From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Paul Mackerras <paulus@samba.org>
Cc: Milton Miller <miltonm@bga.com>, linuxppc-dev@ozlabs.org
Subject: [PATCH 3/3] powerpc: Remove default kexec/crash_kernel ops assignments
Date: Tue, 16 Dec 2008 19:23:08 +0300 [thread overview]
Message-ID: <20081216162308.GC21749@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20081216162217.GA3885@oksana.dev.rtsoft.ru>
Default ops are implicit now.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
arch/powerpc/platforms/cell/celleb_setup.c | 9 ---------
arch/powerpc/platforms/cell/setup.c | 6 ------
arch/powerpc/platforms/embedded6xx/c2k.c | 6 ------
arch/powerpc/platforms/embedded6xx/prpmc2800.c | 6 ------
arch/powerpc/platforms/maple/setup.c | 6 ------
arch/powerpc/platforms/powermac/setup.c | 6 ------
arch/powerpc/platforms/ps3/setup.c | 4 ----
7 files changed, 0 insertions(+), 43 deletions(-)
diff --git a/arch/powerpc/platforms/cell/celleb_setup.c b/arch/powerpc/platforms/cell/celleb_setup.c
index b11cb30..07c234f 100644
--- a/arch/powerpc/platforms/cell/celleb_setup.c
+++ b/arch/powerpc/platforms/cell/celleb_setup.c
@@ -45,7 +45,6 @@
#include <asm/mmu.h>
#include <asm/processor.h>
#include <asm/io.h>
-#include <asm/kexec.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/cputable.h>
@@ -226,9 +225,6 @@ define_machine(celleb_beat) {
.pci_setup_phb = celleb_setup_phb,
#ifdef CONFIG_KEXEC
.kexec_cpu_down = beat_kexec_cpu_down,
- .machine_kexec = default_machine_kexec,
- .machine_kexec_prepare = default_machine_kexec_prepare,
- .machine_crash_shutdown = default_machine_crash_shutdown,
#endif
};
@@ -248,9 +244,4 @@ define_machine(celleb_native) {
.pci_probe_mode = celleb_pci_probe_mode,
.pci_setup_phb = celleb_setup_phb,
.init_IRQ = celleb_init_IRQ_native,
-#ifdef CONFIG_KEXEC
- .machine_kexec = default_machine_kexec,
- .machine_kexec_prepare = default_machine_kexec_prepare,
- .machine_crash_shutdown = default_machine_crash_shutdown,
-#endif
};
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index ab721b5..5930536 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -35,7 +35,6 @@
#include <asm/mmu.h>
#include <asm/processor.h>
#include <asm/io.h>
-#include <asm/kexec.h>
#include <asm/pgtable.h>
#include <asm/prom.h>
#include <asm/rtas.h>
@@ -289,9 +288,4 @@ define_machine(cell) {
.progress = cell_progress,
.init_IRQ = cell_init_irq,
.pci_setup_phb = cell_setup_phb,
-#ifdef CONFIG_KEXEC
- .machine_kexec = default_machine_kexec,
- .machine_kexec_prepare = default_machine_kexec_prepare,
- .machine_crash_shutdown = default_machine_crash_shutdown,
-#endif
};
diff --git a/arch/powerpc/platforms/embedded6xx/c2k.c b/arch/powerpc/platforms/embedded6xx/c2k.c
index 32ba0fa..8cab573 100644
--- a/arch/powerpc/platforms/embedded6xx/c2k.c
+++ b/arch/powerpc/platforms/embedded6xx/c2k.c
@@ -20,7 +20,6 @@
#include <linux/seq_file.h>
#include <linux/time.h>
#include <linux/of.h>
-#include <linux/kexec.h>
#include <asm/machdep.h>
#include <asm/prom.h>
@@ -147,9 +146,4 @@ define_machine(c2k) {
.get_irq = mv64x60_get_irq,
.restart = c2k_restart,
.calibrate_decr = generic_calibrate_decr,
-#ifdef CONFIG_KEXEC
- .machine_kexec = default_machine_kexec,
- .machine_kexec_prepare = default_machine_kexec_prepare,
- .machine_crash_shutdown = default_machine_crash_shutdown,
-#endif
};
diff --git a/arch/powerpc/platforms/embedded6xx/prpmc2800.c b/arch/powerpc/platforms/embedded6xx/prpmc2800.c
index 4c485e9..670035f 100644
--- a/arch/powerpc/platforms/embedded6xx/prpmc2800.c
+++ b/arch/powerpc/platforms/embedded6xx/prpmc2800.c
@@ -19,7 +19,6 @@
#include <asm/prom.h>
#include <asm/system.h>
#include <asm/time.h>
-#include <asm/kexec.h>
#include <mm/mmu_decl.h>
@@ -155,9 +154,4 @@ define_machine(prpmc2800){
.get_irq = mv64x60_get_irq,
.restart = prpmc2800_restart,
.calibrate_decr = generic_calibrate_decr,
-#ifdef CONFIG_KEXEC
- .machine_kexec = default_machine_kexec,
- .machine_kexec_prepare = default_machine_kexec_prepare,
- .machine_crash_shutdown = default_machine_crash_shutdown,
-#endif
};
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index d4c61c3..bfd60e4 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -50,7 +50,6 @@
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/io.h>
-#include <asm/kexec.h>
#include <asm/pci-bridge.h>
#include <asm/iommu.h>
#include <asm/machdep.h>
@@ -335,9 +334,4 @@ define_machine(maple) {
.calibrate_decr = generic_calibrate_decr,
.progress = maple_progress,
.power_save = power4_idle,
-#ifdef CONFIG_KEXEC
- .machine_kexec = default_machine_kexec,
- .machine_kexec_prepare = default_machine_kexec_prepare,
- .machine_crash_shutdown = default_machine_crash_shutdown,
-#endif
};
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 1293772..9b78f53 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -60,7 +60,6 @@
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/io.h>
-#include <asm/kexec.h>
#include <asm/pci-bridge.h>
#include <asm/ohare.h>
#include <asm/mediabay.h>
@@ -738,11 +737,6 @@ define_machine(powermac) {
.pci_probe_mode = pmac_pci_probe_mode,
.power_save = power4_idle,
.enable_pmcs = power4_enable_pmcs,
-#ifdef CONFIG_KEXEC
- .machine_kexec = default_machine_kexec,
- .machine_kexec_prepare = default_machine_kexec_prepare,
- .machine_crash_shutdown = default_machine_crash_shutdown,
-#endif
#endif /* CONFIG_PPC64 */
#ifdef CONFIG_PPC32
.pcibios_enable_device_hook = pmac_pci_enable_device_hook,
diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index bfc33fb..35f3e85 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -23,7 +23,6 @@
#include <linux/fs.h>
#include <linux/root_dev.h>
#include <linux/console.h>
-#include <linux/kexec.h>
#include <linux/bootmem.h>
#include <asm/machdep.h>
@@ -281,8 +280,5 @@ define_machine(ps3) {
.halt = ps3_halt,
#if defined(CONFIG_KEXEC)
.kexec_cpu_down = ps3_kexec_cpu_down,
- .machine_kexec = default_machine_kexec,
- .machine_kexec_prepare = default_machine_kexec_prepare,
- .machine_crash_shutdown = default_machine_crash_shutdown,
#endif
};
--
1.5.6.5
prev parent reply other threads:[~2008-12-16 16:23 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-16 16:22 [PATCH 0/3] Kexec for PPC32 (6xx) machines Anton Vorontsov
2008-12-16 16:22 ` [PATCH 1/3] powerpc: Setup OF properties for ppc32 kexec Anton Vorontsov
2008-12-16 16:23 ` [PATCH 2/3] powerpc: Make default kexec/crash_kernel ops implicit Anton Vorontsov
2008-12-21 23:08 ` Michael Ellerman
2008-12-22 0:11 ` Anton Vorontsov
2008-12-23 0:15 ` Michael Ellerman
2008-12-16 16:23 ` Anton Vorontsov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081216162308.GC21749@oksana.dev.rtsoft.ru \
--to=avorontsov@ru.mvista.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=miltonm@bga.com \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).