[PATCH v4 0/2] powerpc: Board support for GE Fanuc SBC610

Martyn Welch
2008-09-01T10:27:58Z

The following series implements basic board support for GE Fanuc's SBC610, a
6U single board computer, based on Freescale's MPC8641D.

This series provides basic functionality:
- The board can boot with a serial console.
- Ethernet works, though the phys are polled.
- The PCI bus is scanned and sata functions.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
---

Kumar: Thanks once again for your comments.

I have altered "reg" variables, inline with suggestions and existing dts files.

I have not removed the cpu *-frequency entires - these are required to be
present for u-boot 1.2.0, which will alter but not create them.

Martyn

arch/powerpc/boot/dts/gef_sbc610.dts | 259 ++++++++++++++++++++++++++++++
arch/powerpc/platforms/86xx/Kconfig | 9 +
arch/powerpc/platforms/86xx/Makefile | 1
arch/powerpc/platforms/86xx/gef_sbc610.c | 152 ++++++++++++++++++
4 files changed, 420 insertions(+), 1 deletions(-)