[PATCH 01/11] sdhci: Add quirk for controllers with no end-of-busy IRQ

[Anton Vorontsov <avorontsov@ru.mvista.com>]

From: Ben Dooks <ben-linux@fluff.org>

The Samsung SDHCI (and FSL eSDHC) controller block seems to fail
to generate an INT_DATA_END after the transfer has completed and
the bus busy state finished.

Changes in e809517f6fa5803a5a1cd56026f0e2190fc13d5c to use the
new busy method are the cause of the behaviour change.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 drivers/mmc/host/sdhci.c |    5 ++++-
 drivers/mmc/host/sdhci.h |    2 ++
 2 files changed, 6 insertions(+), 1 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 6b2d1f9..0a1f5c5 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1291,8 +1291,11 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
 		if (host->cmd->data)
 			DBG("Cannot wait for busy signal when also "
 				"doing a data transfer");
-		else
+		else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ))
 			return;
+
+		/* The controller does not support the end-of-busy IRQ,
+		 * fall through and take the SDHCI_INT_RESPONSE */
 	}
 
 	if (intmask & SDHCI_INT_RESPONSE)
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 3efba23..2d08dd4 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -210,6 +210,8 @@ struct sdhci_host {
 #define SDHCI_QUIRK_BROKEN_SMALL_PIO			(1<<13)
 /* Controller supports high speed but doesn't have the caps bit set */
 #define SDHCI_QUIRK_FORCE_HIGHSPEED			(1<<14)
+/* Controller does not provide transfer-complete interrupt when not busy */
+#define SDHCI_QUIRK_NO_BUSY_IRQ				(1<<15)
 
 	int			irq;		/* Device IRQ */
 	void __iomem *		ioaddr;		/* Mapped address */
-- 
1.5.6.5