From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from buildserver.ru.mvista.com (unknown [85.21.88.6]) by ozlabs.org (Postfix) with ESMTP id 54C48DDDF9 for ; Sat, 4 Oct 2008 02:05:48 +1000 (EST) Date: Fri, 3 Oct 2008 20:05:45 +0400 From: Anton Vorontsov To: Timur Tabi Subject: Re: [PATCH] powerpc: make Freescale QE support a selectable Kconfig option Message-ID: <20081003160545.GA29927@oksana.dev.rtsoft.ru> References: <1222961277-6166-1-git-send-email-timur@freescale.com> <20081003070416.GA460@oksana.dev.rtsoft.ru> <20081003084849.GA18271@oksana.dev.rtsoft.ru> <20081003090804.GA29029@oksana.dev.rtsoft.ru> <48E63DB6.8030102@freescale.com> MIME-Version: 1.0 Content-Type: text/plain; charset=windows-1251 In-Reply-To: <48E63DB6.8030102@freescale.com> Cc: linuxppc-dev@ozlabs.org Reply-To: avorontsov@ru.mvista.com List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Fri, Oct 03, 2008 at 10:43:50AM -0500, Timur Tabi wrote: > Anton Vorontsov wrote: > > > Btw, as for the need.. yes, it was needed to support the FHCI. But > > now the FHCI would just depend on it, which is better approach anyway. > > I also noticed that "QE GPIO support" is a top-level Kconfig option, instead of > under Device Drivers -> GPIO. Is that intentional? Yup. David said that platform GPIO controllers should not go into the drivers/gpio/, their place is in the arch/. Thanks, -- Anton Vorontsov email: cbouatmailru@gmail.com irc://irc.freenode.net/bd2