From: Grant Likely <grant.likely@secretlab.ca>
To: linuxppc-dev@ozlabs.org, hans.lehmann@ritter-elektronik.de,
matt@genesi-usa.com, olaf@aepfle.de
Subject: [PATCH 1/4] powerpc/mpc5200: Bugfix on handling variable sized buffer descriptors
Date: Sun, 21 Dec 2008 01:06:19 -0700 [thread overview]
Message-ID: <20081221080619.29029.11260.stgit@localhost.localdomain> (raw)
In-Reply-To: <20081221080213.29029.7646.stgit@localhost.localdomain>
From: Grant Likely <grant.likely@secretlab.ca>
The buffer descriptors for the ATA BestComm task are larger than the
current definition for bcom_bd. This causes problems because the
various bcom_... functions dereference the buffer descriptor pointer
by using the array operator which doesn't work when the buffer
descriptors are a different size.
This patch adds the bcom_get_bd() function which uses the value in
bcom_task.bd_size to calculate the offset into the BD table. This
patch also changes the definition of bcom_bd to specify a data size
of 0 instead of 1 so that it will never work if anyone attempts to
dereference the bd list as an array (as opposed to something that
might work even though it is wrong).
Finally, this patch moves the definition of bcom_bd up in the file
to eliminate a forward declaration.
Based on patch originally written by Tim Yamin.
Signed-off-by: Tim Yamin <plasm@roo.me.uk>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
arch/powerpc/sysdev/bestcomm/bestcomm.h | 61 +++++++++++++++++++++----------
1 files changed, 42 insertions(+), 19 deletions(-)
diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm.h b/arch/powerpc/sysdev/bestcomm/bestcomm.h
index c960a8b..23a95f8 100644
--- a/arch/powerpc/sysdev/bestcomm/bestcomm.h
+++ b/arch/powerpc/sysdev/bestcomm/bestcomm.h
@@ -16,8 +16,19 @@
#ifndef __BESTCOMM_H__
#define __BESTCOMM_H__
-struct bcom_bd; /* defined later on ... */
-
+/**
+ * struct bcom_bd - Structure describing a generic BestComm buffer descriptor
+ * @status: The current status of this buffer. Exact meaning depends on the
+ * task type
+ * @data: An array of u32 extra data. Size of array is task dependant.
+ *
+ * Note: Don't dereference a bcom_bd pointer as an array. The size of the
+ * bcom_bd is variable. Use bcom_get_bd() instead.
+ */
+struct bcom_bd {
+ u32 status;
+ u32 data[0]; /* variable payload size */
+};
/* ======================================================================== */
/* Generic task management */
@@ -84,17 +95,6 @@ bcom_get_task_irq(struct bcom_task *tsk) {
/* BD based tasks helpers */
/* ======================================================================== */
-/**
- * struct bcom_bd - Structure describing a generic BestComm buffer descriptor
- * @status: The current status of this buffer. Exact meaning depends on the
- * task type
- * @data: An array of u32 whose meaning depends on the task type.
- */
-struct bcom_bd {
- u32 status;
- u32 data[1]; /* variable, but at least 1 */
-};
-
#define BCOM_BD_READY 0x40000000ul
/** _bcom_next_index - Get next input index.
@@ -140,15 +140,31 @@ bcom_queue_full(struct bcom_task *tsk)
}
/**
+ * bcom_get_bd - Get a BD from the queue
+ * @tsk: The BestComm task structure
+ * index: Index of the BD to fetch
+ */
+static inline struct bcom_bd
+*bcom_get_bd(struct bcom_task *tsk, unsigned int index)
+{
+ /* A cast to (void*) so the address can be incremented by the
+ * real size instead of by sizeof(struct bcom_bd) */
+ return ((void *)tsk->bd) + (index * tsk->bd_size);
+}
+
+/**
* bcom_buffer_done - Checks if a BestComm
* @tsk: The BestComm task structure
*/
static inline int
bcom_buffer_done(struct bcom_task *tsk)
{
+ struct bcom_bd *bd;
if (bcom_queue_empty(tsk))
return 0;
- return !(tsk->bd[tsk->outdex].status & BCOM_BD_READY);
+
+ bd = bcom_get_bd(tsk, tsk->outdex);
+ return !(bd->status & BCOM_BD_READY);
}
/**
@@ -160,16 +176,21 @@ bcom_buffer_done(struct bcom_task *tsk)
static inline struct bcom_bd *
bcom_prepare_next_buffer(struct bcom_task *tsk)
{
- tsk->bd[tsk->index].status = 0; /* cleanup last status */
- return &tsk->bd[tsk->index];
+ struct bcom_bd *bd;
+
+ bd = bcom_get_bd(tsk, tsk->index);
+ bd->status = 0; /* cleanup last status */
+ return bd;
}
static inline void
bcom_submit_next_buffer(struct bcom_task *tsk, void *cookie)
{
+ struct bcom_bd *bd = bcom_get_bd(tsk, tsk->index);
+
tsk->cookie[tsk->index] = cookie;
mb(); /* ensure the bd is really up-to-date */
- tsk->bd[tsk->index].status |= BCOM_BD_READY;
+ bd->status |= BCOM_BD_READY;
tsk->index = _bcom_next_index(tsk);
if (tsk->flags & BCOM_FLAGS_ENABLE_TASK)
bcom_enable(tsk);
@@ -179,10 +200,12 @@ static inline void *
bcom_retrieve_buffer(struct bcom_task *tsk, u32 *p_status, struct bcom_bd **p_bd)
{
void *cookie = tsk->cookie[tsk->outdex];
+ struct bcom_bd *bd = bcom_get_bd(tsk, tsk->outdex);
+
if (p_status)
- *p_status = tsk->bd[tsk->outdex].status;
+ *p_status = bd->status;
if (p_bd)
- *p_bd = &tsk->bd[tsk->outdex];
+ *p_bd = bd;
tsk->outdex = _bcom_next_outdex(tsk);
return cookie;
}
next prev parent reply other threads:[~2008-12-21 8:06 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-21 8:06 [PATCH 0/4] powerpc/mpc5200: Add support for ATA DMA Grant Likely
2008-12-21 8:06 ` Grant Likely [this message]
2008-12-21 8:06 ` [PATCH 2/4] powerpc/mpc5200: Bestcomm fixes to ATA support Grant Likely
2008-12-21 8:06 ` [PATCH 3/4] powerpc/mpc5200: Disable bestcomm prefetching when ATA DMA enabled Grant Likely
2008-12-21 8:06 ` [PATCH 4/4] powerpc/mpc5200: Add MDMA/UDMA support to MPC5200 ATA driver Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081221080619.29029.11260.stgit@localhost.localdomain \
--to=grant.likely@secretlab.ca \
--cc=hans.lehmann@ritter-elektronik.de \
--cc=linuxppc-dev@ozlabs.org \
--cc=matt@genesi-usa.com \
--cc=olaf@aepfle.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).