From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: David Brownell <dbrownell@users.sourceforge.net>
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org,
spi-devel-general@lists.sourceforge.net,
Andrew Morton <akpm@linux-foundation.org>
Subject: [PATCH 1/6] spi_mpc83xx: Fix sparse warnings
Date: Fri, 23 Jan 2009 22:50:28 +0300 [thread overview]
Message-ID: <20090123195028.GA21237@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20090123194958.GA17355@oksana.dev.rtsoft.ru>
The patch fixes following sparse warnings:
CHECK spi_mpc83xx.c
spi_mpc83xx.c:145:1: warning: symbol 'mpc83xx_spi_rx_buf_u8' was not declared. Should it be static?
spi_mpc83xx.c:146:1: warning: symbol 'mpc83xx_spi_rx_buf_u16' was not declared. Should it be static?
spi_mpc83xx.c:147:1: warning: symbol 'mpc83xx_spi_rx_buf_u32' was not declared. Should it be static?
spi_mpc83xx.c:148:1: warning: symbol 'mpc83xx_spi_tx_buf_u8' was not declared. Should it be static?
spi_mpc83xx.c:149:1: warning: symbol 'mpc83xx_spi_tx_buf_u16' was not declared. Should it be static?
spi_mpc83xx.c:150:1: warning: symbol 'mpc83xx_spi_tx_buf_u32' was not declared. Should it be static?
spi_mpc83xx.c:175:32: warning: incorrect type in initializer (different address spaces)
spi_mpc83xx.c:175:32: expected void *tmp_ptr
spi_mpc83xx.c:175:32: got unsigned int [noderef] <asn:2>*<noident>
spi_mpc83xx.c:183:26: warning: incorrect type in argument 1 (different address spaces)
spi_mpc83xx.c:183:26: expected unsigned int [noderef] [usertype] <asn:2>*reg
spi_mpc83xx.c:183:26: got void *tmp_ptr
spi_mpc83xx.c:184:26: warning: incorrect type in argument 1 (different address spaces)
spi_mpc83xx.c:184:26: expected unsigned int [noderef] [usertype] <asn:2>*reg
spi_mpc83xx.c:184:26: got void *tmp_ptr
spi_mpc83xx.c:287:31: warning: incorrect type in initializer (different address spaces)
spi_mpc83xx.c:287:31: expected void *tmp_ptr
spi_mpc83xx.c:287:31: got unsigned int [noderef] <asn:2>*<noident>
spi_mpc83xx.c:295:25: warning: incorrect type in argument 1 (different address spaces)
spi_mpc83xx.c:295:25: expected unsigned int [noderef] [usertype] <asn:2>*reg
spi_mpc83xx.c:295:25: got void *tmp_ptr
spi_mpc83xx.c:296:25: warning: incorrect type in argument 1 (different address spaces)
spi_mpc83xx.c:296:25: expected unsigned int [noderef] [usertype] <asn:2>*reg
spi_mpc83xx.c:296:25: got void *tmp_ptr
spi_mpc83xx.c:486:13: warning: symbol 'mpc83xx_spi_irq' was not declared. Should it be static?
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
drivers/spi/spi_mpc83xx.c | 16 +++++++++-------
1 files changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c
index ac0e3e4..6ef8937 100644
--- a/drivers/spi/spi_mpc83xx.c
+++ b/drivers/spi/spi_mpc83xx.c
@@ -123,6 +123,7 @@ static inline u32 mpc83xx_spi_read_reg(__be32 __iomem * reg)
}
#define MPC83XX_SPI_RX_BUF(type) \
+static \
void mpc83xx_spi_rx_buf_##type(u32 data, struct mpc83xx_spi *mpc83xx_spi) \
{ \
type * rx = mpc83xx_spi->rx; \
@@ -131,6 +132,7 @@ void mpc83xx_spi_rx_buf_##type(u32 data, struct mpc83xx_spi *mpc83xx_spi) \
}
#define MPC83XX_SPI_TX_BUF(type) \
+static \
u32 mpc83xx_spi_tx_buf_##type(struct mpc83xx_spi *mpc83xx_spi) \
{ \
u32 data; \
@@ -172,7 +174,7 @@ static void mpc83xx_spi_chipselect(struct spi_device *spi, int value)
if (cs->hw_mode != regval) {
unsigned long flags;
- void *tmp_ptr = &mpc83xx_spi->base->mode;
+ __be32 __iomem *mode = &mpc83xx_spi->base->mode;
regval = cs->hw_mode;
/* Turn off IRQs locally to minimize time that
@@ -180,8 +182,8 @@ static void mpc83xx_spi_chipselect(struct spi_device *spi, int value)
*/
local_irq_save(flags);
/* Turn off SPI unit prior changing mode */
- mpc83xx_spi_write_reg(tmp_ptr, regval & ~SPMODE_ENABLE);
- mpc83xx_spi_write_reg(tmp_ptr, regval);
+ mpc83xx_spi_write_reg(mode, regval & ~SPMODE_ENABLE);
+ mpc83xx_spi_write_reg(mode, regval);
local_irq_restore(flags);
}
if (mpc83xx_spi->activate_cs)
@@ -284,7 +286,7 @@ int mpc83xx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
if (cs->hw_mode != regval) {
unsigned long flags;
- void *tmp_ptr = &mpc83xx_spi->base->mode;
+ __be32 __iomem *mode = &mpc83xx_spi->base->mode;
regval = cs->hw_mode;
/* Turn off IRQs locally to minimize time
@@ -292,8 +294,8 @@ int mpc83xx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
*/
local_irq_save(flags);
/* Turn off SPI unit prior changing mode */
- mpc83xx_spi_write_reg(tmp_ptr, regval & ~SPMODE_ENABLE);
- mpc83xx_spi_write_reg(tmp_ptr, regval);
+ mpc83xx_spi_write_reg(mode, regval & ~SPMODE_ENABLE);
+ mpc83xx_spi_write_reg(mode, regval);
local_irq_restore(flags);
}
return 0;
@@ -483,7 +485,7 @@ static int mpc83xx_spi_setup(struct spi_device *spi)
return 0;
}
-irqreturn_t mpc83xx_spi_irq(s32 irq, void *context_data)
+static irqreturn_t mpc83xx_spi_irq(s32 irq, void *context_data)
{
struct mpc83xx_spi *mpc83xx_spi = context_data;
u32 event;
--
1.5.6.5
next prev parent reply other threads:[~2009-01-23 19:50 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-05 20:09 [PATCH 0/7] OpenFirmware support for the spi_mpc83xx driver Anton Vorontsov
2008-12-05 20:10 ` [PATCH 1/7] powerpc: Implement get_brgfreq() and get_baudrate() stubs Anton Vorontsov
2008-12-16 18:24 ` Kumar Gala
2008-12-05 20:10 ` [PATCH 2/7] spi_mpc83xx: Fix sparse warnings Anton Vorontsov
2008-12-05 20:10 ` [PATCH 3/7] spi_mpc83xx: Rework chip selects handling Anton Vorontsov
2008-12-05 20:10 ` [PATCH 4/7] spi_mpc83xx: Add OF platform driver bindings Anton Vorontsov
2008-12-05 20:10 ` [PATCH 5/7] powerpc/fsl_soc: Isolate legacy fsl_spi support to mpc832x_rdb boards Anton Vorontsov
2008-12-05 20:10 ` [PATCH 6/7] powerpc: Add mmc-spi-slot bindings Anton Vorontsov
2008-12-05 20:10 ` [PATCH 7/7] powerpc/83xx: Add mmc-spi support via the device tree for MPC8323E-RDB Anton Vorontsov
2008-12-18 18:33 ` [PATCH 0/7] OpenFirmware support for the spi_mpc83xx driver Anton Vorontsov
2009-01-07 4:28 ` Kumar Gala
2009-01-23 19:49 ` [PATCH resend 0/6] " Anton Vorontsov
2009-01-23 19:50 ` Anton Vorontsov [this message]
2009-01-23 19:50 ` [PATCH 2/6] spi_mpc83xx: Rework chip selects handling Anton Vorontsov
2009-01-23 19:50 ` [PATCH 3/6] spi_mpc83xx: Add OF platform driver bindings Anton Vorontsov
2009-01-23 19:50 ` [PATCH 4/6] powerpc: Add mmc-spi-slot bindings Anton Vorontsov
2009-01-23 19:50 ` [PATCH 5/6] powerpc/83xx: Add mmc-spi support via the device tree for MPC8323E-RDB Anton Vorontsov
2009-01-23 19:50 ` [PATCH 6/6] powerpc/fsl_soc: Isolate legacy fsl_spi support to mpc832x_rdb boards Anton Vorontsov
2009-03-09 16:53 ` [PATCH resend 0/6] OpenFirmware support for the spi_mpc83xx driver Kumar Gala
-- strict thread matches above, loose matches on Subject: below --
2009-03-17 18:59 [PATCH v2 2/2] powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes Anton Vorontsov
2009-03-18 13:21 ` Kumar Gala
2009-03-18 15:28 ` Anton Vorontsov
2009-03-18 15:43 ` Scott Wood
2009-03-18 15:50 ` Grant Likely
2009-03-19 1:20 ` David Gibson
2009-03-18 19:59 ` Anton Vorontsov
2009-03-18 20:00 ` [PATCH v3 1/4] powerpc/83xx: Add power management support for MPC837x boards Anton Vorontsov
2009-03-18 20:00 ` [PATCH v3 2/4] powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes Anton Vorontsov
2009-03-18 20:00 ` [PATCH v3 3/4] powerpc/85xx: " Anton Vorontsov
2009-03-18 20:05 ` Scott Wood
2009-03-18 20:23 ` Anton Vorontsov
2009-03-18 20:27 ` Scott Wood
2009-03-18 20:29 ` Anton Vorontsov
2009-03-18 20:31 ` Scott Wood
2009-03-18 20:33 ` Anton Vorontsov
2009-03-18 20:35 ` Scott Wood
2009-03-18 20:39 ` Anton Vorontsov
2009-03-18 20:46 ` Scott Wood
2009-03-18 21:00 ` Anton Vorontsov
2009-03-18 20:00 ` [PATCH v3 4/4] powerpc/86xx: " Anton Vorontsov
2009-04-08 9:18 ` [PATCH 6/6] powerpc/fsl_soc: Isolate legacy fsl_spi support to mpc832x_rdb boards Peter Korsgaard
2009-04-17 5:13 ` Peter Korsgaard
2009-04-17 12:23 ` Anton Vorontsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090123195028.GA21237@oksana.dev.rtsoft.ru \
--to=avorontsov@ru.mvista.com \
--cc=akpm@linux-foundation.org \
--cc=dbrownell@users.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=spi-devel-general@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).