From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Greg Kroah-Hartman <greg@kroah.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
linuxppc-dev@ozlabs.org, Alan Stern <stern@rowland.harvard.edu>,
Andrew Morton <akpm@linux-foundation.org>,
Li Yang <leoli@freescale.com>, Timur Tabi <timur@freescale.com>
Subject: [PATCH 2/6] USB: fsl_qe_udc: Fix recursive locking bug in ch9getstatus()
Date: Thu, 25 Dec 2008 17:15:05 +0300 [thread overview]
Message-ID: <20081225141505.GB6786@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20081225141402.GA30689@oksana.dev.rtsoft.ru>
The call chain is this:
qe_udc_irq() <- grabs the udc->lock spinlock
rx_irq()
qe_ep0_rx()
ep0_setup_handle()
setup_received_handle()
ch9getstatus()
qe_ep_queue() <- tries to grab the udc->lock again
It seems unsafe to temporarily drop the lock in the ch9getstatus(),
so to fix that bug the lock-less __qe_ep_queue() function
implemented and used by the ch9getstatus().
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
---
drivers/usb/gadget/fsl_qe_udc.c | 26 ++++++++++++++++++--------
1 files changed, 18 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index db6fe04..2677c9e 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -1681,14 +1681,11 @@ static void qe_free_request(struct usb_ep *_ep, struct usb_request *_req)
kfree(req);
}
-/* queues (submits) an I/O request to an endpoint */
-static int qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
- gfp_t gfp_flags)
+static int __qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req)
{
struct qe_ep *ep = container_of(_ep, struct qe_ep, ep);
struct qe_req *req = container_of(_req, struct qe_req, req);
struct qe_udc *udc;
- unsigned long flags;
int reval;
udc = ep->udc;
@@ -1732,7 +1729,7 @@ static int qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
list_add_tail(&req->queue, &ep->queue);
dev_vdbg(udc->dev, "gadget have request in %s! %d\n",
ep->name, req->req.length);
- spin_lock_irqsave(&udc->lock, flags);
+
/* push the request to device */
if (ep_is_in(ep))
reval = ep_req_send(ep, req);
@@ -1748,11 +1745,24 @@ static int qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
if (ep->dir == USB_DIR_OUT)
reval = ep_req_receive(ep, req);
- spin_unlock_irqrestore(&udc->lock, flags);
-
return 0;
}
+/* queues (submits) an I/O request to an endpoint */
+static int qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
+ gfp_t gfp_flags)
+{
+ struct qe_ep *ep = container_of(_ep, struct qe_ep, ep);
+ struct qe_udc *udc = ep->udc;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&udc->lock, flags);
+ ret = __qe_ep_queue(_ep, _req);
+ spin_unlock_irqrestore(&udc->lock, flags);
+ return ret;
+}
+
/* dequeues (cancels, unlinks) an I/O request from an endpoint */
static int qe_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
{
@@ -2008,7 +2018,7 @@ static void ch9getstatus(struct qe_udc *udc, u8 request_type, u16 value,
udc->ep0_dir = USB_DIR_IN;
/* data phase */
- status = qe_ep_queue(&ep->ep, &req->req, GFP_ATOMIC);
+ status = __qe_ep_queue(&ep->ep, &req->req);
if (status == 0)
return;
--
1.5.6.5
next prev parent reply other threads:[~2008-12-25 14:15 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-25 14:14 [PATCH 0/6] USB: Fixes for fsl_qe_udc driver Anton Vorontsov
2008-12-25 14:15 ` [PATCH 1/6] USB: fsl_qe_udc: Fix oops on QE UDC probe failure Anton Vorontsov
2008-12-25 14:15 ` Anton Vorontsov [this message]
2008-12-25 14:15 ` [PATCH 3/6] USB: fsl_qe_udc: Fix QE USB controller initialization Anton Vorontsov
2008-12-25 14:15 ` [PATCH 4/6] USB: fsl_qe_udc: Fix disconnects reporting during bus reset Anton Vorontsov
2008-12-25 14:15 ` [PATCH 5/6] USB: fsl_qe_udc: Fix muram corruption by disabled endpoints Anton Vorontsov
2008-12-25 14:15 ` [PATCH 6/6] USB: fsl_qe_udc: Fix stalled TX requests bug Anton Vorontsov
2009-01-07 4:44 ` [PATCH 0/6] USB: Fixes for fsl_qe_udc driver Kumar Gala
2009-01-07 4:53 ` Greg KH
2009-01-13 15:49 ` Kumar Gala
2009-01-13 16:40 ` Greg KH
2009-01-13 17:30 ` Kumar Gala
2009-02-02 15:50 ` Anton Vorontsov
2009-02-04 1:27 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081225141505.GB6786@oksana.dev.rtsoft.ru \
--to=avorontsov@ru.mvista.com \
--cc=akpm@linux-foundation.org \
--cc=dbrownell@users.sourceforge.net \
--cc=greg@kroah.com \
--cc=leoli@freescale.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=stern@rowland.harvard.edu \
--cc=timur@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).