From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Pierre Ossman <drzeus-sdhci@drzeus.cx>
Cc: Ben Dooks <ben-linux@fluff.org>, Arnd Bergmann <arnd@arndb.de>,
Liu Dave <DaveLiu@freescale.com>,
linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org,
sdhci-devel@list.drzeus.cx
Subject: [PATCH 04/11] sdhci: Add support for card-detection polling
Date: Fri, 6 Feb 2009 21:06:50 +0300 [thread overview]
Message-ID: <20090206180650.GD11548@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20090206180520.GA16123@oksana.dev.rtsoft.ru>
This patch adds SDHCI_QUIRK_BROKEN_CARD_DETECTION quirk. When specified,
sdhci driver will set MMC_CAP_NEEDS_POLL MMC host capability, and won't
enable card insert/remove interrupts.
This is needed for hosts with unreliable card detection, such as FSL
eSDHC. The original eSDHC driver was tring to "debounce" card-detection
IRQs by reading present state and disabling particular interrupts. But
with this debouncing scheme I noticed that sometimes we miss card
insertion/removal events.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
drivers/mmc/host/sdhci.c | 6 ++++++
drivers/mmc/host/sdhci.h | 2 ++
2 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index b7a79a0..45c5f1f 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -162,6 +162,9 @@ static void sdhci_init(struct sdhci_host *host)
SDHCI_INT_DMA_END | SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE |
SDHCI_INT_ADMA_ERROR;
+ if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
+ intmask &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT);
+
sdhci_writel(host, intmask, SDHCI_INT_ENABLE);
sdhci_writel(host, intmask, SDHCI_SIGNAL_ENABLE);
}
@@ -1684,6 +1687,9 @@ int sdhci_add_host(struct sdhci_host *host)
mmc->f_max = host->max_clk;
mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
+ if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
+ mmc->caps |= MMC_CAP_NEEDS_POLL;
+
if ((caps & SDHCI_CAN_DO_HISPD) ||
(host->quirks & SDHCI_QUIRK_FORCE_HIGHSPEED))
mmc->caps |= MMC_CAP_SD_HIGHSPEED;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 5a5c119..03f035e 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -227,6 +227,8 @@ struct sdhci_host {
#define SDHCI_QUIRK_FORCE_HIGHSPEED (1<<14)
/* Controller does not provide transfer-complete interrupt when not busy */
#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<15)
+/* Controller has unreliable card detection */
+#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<16)
int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
--
1.5.6.5
next prev parent reply other threads:[~2009-02-06 18:06 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-06 18:05 [PATCH RFC 0/11] FSL eSDHC support: second call for comments Anton Vorontsov
2009-02-06 18:06 ` [PATCH 01/11] sdhci: Add quirk for controllers with no end-of-busy IRQ Anton Vorontsov
2009-02-06 18:06 ` [PATCH 02/11] sdhci: Add support for bus-specific IO memory accessors Anton Vorontsov
2009-02-08 20:50 ` Pierre Ossman
2009-02-13 14:40 ` Anton Vorontsov
2009-02-21 15:57 ` Pierre Ossman
2009-03-04 17:46 ` Anton Vorontsov
2009-03-08 14:08 ` Pierre Ossman
2009-02-06 18:06 ` [PATCH 03/11] sdhci: Add type checking for " Anton Vorontsov
2009-02-08 20:53 ` Pierre Ossman
2009-02-06 18:06 ` Anton Vorontsov [this message]
2009-02-08 20:57 ` [PATCH 04/11] sdhci: Add support for card-detection polling Pierre Ossman
2009-02-06 18:06 ` [PATCH 05/11] sdhci: Add support for hosts reporting inverted write-protect state Anton Vorontsov
2009-02-06 18:06 ` [PATCH 06/11] sdhci: Add support for hosts with strict 32 bit addressing Anton Vorontsov
2009-02-06 18:06 ` [PATCH 07/11] sdhci: Add quirk to suppress PIO interrupts during DMA transfers Anton Vorontsov
2009-02-08 21:02 ` Pierre Ossman
2009-02-06 18:06 ` [PATCH 08/11] sdhci: Add support for hosts that don't specify clocks in the cap. register Anton Vorontsov
2009-02-08 21:04 ` Pierre Ossman
2009-02-06 18:06 ` [PATCH 09/11] sdhci: Add set_clock callback Anton Vorontsov
2009-02-08 21:06 ` Pierre Ossman
2009-02-06 18:07 ` [PATCH 10/11] sdhci: Add quirk for Freescale eSDHC controllers Anton Vorontsov
2009-02-08 21:12 ` Pierre Ossman
2009-02-13 14:42 ` Anton Vorontsov
2009-02-06 18:07 ` [PATCH 11/11] mmc: Add OpenFirmware bindings for SDHCI driver Anton Vorontsov
2009-02-08 20:33 ` [PATCH RFC 0/11] FSL eSDHC support: second call for comments Pierre Ossman
-- strict thread matches above, loose matches on Subject: below --
2009-03-05 20:27 [PATCH v2 0/11] FSL eSDHC support Anton Vorontsov
2009-03-05 20:28 ` [PATCH 04/11] sdhci: Add support for card-detection polling Anton Vorontsov
2009-03-16 21:13 [PATCH v3 0/11] FSL eSDHC support Anton Vorontsov
2009-03-16 21:13 ` [PATCH 04/11] sdhci: Add support for card-detection polling Anton Vorontsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090206180650.GD11548@oksana.dev.rtsoft.ru \
--to=avorontsov@ru.mvista.com \
--cc=DaveLiu@freescale.com \
--cc=arnd@arndb.de \
--cc=ben-linux@fluff.org \
--cc=drzeus-sdhci@drzeus.cx \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=sdhci-devel@list.drzeus.cx \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).