From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from buildserver.ru.mvista.com (unknown [85.21.88.6]) by ozlabs.org (Postfix) with ESMTP id E6D67DDED5 for ; Thu, 22 Jan 2009 12:56:50 +1100 (EST) Date: Thu, 22 Jan 2009 04:56:49 +0300 From: Anton Vorontsov To: Pierre Ossman Subject: [PATCH RFC 0/10] Freescale "eSDHC" SDHCI support (was [PATCH] mmc: Add driver for Freescale eSDHC controllers) Message-ID: <20090122015649.GA6835@oksana.dev.rtsoft.ru> MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Cc: sdhci-devel@list.drzeus.cx, Arnd Bergmann , linux-kernel@vger.kernel.org, Liu Dave , Joe D'Abbraccio , linuxppc-dev@ozlabs.org, Konjin Lai , Ben Dooks , Xie Xiaobo Reply-To: avorontsov@ru.mvista.com List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Thu, Jan 15, 2009 at 07:37:00AM +0800, Liu Dave wrote: > > This patch adds support for the Freescale Enhanced Secure Digital > > Host Controller Interface as found in some Freescale PowerPC > > microprocessors (e.g. MPC837x SOCs). > > The Freescale ESDHC controller is basically compatible with the > standard SDHC controller. but the eshdc expand some bits. > > The esdhc.c is much like the orignal sdhci.c. > it is possible to merge them. Seem to work indeed. Quite a lot of quirks needed though. Patches on the way... -- Anton Vorontsov email: cbouatmailru@gmail.com irc://irc.freenode.net/bd2