CMOS_UPDATE=3Dy CONFIG_GENERIC_TIME=3Dy CONFIG_GENERIC_TIME_VSYSCALL=3Dy CONFIG_GENERIC_CLOCKEVENTS=3Dy CONFIG_GENERIC_HARDIRQS=3Dy # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=3Dy CONFIG_RWSEM_XCHGADD_ALGORITHM=3Dy CONFIG_ARCH_HAS_ILOG2_U32=3Dy CONFIG_GENERIC_HWEIGHT=3Dy CONFIG_GENERIC_CALIBRATE_DELAY=3Dy CONFIG_GENERIC_FIND_NEXT_BIT=3Dy # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=3Dy CONFIG_EARLY_PRINTK=3Dy CONFIG_GENERIC_NVRAM=3Dy CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=3Dy CONFIG_ARCH_MAY_HAVE_PC_FDC=3Dy CONFIG_PPC_OF=3Dy CONFIG_OF=3Dy CONFIG_PPC_UDBG_16550=3Dy # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=3Dy CONFIG_GENERIC_BUG=3Dy CONFIG_DEFAULT_UIMAGE=3Dy # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST=3D"/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=3Dy CONFIG_BROKEN_ON_SMP=3Dy CONFIG_INIT_ENV_ARG_LIMIT=3D32 CONFIG_LOCALVERSION=3D"" CONFIG_LOCALVERSION_AUTO=3Dy CONFIG_SWAP=3Dy CONFIG_SYSVIPC=3Dy CONFIG_SYSVIPC_SYSCTL=3Dy # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=3D14 # CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=3Dy # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=3Dy # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=3Dy CONFIG_SYSFS_DEPRECATED_V2=3Dy # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=3Dy CONFIG_INITRAMFS_SOURCE=3D"" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=3Dy CONFIG_EMBEDDED=3Dy CONFIG_SYSCTL_SYSCALL=3Dy # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=3Dy CONFIG_PRINTK=3Dy # CONFIG_LOGBUFFER is not set CONFIG_BUG=3Dy CONFIG_ELF_CORE=3Dy CONFIG_COMPAT_BRK=3Dy CONFIG_BASE_FULL=3Dy CONFIG_FUTEX=3Dy CONFIG_ANON_INODES=3Dy # CONFIG_EPOLL is not set CONFIG_SIGNALFD=3Dy CONFIG_TIMERFD=3Dy CONFIG_EVENTFD=3Dy CONFIG_SHMEM=3Dy CONFIG_VM_EVENT_COUNTERS=3Dy CONFIG_SLUB_DEBUG=3Dy # CONFIG_SLAB is not set CONFIG_SLUB=3Dy # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=3Dy CONFIG_HAVE_KPROBES=3Dy CONFIG_HAVE_KRETPROBES=3Dy CONFIG_PROC_PAGE_MONITOR=3Dy CONFIG_SLABINFO=3Dy CONFIG_RT_MUTEXES=3Dy # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=3D0 CONFIG_MODULES=3Dy CONFIG_MODULE_UNLOAD=3Dy # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set CONFIG_BLOCK=3Dy # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=3Dy CONFIG_IOSCHED_AS=3Dy CONFIG_IOSCHED_DEADLINE=3Dy CONFIG_IOSCHED_CFQ=3Dy CONFIG_DEFAULT_AS=3Dy # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED=3D"anticipatory" CONFIG_CLASSIC_RCU=3Dy # # Platform support # # CONFIG_PPC_MPC512x is not set # CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set CONFIG_MPC85xx=3Dy # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set CONFIG_MPC85xx_MDS=3Dy # CONFIG_MPC85xx_DS is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set # CONFIG_TQM8555 is not set # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set # CONFIG_SBC8560 is not set # CONFIG_IPIC is not set CONFIG_MPIC=3Dy # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set # CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set # CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set CONFIG_QUICC_ENGINE=3Dy # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # # Kernel options # # CONFIG_HIGHMEM is not set CONFIG_TICK_ONESHOT=3Dy CONFIG_NO_HZ=3Dy CONFIG_HIGH_RES_TIMERS=3Dy CONFIG_GENERIC_CLOCKEVENTS_BUILD=3Dy # CONFIG_HZ_100 is not set CONFIG_HZ_250=3Dy # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=3D250 # CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=3Dy # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=3Dy # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=3Dy # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=3Dy CONFIG_ARCH_HAS_WALK_MEMORY=3Dy CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=3Dy CONFIG_ARCH_FLATMEM_ENABLE=3Dy CONFIG_ARCH_POPULATES_NODE_MAP=3Dy CONFIG_SELECT_MEMORY_MODEL=3Dy CONFIG_FLATMEM_MANUAL=3Dy # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=3Dy CONFIG_FLAT_NODE_MEM_MAP=3Dy # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=3D4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=3D1 CONFIG_BOUNCE=3Dy CONFIG_VIRT_TO_BUS=3Dy CONFIG_PROC_DEVICETREE=3Dy # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set CONFIG_SECCOMP=3Dy CONFIG_ISA_DMA_API=3Dy # # Bus options # CONFIG_ZONE_DMA=3Dy CONFIG_PPC_INDIRECT_PCI=3Dy CONFIG_FSL_SOC=3Dy CONFIG_FSL_PCI=3Dy CONFIG_PCI=3Dy CONFIG_PCI_DOMAINS=3Dy CONFIG_PCI_SYSCALL=3Dy # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=3Dy # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=3Dy # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # # Advanced setup # # CONFIG_ADVANCED_OPTIONS is not set # # Default settings for advanced configuration options are used # CONFIG_HIGHMEM_START=3D0xfe000000 CONFIG_LOWMEM_SIZE=3D0x30000000 CONFIG_KERNEL_START=3D0xc0000000 CONFIG_TASK_SIZE=3D0xc0000000 CONFIG_BOOT_LOAD=3D0x00800000 # # Networking # CONFIG_NET=3Dy # # Networking options # CONFIG_PACKET=3Dy # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=3Dy CONFIG_XFRM=3Dy # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=3Dy CONFIG_IP_MULTICAST=3Dy # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=3Dy CONFIG_IP_PNP=3Dy CONFIG_IP_PNP_DHCP=3Dy CONFIG_IP_PNP_BOOTP=3Dy # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=3Dy # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=3Dy CONFIG_INET_XFRM_MODE_TUNNEL=3Dy CONFIG_INET_XFRM_MODE_BEET=3Dy # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=3Dy CONFIG_INET_TCP_DIAG=3Dy # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=3Dy CONFIG_DEFAULT_TCP_CONG=3D"cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set # # Wireless # # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH=3D"/sbin/hotplug" CONFIG_STANDALONE=3Dy CONFIG_PREVENT_FIRMWARE_BUILD=3Dy # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=3Dy # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=3Dy CONFIG_MTD_PARTITIONS=3Dy # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=3Dy # CONFIG_MTD_OF_PARTS is not set # # User Modules And Translation Layers # CONFIG_MTD_CHAR=3Dy CONFIG_MTD_BLKDEVS=3Dy CONFIG_MTD_BLOCK=3Dy # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set # CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers # CONFIG_MTD_CFI=3Dy # CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=3Dy # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=3Dy CONFIG_MTD_MAP_BANK_WIDTH_2=3Dy CONFIG_MTD_MAP_BANK_WIDTH_4=3Dy # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=3Dy CONFIG_MTD_CFI_I2=3Dy # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set CONFIG_MTD_CFI_INTELEXT=3Dy # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=3Dy # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=3Dy CONFIG_MTD_PHYSMAP_START=3D0xfe000000 CONFIG_MTD_PHYSMAP_LEN=3D0x1000000 CONFIG_MTD_PHYSMAP_BANKWIDTH=3D2 # CONFIG_MTD_PHYSMAP_OF is not set # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # # CONFIG_MTD_PMC551 is not set CONFIG_MTD_SLRAM=3Dy # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set # CONFIG_MTD_BLOCK2MTD is not set # # Disk-On-Chip Device Drivers # # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set # # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=3Dy # CONFIG_PARPORT is not set CONFIG_BLK_DEV=3Dy # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=3Dy CONFIG_BLK_DEV_RAM_COUNT=3D2 CONFIG_BLK_DEV_RAM_SIZE=3D8192 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=3Dy # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set CONFIG_HAVE_IDE=3Dy # CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=3Dy CONFIG_SCSI_DMA=3Dy # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=3Dy # # SCSI support type (disk, tape, CD-ROM) # # CONFIG_BLK_DEV_SD is not set # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=3Dm # # SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=3Dy # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=3Dy # CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=3Dy # # MII PHY device drivers # CONFIG_MARVELL_PHY=3Dy # CONFIG_DAVICOM_PHY is not set # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set # CONFIG_CICADA_PHY is not set # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=3Dy CONFIG_MII=3Dy # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=3Dy # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set # CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=3Dy CONFIG_GFAR_NAPI=3Dy # CONFIG_UCC_GETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set CONFIG_NETDEV_10000=3Dy # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set # CONFIG_TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=3Dy # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=3Dy CONFIG_SERIAL_8250_CONSOLE=3Dy CONFIG_SERIAL_8250_PCI=3Dy CONFIG_SERIAL_8250_NR_UARTS=3D4 CONFIG_SERIAL_8250_RUNTIME_UARTS=3D4 # CONFIG_SERIAL_8250_EXTENDED is not set CONFIG_SERIAL_8250_SHARE_IRQ=3Dy # # Non-8250 serial port support # # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=3Dy CONFIG_SERIAL_CORE_CONSOLE=3Dy # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=3Dy CONFIG_LEGACY_PTYS=3Dy CONFIG_LEGACY_PTY_COUNT=3D256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=3Dy # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=3Dy CONFIG_I2C=3Dy CONFIG_I2C_BOARDINFO=3Dy CONFIG_I2C_CHARDEV=3Dy # # I2C Algorithms # # CONFIG_I2C_ALGOBIT is not set # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_IBM_OF is not set CONFIG_I2C_MPC=3Dy # CONFIG_I2C_MPC8260 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # # Miscellaneous I2C Chip support # # CONFIG_SENSORS_24C01A is not set # CONFIG_SENSORS_AD7416 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_MAX6900 is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # # SPI support # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=3Dy # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_FM75 is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1115 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=3Dy # CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers # # CONFIG_WD is not set # CONFIG_SOFT_WATCHDOG is not set # CONFIG_BOOKE_WDT is not set # # PCI-based Watchdog Cards # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set # # Sonics Silicon Backplane # CONFIG_SSB_POSSIBLE=3Dy # CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set CONFIG_DAB=3Dy # # Graphics support # # CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=3Dm # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=3Dy CONFIG_HID=3Dy # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set CONFIG_USB_SUPPORT=3Dy CONFIG_USB_ARCH_HAS_HCD=3Dy CONFIG_USB_ARCH_HAS_OHCI=3Dy CONFIG_USB_ARCH_HAS_EHCI=3Dy # CONFIG_USB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=3Dy CONFIG_RTC_CLASS=3Dy CONFIG_RTC_HCTOSYS=3Dy CONFIG_RTC_HCTOSYS_DEVICE=3D"rtc0" # CONFIG_RTC_DEBUG is not set # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=3Dy CONFIG_RTC_INTF_PROC=3Dy CONFIG_RTC_INTF_DEV=3Dy # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set CONFIG_RTC_DRV_DS1374=3Dy # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # # SPI RTC drivers # # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set # # Userspace I/O # # CONFIG_UIO is not set # # File systems # CONFIG_EXT2_FS=3Dy # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # # CONFIG_MSDOS_FS is not set # CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=3Dy CONFIG_PROC_KCORE=3Dy CONFIG_PROC_SYSCTL=3Dy CONFIG_SYSFS=3Dy CONFIG_TMPFS=3Dy # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_YAFFS_FS is not set CONFIG_JFFS2_FS=3Dy CONFIG_JFFS2_FS_DEBUG=3D0 CONFIG_JFFS2_FS_WRITEBUFFER=3Dy # CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set CONFIG_JFFS2_COMPRESSION_OPTIONS=3Dy CONFIG_JFFS2_ZLIB=3Dy # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=3Dy # CONFIG_JFFS2_RUBIN is not set # CONFIG_JFFS2_CMODE_NONE is not set CONFIG_JFFS2_CMODE_PRIORITY=3Dy # CONFIG_JFFS2_CMODE_SIZE is not set # CONFIG_JFFS2_CMODE_FAVOURLZO is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=3Dy # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=3Dy CONFIG_NFS_FS=3Dy CONFIG_NFS_V3=3Dy # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=3Dy # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=3Dy CONFIG_LOCKD=3Dy CONFIG_LOCKD_V4=3Dy CONFIG_NFS_COMMON=3Dy CONFIG_SUNRPC=3Dy CONFIG_SUNRPC_GSS=3Dy # CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=3Dy # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=3Dy # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set # CONFIG_MSDOS_PARTITION is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set # # Library routines # CONFIG_BITREVERSE=3Dy # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=3Dy # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=3Dy CONFIG_ZLIB_DEFLATE=3Dy CONFIG_PLIST=3Dy CONFIG_HAS_IOMEM=3Dy CONFIG_HAS_IOPORT=3Dy CONFIG_HAS_DMA=3Dy # # Kernel hacking # # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=3Dy CONFIG_ENABLE_MUST_CHECK=3Dy # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=3Dy # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=3Dy CONFIG_SCHED_DEBUG=3Dy # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_DEBUGGER=3Dy # CONFIG_XMON is not set # CONFIG_BDI_SWITCH is not set CONFIG_PPC_EARLY_DEBUG=3Dy # CONFIG_PPC_EARLY_DEBUG_LPAR is not set # CONFIG_PPC_EARLY_DEBUG_G5 is not set # CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set # CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set # CONFIG_PPC_EARLY_DEBUG_MAPLE is not set # CONFIG_PPC_EARLY_DEBUG_ISERIES is not set # CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set # CONFIG_PPC_EARLY_DEBUG_BEAT is not set # CONFIG_PPC_EARLY_DEBUG_44x is not set # CONFIG_PPC_EARLY_DEBUG_40x is not set # CONFIG_PPC_EARLY_DEBUG_CPM is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=3Dy CONFIG_CRYPTO_ALGAPI=3Dy CONFIG_CRYPTO_BLKCIPHER=3Dy # CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=3Dy # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=3Dy # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_ECB=3Dm CONFIG_CRYPTO_CBC=3Dy CONFIG_CRYPTO_PCBC=3Dm # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=3Dy # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_AES is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=3Dy # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=3Dy But now I face this problem ## Checking Image at 02000100 ... Image Name: Linux-2.6.25.5 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1354578 Bytes =3D 1.3 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Booting image at 02000100 ... Image Name: Linux-2.6.25.5 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1354578 Bytes =3D 1.3 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Loading RAMDisk Image at 02200100 ... Image Name: initrd Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 3658110 Bytes =3D 3.5 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Booting using the fdt at 0x21f0100 Loading Ramdisk to 00482000, end 007ff17e ... OK Loading Device Tree to 007fa000, end 007fcfff ... OK Using MPC85xx MDS machine description Memory CAM mapping: CAM0=3D16Mb, CAM1=3D16Mb, CAM2=3D16Mb residual: 15Mb Linux version 2.6.25.5 (ity10223@aqlbl05x) (gcc version 4.2.2) #1 Mon = Sep 1 10:44:44 CEST 2008 Found initrd at 0xc0482000:0xc07ff17e Found legacy serial port 0 for /soc8568@e0000000/serial@4500 mem=3De0004500, taddr=3De0004500, irq=3D0, clk=3D528000000, speed=3D0 Found legacy serial port 1 for /soc8568@e0000000/serial@4600 mem=3De0004600, taddr=3De0004600, irq=3D0, clk=3D528000000, speed=3D0 console [udbg0] enabled Entering add_active_range(0, 0, 12288) 0 entries of 256 used setup_arch: bootmem mpc85xx_mds_setup_arch() Found FSL PCI host bridge at 0x00000000e0008000. Firmware bus number: = 0->0 PCI host bridge /soc8568@e0000000/pci@8000 (primary) ranges: Found FSL PCI host bridge at 0x00000000e000a000. Firmware bus number: = 0->0 PCI host bridge /soc8568@e0000000/pcie@a000 ranges: arch: exit Top of RAM: 0x3000000, Total RAM: 0x3000000 Memory hole size: 0MB Zone PFN ranges: DMA 0 -> 12288 Normal 12288 -> 12288 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 12288 On node 0 totalpages: 12288 DMA zone: 96 pages used for memmap DMA zone: 0 pages reserved DMA zone: 12192 pages, LIFO batch:1 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Built 1 zonelists in Zone order, mobility grouping on. Total pages: = 12192 Kernel command line: = mtdparts=3Dphysmap-flash.0:1M(boot),7M(aps0),7M(aps1),1M(optusr) = console=3DttyS0,115200 root=3D/dev/ram ramdisk_size=3D500000 rw = ip=3D192.168.0.1 26:192.168.0.33:192.168.1.1:255.255.255.0:MPC8568MDS:eth0:off panic=3D1 = mem=3D0x3f00000 aps=3D0 mpic: Setting up MPIC " OpenPIC " version 1.2 at e0040000, max 1 CPUs mpic: ISU size: 80, shift: 7, mask: 7f mpic: Initializing for 80 sources PID hash table entries: 256 (order: 8, 1024 bytes) time_init: decrementer frequency =3D 66.000000 MHz time_init: processor frequency =3D 1320.000000 MHz clocksource: timebase mult[3c9b26d] shift[22] registered clockevent: decrementer mult[10e5] shift[16] cpu[0] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 42164k/49152k available (2700k kernel code, 6968k reserved, 104k = data, 100k bss, 144k init) SLUB: Genslabs=3D12, HWalign=3D32, Order=3D0-1, MinObjects=3D4, = CPUs=3D1, Nodes=3D1 Calibrating delay loop... 131.58 BogoMIPS (lpj=3D263168) Mount-cache hash table entries: 512 net_namespace: 152 bytes NET: Registered protocol family 16 PCI: Probing PCI hardware Memory resource not set for host bridge 0 PCI: 0001:01:00.0: class b20 doesn't match header type 01. Ignoring = class. Memory resource not set for host bridge 1 PCI: Closing bogus Apple Firmware region 1 on bus 0x02 PCI: Closing bogus Apple Firmware region 2 on bus 0x02 PCI: Bridge: 0001:01:00.0 IO window: 0000-ffffffff MEM window: 0x00000000-0xffffffff PREFETCH window: disabled. PCI: Enabling device 0001:01:00.0 (0106 -> 0107) Registering qe_ic with sysfs... SCSI subsystem initialized NET: Registered protocol family 2 Switched to high resolution mode on CPU 0 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered checking if image is initramfs...it isn't (no cpio magic); looks like an = initrd Freeing initrd memory: 3572k freed JFFS2 version 2.2. (NAND) =C2=A9 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250.0: ttyS0 at MMIO 0xe0004500 (irq =3D 42) is a 16550A console = handover: boot [udbg0] -> real [ttyS0] serial8250.0: ttyS1 at MMIO 0xe0004600 (irq =3D 42) is a 16550A brd: module loaded Gianfar MII Bus: probed eth0: Gianfar Ethernet Controller Version 1.2, 00:e0:0c:00:00:fd eth0: Running with NAPI enabled eth0: 256/256 RX/TX BD ring size eth1: Gianfar Ethernet Controller Version 1.2, 00:e0:0c:00:01:fd eth1: Running with NAPI enabled eth1: 256/256 RX/TX BD ring size physmap platform flash device: 01000000 at fe000000 physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank NOR chip too large to fit in mapping. Attempting to cope... Support for command set 0002 not present gen_probe: No supported Vendor Command Set found physmap-flash physmap-flash.0: map_probe failed slram: not enough parameters. i2c /dev entries driver rtc-ds1374 0-0068: rtc core: registered rtc-ds1374 as rtc0 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. rtc-ds1374 0-0068: setting system clock to 1970-07-21 19:03:21 UTC = (17435001) IP-Config: Gateway not on directly connected network. RAMDISK: Compressed image found at block 0 invalid compressed format (err=3D1) VFS: Mounted root (ext2 filesystem). Freeing unused kernel memory: 144k init attempt to access beyond end of device ram0: rw=3D0, want=3D954898082, limit=3D1000000 Buffer I/O error on device ram0, logical block 2624932688 attempt to access beyond end of device ram0: rw=3D0, want=3D1345772050, limit=3D1000000 Buffer I/O error on device ram0, logical block 672886024 attempt to access beyond end of device ram0: rw=3D0, want=3D3628727914, limit=3D1000000 Buffer I/O error on device ram0, logical block 1814363956 attempt to access beyond end of device ram0: rw=3D0, want=3D3401505000, limit=3D1000000 Buffer I/O error on device ram0, logical block 1700752499 attempt to access beyond end of device ram0: rw=3D0, want=3D954898082, limit=3D1000000 Buffer I/O error on device ram0, logical block 2624932688 attempt to access beyond end of device ram0: rw=3D0, want=3D1345772050, limit=3D1000000 Buffer I/O error on device ram0, logical block 672886024 attempt to access beyond end of device ram0: rw=3D0, want=3D3628727914, limit=3D1000000 Buffer I/O error on device ram0, logical block 1814363956 attempt to access beyond end of device ram0: rw=3D0, want=3D3401505000, limit=3D1000000 Buffer I/O error on device ram0, logical block 1700752499 attempt to access beyond end of device ram0: rw=3D0, want=3D954898082, limit=3D1000000 Buffer I/O error on device ram0, logical block 2624932688 attempt to access beyond end of device ram0: rw=3D0, want=3D1345772050, limit=3D1000000 Buffer I/O error on device ram0, logical block 672886024 attempt to access beyond end of device ram0: rw=3D0, want=3D3628727914, limit=3D1000000 attempt to access beyond end of device ram0: rw=3D0, want=3D3401505000, limit=3D1000000 attempt to access beyond end of device ram0: rw=3D0, want=3D954898082, limit=3D1000000 attempt to access beyond end of device ram0: rw=3D0, want=3D1345772050, limit=3D1000000 attempt to access beyond end of device ram0: rw=3D0, want=3D3628727914, limit=3D1000000 attempt to access beyond end of device ram0: rw=3D0, want=3D3401505000, limit=3D1000000 attempt to access beyond end of device ram0: rw=3D0, want=3D954898082, limit=3D1000000 attempt to access beyond end of device ram0: rw=3D0, want=3D1345772050, limit=3D1000000 attempt to access beyond end of device ram0: rw=3D0, want=3D3628727914, limit=3D1000000 attempt to access beyond end of device ram0: rw=3D0, want=3D3401505000, limit=3D1000000 attempt to access beyond end of device ram0: rw=3D0, want=3D954898082, limit=3D1000000 attempt to access beyond end of device ram0: rw=3D0, want=3D1345772050, limit=3D1000000 attempt to access beyond end of device ram0: rw=3D0, want=3D3628727914, limit=3D1000000 attempt to access beyond end of device ram0: rw=3D0, want=3D3401505000, limit=3D1000000 attempt to access beyond end of device ram0: rw=3D0, want=3D954898082, limit=3D1000000 attempt to access beyond end of device ram0: rw=3D0, want=3D1345772050, limit=3D1000000 attempt to access beyond end of device ram0: rw=3D0, want=3D3628727914, limit=3D1000000 attempt to access beyond end of device Do you have any idea? Thanks Bye Agostino > -----Original Message----- > From: Anatolij Gustschin [mailto:agust@denx.de]=20 > Sent: venerd=EC 29 agosto 2008 23.45 > To: SETTE AGOSTINO - technolabs > Cc: linuxppc-embedded@ozlabs.org > Subject: Re: MPC8568MDS RAMDISK Problem >=20 > SETTE AGOSTINO - technolabs wrote: > > Hi all, > >=20 > > I am trying to port a RAMDISK Filesystem on the MPC8568MDS=20 > board but I > > have the following problem: >=20 > <snip> >=20 > > # > > # General setup > > # > > CONFIG_EXPERIMENTAL=3Dy > > CONFIG_BROKEN_ON_SMP=3Dy > > CONFIG_INIT_ENV_ARG_LIMIT=3D32 > > CONFIG_LOCALVERSION=3D"" > > CONFIG_LOCALVERSION_AUTO=3Dy > > CONFIG_SWAP=3Dy > > CONFIG_SYSVIPC=3Dy > > CONFIG_SYSVIPC_SYSCTL=3Dy > > # CONFIG_POSIX_MQUEUE is not set > > # CONFIG_BSD_PROCESS_ACCT is not set > > # CONFIG_TASKSTATS is not set > > # CONFIG_AUDIT is not set > > # CONFIG_IKCONFIG is not set > > CONFIG_LOG_BUF_SHIFT=3D14 > > # CONFIG_CGROUPS is not set > > CONFIG_GROUP_SCHED=3Dy > > # CONFIG_FAIR_GROUP_SCHED is not set > > # CONFIG_RT_GROUP_SCHED is not set > > CONFIG_USER_SCHED=3Dy > > # CONFIG_CGROUP_SCHED is not set > > CONFIG_SYSFS_DEPRECATED=3Dy > > CONFIG_SYSFS_DEPRECATED_V2=3Dy > > # CONFIG_RELAY is not set > > # CONFIG_NAMESPACES is not set > > # CONFIG_BLK_DEV_INITRD is not set > ------------------>^^^^^^^^^^^^^^^^^ > Your kernel doesn't include RAM disk support. > Enable "Initial RAM filesystem and RAM disk" and > try again. >=20 > Best regards, > Anatolij >=20 >=20 ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: MPC8568MDS RAMDISK Problem 2008-09-01 9:02 ` SETTE AGOSTINO - technolabs @ 2008-09-02 10:10 ` Anatolij Gustschin 2008-09-02 13:18 ` SETTE AGOSTINO - technolabs 0 siblings, 1 reply; 11+ messages in thread From: Anatolij Gustschin @ 2008-09-02 10:10 UTC (permalink / raw) To: SETTE AGOSTINO - technolabs; +Cc: linuxppc-embedded Hi Agostino, SETTE AGOSTINO - technolabs wrote: > First of all thanks for your help. I modified the mpc8568mds_defconfig > >>> cat kernel/linux/arch/powerpc/configs/mpc8568mds_defconfig > # <snip> > > But now I face this problem > > ## Checking Image at 02000100 ... > Image Name: Linux-2.6.25.5 > Image Type: PowerPC Linux Kernel Image (gzip compressed) > Data Size: 1354578 Bytes = 1.3 MB > Load Address: 00000000 > Entry Point: 00000000 > Verifying Checksum ... OK > ## Booting image at 02000100 ... > Image Name: Linux-2.6.25.5 > Image Type: PowerPC Linux Kernel Image (gzip compressed) > Data Size: 1354578 Bytes = 1.3 MB > Load Address: 00000000 > Entry Point: 00000000 > Verifying Checksum ... OK > Uncompressing Kernel Image ... OK > ## Loading RAMDisk Image at 02200100 ... > Image Name: initrd > Image Type: PowerPC Linux RAMDisk Image (gzip compressed) > Data Size: 3658110 Bytes = 3.5 MB > Load Address: 00000000 > Entry Point: 00000000 > Verifying Checksum ... OK > Booting using the fdt at 0x21f0100 > Loading Ramdisk to 00482000, end 007ff17e ... OK > Loading Device Tree to 007fa000, end 007fcfff ... OK Ramdisk image is partially overwritten while loading the Device Tree: Ramdisk ends at 0x007ff17e, Device Tree starts at 0x007fa000. You probably need to update U-Boot to recent version to solve this issue. > Using MPC85xx MDS machine description > Memory CAM mapping: CAM0=16Mb, CAM1=16Mb, CAM2=16Mb residual: 15Mb > Linux version 2.6.25.5 (ity10223@aqlbl05x) (gcc version 4.2.2) #1 Mon Sep 1 10:44:44 CEST 2008 > Found initrd at 0xc0482000:0xc07ff17e <snip> > RAMDISK: Compressed image found at block 0 > invalid compressed format (err=1) Ramdisk decompression failed, it's expected as ramdisk was overwritten by DTB while booting. Try to update U-Boot to v1.3.4. Best regards, Anatolij -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de ^ permalink raw reply [flat|nested] 11+ messages in thread
* RE: MPC8568MDS RAMDISK Problem 2008-09-02 10:10 ` Anatolij Gustschin @ 2008-09-02 13:18 ` SETTE AGOSTINO - technolabs 2008-09-02 21:27 ` Anatolij Gustschin 0 siblings, 1 reply; 11+ messages in thread From: SETTE AGOSTINO - technolabs @ 2008-09-02 13:18 UTC (permalink / raw) To: Anatolij Gustschin; +Cc: linuxppc-embedded Hi Anatolij, I updated my u-boot U-Boot 1.3.4-00253-g33aa4ea (Sep 2 2008 - 13:04:22) CPU: 8568E, Version: 1.1, (0x807d0011) Core: E500, Version: 2.2, (0x80210022) Clock Configuration: CPU:1320 MHz, CCB: 528 MHz, DDR: 264 MHz (528 MT/s data rate), LBC: 132 MHz L1: D-cache 32 kB enabled I-cache 32 kB enabled Board: 8568 MDS I2C: ready DRAM: Initializing SDRAM: 64 MB DDR: 512 MB FLASH: 32 MB L2: 512 KB enabled PCI: 32 bit, 66 MHz, async, host, arbiter Scanning PCI bus 00 PCI on bus 00 - 00 PCIE connected to slot as Root Complex (base address e000a000) PCIE on bus 01 - 01 In: serial Out: serial Err: serial Net: eTSEC0, eTSEC1, FSL UEC0, FSL UEC1 But now I have the following problem: ## Checking Image at 02000100 ... Legacy image found Image Name: Linux-2.6.25.5 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1354587 Bytes =3D 1.3 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Booting kernel from Legacy Image at 02000100 ... Image Name: Linux-2.6.25.5 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1354587 Bytes =3D 1.3 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 02200100 ... Image Name: initrd Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 3658157 Bytes =3D 3.5 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 021f0100 Booting using the fdt blob at 0x21f0100 Uncompressing Kernel Image ... OK Loading Device Tree to 007fa000, end 007fffff ... OK WARNING: could not set linux,stdout-path FDT_ERR_NOTFOUND. ERROR: /chosen node create failed - must RESET the board to recover. Do I need to add some environment variables or set some fdt commands = before booting the board? Here are the env variables =3D> printenv ramboot=3Drun ramargs;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr = $bootfile;bootm $loadaddr $ramdiskaddr nfsboot=3Drun nfsargs;tftp $loadaddr $bootfile;tftp $fdtaddr = $fdtfile;bootm $loadaddr - $fdtaddr bootdelay=3D10 baudrate=3D115200 loads_echo=3D1 ethaddr=3D00:E0:0C:00:00:FD eth1addr=3D00:E0:0C:00:01:FD eth2addr=3D00:E0:0C:00:02:FD eth3addr=3D00:E0:0C:00:03:FD rootpath=3D/nfsroot gatewayip=3D192.168.1.1 netmask=3D255.255.255.0 bootfile=3Dyour.uImage netdev=3Deth0 consoledev=3DttyS0 ramdiskaddr=3D600000 ramdiskfile=3Dyour.ramdisk.u-boot fdtaddr=3D400000 fdtfile=3Dyour.fdt.dtb nfsargs=3Dsetenv bootargs root=3D/dev/nfs rw = nfsroot=3D$serverip:$rootpath = ip=3D$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off = console=3D$consoledev,$bau drate $othbootargs ramargs=3Dsetenv bootargs root=3D/dev/ram rw = console=3D$consoledev,$baudrate $othbootargs ethact=3DeTSEC0 serverip=3D192.168.0.33 ipaddr=3D192.168.0.126 bootcmdFREE=3Drun ramargs;cp.b fff00000 400000 3500;bootm ff800000 = ffa00000 400000 myaps=3DMPC8568MDS/aps mtdargs=3Dmtdparts=3Dphysmap-flash.0:1M(boot),7M(aps0),7M(aps1),1M(optusr= ) pram=3D0x100000 mem=3D0x3f00000 pram_start=3D0x3f00000 loadaddr=3D0x2000000 aps0_fl_start=3D0xfe100000 aps0_fl_size=3D0x00700000 aps1_fl_start=3D0xfe800000 aps1_fl_end=3D0xfeefffff aps1_fl_size=3D0x00700000 aps_ram_start=3D0x2000000 aps_ram_kernel_start=3D0x2000100 aps_ram_dtb_start=3D0x21f0100 aps_ram_rootfs_start=3D0x2200100 aps=3D0 dl_boot=3Dtftp ${aps_ram_start} "u-boot.bin" && protect off 0xfe000000 = 0xfe07ffff && cp.b ${aps_ram_start} 0xfe000000 ${filesize} && protect on = 0xfe000000 0xf e07ffff && saveenv bootcmd=3Dif itest ${aps} =3D=3D 0; then run dl_ram0; else run = dl_ram1;fi altbootcmd=3Dmw.b ${pram_start} 0 ${pram} && if itest ${aps} =3D=3D 0; = then setenv aps 1; else setenv aps 0; fi; saveenv; run bootcmd dl_ram0=3Dcp.b ${aps0_fl_start} ${aps_ram_start} ${aps0_fl_size};if imi = ${aps_ram_kernel_start}; then run bargs;bootm ${aps_ram_kernel_start} = ${aps_ram_rootfs _start} ${aps_ram_dtb_start}; else reset; fi dl_ram1=3Dcp.b ${aps1_fl_start} ${aps_ram_start} ${aps1_fl_size};if imi = ${aps_ram_kernel_start}; then run bargs;bootm ${aps_ram_kernel_start} = ${aps_ram_rootfs _start} ${aps_ram_dtb_start}; else reset; fi bootlimit=3D5 initrd_high=3Dno hostname=3DMPC8568MDS aps0_fl_end=3D0xfe7fffff dl_aps0=3Dtftp ${aps_ram_start} ${myaps};erase ${aps0_fl_start} = ${aps0_fl_end};cp.b ${aps_ram_start} ${aps0_fl_start} ${filesize};boot dl_aps1=3Dtftp ${aps_ram_start} ${myaps};erase ${aps1_fl_start} = ${aps1_fl_end};cp.b ${aps_ram_start} ${aps1_fl_start} ${filesize};boot bargs=3Dsetenv bootargs ${mtdargs} console=3DttyS0,$baudrate = root=3D/dev/ram ramdisk_size=3D500000 rw = ip=3D${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:e th0:off panic=3D1 mem=3D${mem} aps=3D${aps} ${misc} ${slram} dl_mykernel=3Dtftp 1000000 MPC8568MDS/uImage; erase ff800000 ff9fffff; = cp.b 1000000 ff800000 ${filesize} dl_myrootfs=3Dtftp 2000000 MPC8568MDS/RamDisk.ext2; erase ffa00000 = ffefffff; cp.b 2000000 ffa00000 ${filesize} dl_mydtb=3Dtftp 400000 MPC8568MDS/mpc8568mds.dtb; erase fff00000 = fff7ffff; cp.b 400000 fff00000 ${filesize} fdt_file=3DMPC8568MDS/mpc8568mds.dtb fdt_addr_r=3D0x21f0100 stdin=3Dserial stdout=3Dserial stderr=3Dserial With previous u-boot I was able to load the images separately, with this = u-boot I have the error. Best Regards Agostino > -----Original Message----- > From: Anatolij Gustschin [mailto:agust@denx.de]=20 > Sent: marted=EC 2 settembre 2008 12.11 > To: SETTE AGOSTINO - technolabs > Cc: linuxppc-embedded@ozlabs.org > Subject: Re: MPC8568MDS RAMDISK Problem >=20 > Hi Agostino, >=20 > SETTE AGOSTINO - technolabs wrote: >=20 > > First of all thanks for your help. I modified the=20 > mpc8568mds_defconfig > >=20 > >>> cat kernel/linux/arch/powerpc/configs/mpc8568mds_defconfig > > # >=20 > <snip> >=20 > >=20 > > But now I face this problem > >=20 > > ## Checking Image at 02000100 ... > > Image Name: Linux-2.6.25.5 > > Image Type: PowerPC Linux Kernel Image (gzip compressed) > > Data Size: 1354578 Bytes =3D 1.3 MB > > Load Address: 00000000 > > Entry Point: 00000000 > > Verifying Checksum ... OK > > ## Booting image at 02000100 ... > > Image Name: Linux-2.6.25.5 > > Image Type: PowerPC Linux Kernel Image (gzip compressed) > > Data Size: 1354578 Bytes =3D 1.3 MB > > Load Address: 00000000 > > Entry Point: 00000000 > > Verifying Checksum ... OK > > Uncompressing Kernel Image ... OK > > ## Loading RAMDisk Image at 02200100 ... > > Image Name: initrd > > Image Type: PowerPC Linux RAMDisk Image (gzip compressed) > > Data Size: 3658110 Bytes =3D 3.5 MB > > Load Address: 00000000 > > Entry Point: 00000000 > > Verifying Checksum ... OK > > Booting using the fdt at 0x21f0100 > > Loading Ramdisk to 00482000, end 007ff17e ... OK > > Loading Device Tree to 007fa000, end 007fcfff ... OK >=20 > Ramdisk image is partially overwritten while loading the > Device Tree: Ramdisk ends at 0x007ff17e, Device Tree starts > at 0x007fa000. You probably need to update U-Boot to recent > version to solve this issue. >=20 > > Using MPC85xx MDS machine description > > Memory CAM mapping: CAM0=3D16Mb, CAM1=3D16Mb, CAM2=3D16Mb residual: = 15Mb > > Linux version 2.6.25.5 (ity10223@aqlbl05x) (gcc version=20 > 4.2.2) #1 Mon Sep 1 10:44:44 CEST 2008 > > Found initrd at 0xc0482000:0xc07ff17e >=20 > <snip> >=20 > > RAMDISK: Compressed image found at block 0 > > invalid compressed format (err=3D1) >=20 > Ramdisk decompression failed, it's expected as ramdisk was > overwritten by DTB while booting. >=20 > Try to update U-Boot to v1.3.4. >=20 > Best regards, > Anatolij >=20 > --=20 > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de >=20 ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: MPC8568MDS RAMDISK Problem 2008-09-02 13:18 ` SETTE AGOSTINO - technolabs @ 2008-09-02 21:27 ` Anatolij Gustschin 2008-09-03 9:30 ` SETTE AGOSTINO - technolabs 0 siblings, 1 reply; 11+ messages in thread From: Anatolij Gustschin @ 2008-09-02 21:27 UTC (permalink / raw) To: SETTE AGOSTINO - technolabs; +Cc: linuxppc-embedded Hi Agostino, SETTE AGOSTINO - technolabs wrote: > I updated my u-boot > > U-Boot 1.3.4-00253-g33aa4ea (Sep 2 2008 - 13:04:22) > > CPU: 8568E, Version: 1.1, (0x807d0011) > Core: E500, Version: 2.2, (0x80210022) > Clock Configuration: > CPU:1320 MHz, CCB: 528 MHz, > DDR: 264 MHz (528 MT/s data rate), LBC: 132 MHz > L1: D-cache 32 kB enabled > I-cache 32 kB enabled > Board: 8568 MDS > I2C: ready > DRAM: Initializing > SDRAM: 64 MB > DDR: 512 MB > FLASH: 32 MB > L2: 512 KB enabled > PCI: 32 bit, 66 MHz, async, host, arbiter > Scanning PCI bus 00 > PCI on bus 00 - 00 > > PCIE connected to slot as Root Complex (base address e000a000) > PCIE on bus 01 - 01 > In: serial > Out: serial > Err: serial > Net: eTSEC0, eTSEC1, FSL UEC0, FSL UEC1 > > But now I have the following problem: > > ## Checking Image at 02000100 ... > Legacy image found > Image Name: Linux-2.6.25.5 > Image Type: PowerPC Linux Kernel Image (gzip compressed) > Data Size: 1354587 Bytes = 1.3 MB > Load Address: 00000000 > Entry Point: 00000000 > Verifying Checksum ... OK > ## Booting kernel from Legacy Image at 02000100 ... > Image Name: Linux-2.6.25.5 > Image Type: PowerPC Linux Kernel Image (gzip compressed) > Data Size: 1354587 Bytes = 1.3 MB > Load Address: 00000000 > Entry Point: 00000000 > Verifying Checksum ... OK > ## Loading init Ramdisk from Legacy Image at 02200100 ... > Image Name: initrd > Image Type: PowerPC Linux RAMDisk Image (gzip compressed) > Data Size: 3658157 Bytes = 3.5 MB > Load Address: 00000000 > Entry Point: 00000000 > Verifying Checksum ... OK > ## Flattened Device Tree blob at 021f0100 > Booting using the fdt blob at 0x21f0100 > Uncompressing Kernel Image ... OK > Loading Device Tree to 007fa000, end 007fffff ... OK > WARNING: could not set linux,stdout-path FDT_ERR_NOTFOUND. > ERROR: /chosen node create failed - must RESET the board to recover. Does your "arch/powerpc/boot/dts/mpc8568mds.dts" file contain aliases node with "serial0 = &serial0;" in it? How do you compile your mpc8568mds.dtb DTB and which dtc version are you using to compile it? > Do I need to add some environment variables or set some fdt commands before booting the board? The mpc8568mds.dts from 2.6.25.5 kernel seems to be Ok. Booting should work if you use this mpc8568mds.dts file. The problem could also be somewhere in U-Boot environment setup. > Here are the env variables > > => printenv > ramboot=run ramargs;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;bootm $loadaddr $ramdiskaddr > nfsboot=run nfsargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr > bootdelay=10 > baudrate=115200 > loads_echo=1 > ethaddr=00:E0:0C:00:00:FD > eth1addr=00:E0:0C:00:01:FD > eth2addr=00:E0:0C:00:02:FD > eth3addr=00:E0:0C:00:03:FD > rootpath=/nfsroot > gatewayip=192.168.1.1 > netmask=255.255.255.0 > bootfile=your.uImage > netdev=eth0 > consoledev=ttyS0 > ramdiskaddr=600000 > ramdiskfile=your.ramdisk.u-boot > fdtaddr=400000 > fdtfile=your.fdt.dtb > nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off console=$consoledev,$bau > drate $othbootargs > ramargs=setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs > ethact=eTSEC0 > serverip=192.168.0.33 > ipaddr=192.168.0.126 > bootcmdFREE=run ramargs;cp.b fff00000 400000 3500;bootm ff800000 ffa00000 400000 > myaps=MPC8568MDS/aps > mtdargs=mtdparts=physmap-flash.0:1M(boot),7M(aps0),7M(aps1),1M(optusr) > pram=0x100000 > mem=0x3f00000 > pram_start=0x3f00000 > loadaddr=0x2000000 > aps0_fl_start=0xfe100000 > aps0_fl_size=0x00700000 > aps1_fl_start=0xfe800000 > aps1_fl_end=0xfeefffff > aps1_fl_size=0x00700000 > aps_ram_start=0x2000000 > aps_ram_kernel_start=0x2000100 > aps_ram_dtb_start=0x21f0100 > aps_ram_rootfs_start=0x2200100 > aps=0 > dl_boot=tftp ${aps_ram_start} "u-boot.bin" && protect off 0xfe000000 0xfe07ffff && cp.b ${aps_ram_start} 0xfe000000 ${filesize} && protect on 0xfe000000 0xf > e07ffff && saveenv > bootcmd=if itest ${aps} == 0; then run dl_ram0; else run dl_ram1;fi > altbootcmd=mw.b ${pram_start} 0 ${pram} && if itest ${aps} == 0; then setenv aps 1; else setenv aps 0; fi; saveenv; run bootcmd > dl_ram0=cp.b ${aps0_fl_start} ${aps_ram_start} ${aps0_fl_size};if imi ${aps_ram_kernel_start}; then run bargs;bootm ${aps_ram_kernel_start} ${aps_ram_rootfs > _start} ${aps_ram_dtb_start}; else reset; fi > dl_ram1=cp.b ${aps1_fl_start} ${aps_ram_start} ${aps1_fl_size};if imi ${aps_ram_kernel_start}; then run bargs;bootm ${aps_ram_kernel_start} ${aps_ram_rootfs > _start} ${aps_ram_dtb_start}; else reset; fi > bootlimit=5 > initrd_high=no > hostname=MPC8568MDS > aps0_fl_end=0xfe7fffff > dl_aps0=tftp ${aps_ram_start} ${myaps};erase ${aps0_fl_start} ${aps0_fl_end};cp.b ${aps_ram_start} ${aps0_fl_start} ${filesize};boot > dl_aps1=tftp ${aps_ram_start} ${myaps};erase ${aps1_fl_start} ${aps1_fl_end};cp.b ${aps_ram_start} ${aps1_fl_start} ${filesize};boot > bargs=setenv bootargs ${mtdargs} console=ttyS0,$baudrate root=/dev/ram ramdisk_size=500000 rw ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:e > th0:off panic=1 mem=${mem} aps=${aps} ${misc} ${slram} > dl_mykernel=tftp 1000000 MPC8568MDS/uImage; erase ff800000 ff9fffff; cp.b 1000000 ff800000 ${filesize} > dl_myrootfs=tftp 2000000 MPC8568MDS/RamDisk.ext2; erase ffa00000 ffefffff; cp.b 2000000 ffa00000 ${filesize} > dl_mydtb=tftp 400000 MPC8568MDS/mpc8568mds.dtb; erase fff00000 fff7ffff; cp.b 400000 fff00000 ${filesize} > fdt_file=MPC8568MDS/mpc8568mds.dtb > fdt_addr_r=0x21f0100 > stdin=serial > stdout=serial > stderr=serial > > With previous u-boot I was able to load the images separately, with this u-boot I have the error. What commands do you use to load kernel, ramdisk and dtb files? It is not obvious from the environment above. Best regargs, Anatolij -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de ^ permalink raw reply [flat|nested] 11+ messages in thread
* RE: MPC8568MDS RAMDISK Problem 2008-09-02 21:27 ` Anatolij Gustschin @ 2008-09-03 9:30 ` SETTE AGOSTINO - technolabs 0 siblings, 0 replies; 11+ messages in thread From: SETTE AGOSTINO - technolabs @ 2008-09-03 9:30 UTC (permalink / raw) To: Anatolij Gustschin; +Cc: linuxppc-embedded =20 > -----Original Message----- > From: Anatolij Gustschin [mailto:agust@denx.de]=20 > Sent: marted=EC 2 settembre 2008 23.28 > To: SETTE AGOSTINO - technolabs > Cc: linuxppc-embedded@ozlabs.org > Subject: Re: MPC8568MDS RAMDISK Problem >=20 > Hi Agostino, >=20 > SETTE AGOSTINO - technolabs wrote: >=20 > > I updated my u-boot > >=20 > > U-Boot 1.3.4-00253-g33aa4ea (Sep 2 2008 - 13:04:22) > >=20 > > CPU: 8568E, Version: 1.1, (0x807d0011) > > Core: E500, Version: 2.2, (0x80210022) > > Clock Configuration: > > CPU:1320 MHz, CCB: 528 MHz, > > DDR: 264 MHz (528 MT/s data rate), LBC: 132 MHz > > L1: D-cache 32 kB enabled > > I-cache 32 kB enabled > > Board: 8568 MDS > > I2C: ready > > DRAM: Initializing > > SDRAM: 64 MB > > DDR: 512 MB > > FLASH: 32 MB > > L2: 512 KB enabled > > PCI: 32 bit, 66 MHz, async, host, arbiter > > Scanning PCI bus 00 > > PCI on bus 00 - 00 > >=20 > > PCIE connected to slot as Root Complex (base address e000a000) > > PCIE on bus 01 - 01 > > In: serial > > Out: serial > > Err: serial > > Net: eTSEC0, eTSEC1, FSL UEC0, FSL UEC1 > >=20 > > But now I have the following problem: > >=20 > > ## Checking Image at 02000100 ... > > Legacy image found > > Image Name: Linux-2.6.25.5 > > Image Type: PowerPC Linux Kernel Image (gzip compressed) > > Data Size: 1354587 Bytes =3D 1.3 MB > > Load Address: 00000000 > > Entry Point: 00000000 > > Verifying Checksum ... OK > > ## Booting kernel from Legacy Image at 02000100 ... > > Image Name: Linux-2.6.25.5 > > Image Type: PowerPC Linux Kernel Image (gzip compressed) > > Data Size: 1354587 Bytes =3D 1.3 MB > > Load Address: 00000000 > > Entry Point: 00000000 > > Verifying Checksum ... OK > > ## Loading init Ramdisk from Legacy Image at 02200100 ... > > Image Name: initrd > > Image Type: PowerPC Linux RAMDisk Image (gzip compressed) > > Data Size: 3658157 Bytes =3D 3.5 MB > > Load Address: 00000000 > > Entry Point: 00000000 > > Verifying Checksum ... OK > > ## Flattened Device Tree blob at 021f0100 > > Booting using the fdt blob at 0x21f0100 > > Uncompressing Kernel Image ... OK > > Loading Device Tree to 007fa000, end 007fffff ... OK > > WARNING: could not set linux,stdout-path FDT_ERR_NOTFOUND. > > ERROR: /chosen node create failed - must RESET the board to recover. >=20 > Does your "arch/powerpc/boot/dts/mpc8568mds.dts" file contain > aliases node with "serial0 =3D &serial0;" in it? Yes, it does: aliases { ethernet0 =3D &enet0; ethernet1 =3D &enet1; ethernet2 =3D &enet2; ethernet3 =3D &enet3; serial0 =3D &serial0; serial1 =3D &serial1; pci0 =3D &pci0; pci1 =3D &pci1; }; serial0: serial@4500 { cell-index =3D <0>; device_type =3D "serial"; compatible =3D "ns16550"; reg =3D <4500 100>; clock-frequency =3D <0>; interrupts =3D <2a 2>; interrupt-parent =3D <&mpic>; }; serial1: serial@4600 { cell-index =3D <1>; device_type =3D "serial"; compatible =3D "ns16550"; reg =3D <4600 100>; clock-frequency =3D <0>; interrupts =3D <2a 2>; interrupt-parent =3D <&mpic>; }; > How do you compile your mpc8568mds.dtb DTB and which dtc version > are you using to compile it? ./dtc -o results/mpc8568mds.dtb -O dtb = linux/arch/powerpc/boot/dts/mpc8568mds.dts -S 0x2000 -R 4 Version: DTC 1.0.0-gd6f9b62f > =20 > > Do I need to add some environment variables or set some fdt=20 > commands before booting the board? >=20 > The mpc8568mds.dts from 2.6.25.5 kernel seems to be Ok. Booting > should work if you use this mpc8568mds.dts file. The problem > could also be somewhere in U-Boot environment setup. >=20 > > Here are the env variables > >=20 > > =3D> printenv > > ramboot=3Drun ramargs;tftp $ramdiskaddr $ramdiskfile;tftp=20 > $loadaddr $bootfile;bootm $loadaddr $ramdiskaddr > > nfsboot=3Drun nfsargs;tftp $loadaddr $bootfile;tftp $fdtaddr=20 > $fdtfile;bootm $loadaddr - $fdtaddr > > bootdelay=3D10 > > baudrate=3D115200 > > loads_echo=3D1 > > ethaddr=3D00:E0:0C:00:00:FD > > eth1addr=3D00:E0:0C:00:01:FD > > eth2addr=3D00:E0:0C:00:02:FD > > eth3addr=3D00:E0:0C:00:03:FD > > rootpath=3D/nfsroot > > gatewayip=3D192.168.1.1 > > netmask=3D255.255.255.0 > > bootfile=3Dyour.uImage > > netdev=3Deth0 > > consoledev=3DttyS0 > > ramdiskaddr=3D600000 > > ramdiskfile=3Dyour.ramdisk.u-boot > > fdtaddr=3D400000 > > fdtfile=3Dyour.fdt.dtb > > nfsargs=3Dsetenv bootargs root=3D/dev/nfs rw=20 > nfsroot=3D$serverip:$rootpath=20 > ip=3D$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off > console=3D$consoledev,$bau > > drate $othbootargs > > ramargs=3Dsetenv bootargs root=3D/dev/ram rw=20 > console=3D$consoledev,$baudrate $othbootargs > > ethact=3DeTSEC0 > > serverip=3D192.168.0.33 > > ipaddr=3D192.168.0.126 > > bootcmdFREE=3Drun ramargs;cp.b fff00000 400000 3500;bootm=20 > ff800000 ffa00000 400000 > > myaps=3DMPC8568MDS/aps > >=20 > = mtdargs=3Dmtdparts=3Dphysmap-flash.0:1M(boot),7M(aps0),7M(aps1),1M(optusr= ) > > pram=3D0x100000 > > mem=3D0x3f00000 > > pram_start=3D0x3f00000 > > loadaddr=3D0x2000000 > > aps0_fl_start=3D0xfe100000 > > aps0_fl_size=3D0x00700000 > > aps1_fl_start=3D0xfe800000 > > aps1_fl_end=3D0xfeefffff > > aps1_fl_size=3D0x00700000 > > aps_ram_start=3D0x2000000 > > aps_ram_kernel_start=3D0x2000100 > > aps_ram_dtb_start=3D0x21f0100 > > aps_ram_rootfs_start=3D0x2200100 > > aps=3D0 > > dl_boot=3Dtftp ${aps_ram_start} "u-boot.bin" && protect off=20 > 0xfe000000 0xfe07ffff && cp.b ${aps_ram_start} 0xfe000000=20 > ${filesize} && protect on 0xfe000000 0xf > > e07ffff && saveenv > > bootcmd=3Dif itest ${aps} =3D=3D 0; then run dl_ram0; else run = dl_ram1;fi > > altbootcmd=3Dmw.b ${pram_start} 0 ${pram} && if itest ${aps}=20 > =3D=3D 0; then setenv aps 1; else setenv aps 0; fi; saveenv; run = bootcmd > > dl_ram0=3Dcp.b ${aps0_fl_start} ${aps_ram_start}=20 > ${aps0_fl_size};if imi ${aps_ram_kernel_start}; then run=20 > bargs;bootm ${aps_ram_kernel_start} ${aps_ram_rootfs > > _start} ${aps_ram_dtb_start}; else reset; fi > > dl_ram1=3Dcp.b ${aps1_fl_start} ${aps_ram_start}=20 > ${aps1_fl_size};if imi ${aps_ram_kernel_start}; then run=20 > bargs;bootm ${aps_ram_kernel_start} ${aps_ram_rootfs > > _start} ${aps_ram_dtb_start}; else reset; fi > > bootlimit=3D5 > > initrd_high=3Dno > > hostname=3DMPC8568MDS > > aps0_fl_end=3D0xfe7fffff > > dl_aps0=3Dtftp ${aps_ram_start} ${myaps};erase=20 > ${aps0_fl_start} ${aps0_fl_end};cp.b ${aps_ram_start}=20 > ${aps0_fl_start} ${filesize};boot > > dl_aps1=3Dtftp ${aps_ram_start} ${myaps};erase=20 > ${aps1_fl_start} ${aps1_fl_end};cp.b ${aps_ram_start}=20 > ${aps1_fl_start} ${filesize};boot > > bargs=3Dsetenv bootargs ${mtdargs} console=3DttyS0,$baudrate=20 > root=3D/dev/ram ramdisk_size=3D500000 rw=20 > ip=3D${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:e > > th0:off panic=3D1 mem=3D${mem} aps=3D${aps} ${misc} ${slram} > > dl_mykernel=3Dtftp 1000000 MPC8568MDS/uImage; erase ff800000=20 > ff9fffff; cp.b 1000000 ff800000 ${filesize} > > dl_myrootfs=3Dtftp 2000000 MPC8568MDS/RamDisk.ext2; erase=20 > ffa00000 ffefffff; cp.b 2000000 ffa00000 ${filesize} > > dl_mydtb=3Dtftp 400000 MPC8568MDS/mpc8568mds.dtb; erase=20 > fff00000 fff7ffff; cp.b 400000 fff00000 ${filesize} > > fdt_file=3DMPC8568MDS/mpc8568mds.dtb > > fdt_addr_r=3D0x21f0100 > > stdin=3Dserial > > stdout=3Dserial > > stderr=3Dserial > >=20 > > With previous u-boot I was able to load the images=20 > separately, with this u-boot I have the error. >=20 > What commands do you use to load kernel, ramdisk and dtb files?=20 run dl_aps0 But to load the images separately I do the following run dl_mykernel run dl_myrootfs run dl_mydtb run ramargs bootm ff800000 ffa00000 400000 > It is not obvious from the environment above. >=20 > Best regargs, > Anatolij I am taking a look at the U-Boot files and I made the following = modification (at the moment I am using U-Boot received by Freescale = U-Boot 1.3.0-rc3, quite old) on the file common/cmd.bootm.c diff Mycmd_bootm.c u-boot-1.3.0-rc3/common/cmd_bootm.c 955c955 < of_start =3D (ulong)kbd - of_len; --- > of_start =3D (ulong)kbd - of_len - len; 1017c1017 < of_start =3D (ulong)kbd - of_len - 8192; --- > of_start =3D (ulong)kbd - of_len - len - 8192; I added len to avoid that Ramdisk area is overwritten when loading the = Device Tree. With this modification I am now able to load kernel, rootfs = and dtb correctly and all as one image file Best Regards Agostino >=20 > --=20 > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de >=20 ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2008-09-03 9:31 UTC | newest] Thread overview: 11+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2008-08-28 14:11 GPIO interrupt on AMCC 460EX Felix Radensky 2008-08-28 15:20 ` Stefan Roese 2008-08-28 21:47 ` Felix Radensky 2008-08-29 15:31 ` MPC8568MDS RAMDISK Problem SETTE AGOSTINO - technolabs 2008-08-29 18:03 ` Bhupender Saharan 2008-08-29 21:45 ` Anatolij Gustschin 2008-09-01 9:02 ` SETTE AGOSTINO - technolabs 2008-09-02 10:10 ` Anatolij Gustschin 2008-09-02 13:18 ` SETTE AGOSTINO - technolabs 2008-09-02 21:27 ` Anatolij Gustschin 2008-09-03 9:30 ` SETTE AGOSTINO - technolabs
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).