From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Pierre Ossman <drzeus-sdhci@drzeus.cx>
Cc: Ben Dooks <ben-linux@fluff.org>, Arnd Bergmann <arnd@arndb.de>,
Liu Dave <DaveLiu@freescale.com>,
linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org,
sdhci-devel@list.drzeus.cx
Subject: [PATCH 05/13] sdhci: Add support for card-detection polling
Date: Fri, 13 Feb 2009 17:47:18 +0300 [thread overview]
Message-ID: <20090213144718.GE23889@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20090213144630.GA13436@oksana.dev.rtsoft.ru>
This patch adds SDHCI_QUIRK_BROKEN_CARD_DETECTION quirk. When specified,
sdhci driver will set MMC_CAP_NEEDS_POLL MMC host capability, and won't
enable card insert/remove interrupts.
This is needed for hosts with unreliable card detection, such as FSL
eSDHC. The original eSDHC driver was tring to "debounce" card-detection
IRQs by reading present state and disabling particular interrupts. But
with this debouncing scheme I noticed that sometimes we miss card
insertion/removal events.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
drivers/mmc/host/sdhci.c | 17 ++++++++++++++---
drivers/mmc/host/sdhci.h | 2 ++
2 files changed, 16 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 2728e90..782fb58 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -167,6 +167,9 @@ static void sdhci_set_card_detection(struct sdhci_host *host, bool enable)
{
u32 irqs = SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT;
+ if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
+ return;
+
if (enable)
sdhci_unmask_irqs(host, irqs);
else
@@ -1110,13 +1113,18 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
host->mrq = mrq;
+ if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
+ goto send;
+
if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)
|| (host->flags & SDHCI_DEVICE_DEAD)) {
host->mrq->cmd->error = -ENOMEDIUM;
tasklet_schedule(&host->finish_tasklet);
- } else
- sdhci_send_command(host, mrq->cmd);
-
+ goto out;
+ }
+send:
+ sdhci_send_command(host, mrq->cmd);
+out:
mmiowb();
spin_unlock_irqrestore(&host->lock, flags);
}
@@ -1742,6 +1750,9 @@ int sdhci_add_host(struct sdhci_host *host)
mmc->f_max = host->max_clk;
mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
+ if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
+ mmc->caps |= MMC_CAP_NEEDS_POLL;
+
if ((caps & SDHCI_CAN_DO_HISPD) ||
(host->quirks & SDHCI_QUIRK_FORCE_HIGHSPEED))
mmc->caps |= MMC_CAP_SD_HIGHSPEED;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 45c8309..b10920d 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -217,6 +217,8 @@ struct sdhci_host {
#define SDHCI_QUIRK_FORCE_HIGHSPEED (1<<14)
/* Controller does not provide transfer-complete interrupt when not busy */
#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<15)
+/* Controller has unreliable card detection */
+#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<16)
int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
--
1.5.6.5
next prev parent reply other threads:[~2009-02-13 14:47 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-13 14:46 [PATCH RFC 0/13] FSL eSDHC support Anton Vorontsov
2009-02-13 14:47 ` [PATCH 01/13] sdhci: Add quirk for controllers with no end-of-busy IRQ Anton Vorontsov
2009-02-13 14:47 ` [PATCH 02/13] sdhci: Add support for bus-specific IO memory accessors Anton Vorontsov
2009-02-13 14:47 ` [PATCH 03/13] sdhci: Split card-detection IRQs management from sdhci_init() Anton Vorontsov
2009-02-21 15:58 ` Pierre Ossman
2009-02-13 14:47 ` [PATCH 04/13] sdhci: Enable only relevant (DMA/PIO) interrupts during transfers Anton Vorontsov
2009-02-13 14:47 ` Anton Vorontsov [this message]
2009-02-21 15:58 ` [PATCH 05/13] sdhci: Add support for card-detection polling Pierre Ossman
2009-03-04 17:49 ` Anton Vorontsov
2009-03-08 14:11 ` Pierre Ossman
2009-03-16 21:05 ` Anton Vorontsov
2009-02-13 14:47 ` [PATCH 06/13] sdhci: Add support for hosts reporting inverted write-protect state Anton Vorontsov
2009-02-13 14:47 ` [PATCH 07/13] sdhci: Add support for hosts with strict 32 bit addressing Anton Vorontsov
2009-02-21 15:58 ` Pierre Ossman
2009-03-04 17:48 ` Anton Vorontsov
2009-03-08 14:17 ` Pierre Ossman
2009-02-13 14:47 ` [PATCH 08/13] sdhci: Add get_{max,timeout}_clock callbacks Anton Vorontsov
2009-02-13 14:47 ` [PATCH 09/13] sdhci: Add set_clock callback and a quirk for nonstandard clocks Anton Vorontsov
2009-02-13 14:47 ` [PATCH 10/13] sdhci: Add quirk for controllers that need small delays for PIO Anton Vorontsov
2009-02-13 14:47 ` [PATCH 11/13] sdhci: Add quirk for controllers that need IRQ re-init after reset Anton Vorontsov
2009-02-13 15:47 ` Laurent Pinchart
2009-02-13 17:30 ` Anton Vorontsov
2009-02-13 14:47 ` [PATCH 12/13] sdhci: Add quirk for controllers with max. block size up to 4096 bytes Anton Vorontsov
2009-02-21 15:58 ` Pierre Ossman
2009-03-04 17:47 ` Anton Vorontsov
2009-03-08 14:21 ` Pierre Ossman
2009-02-13 14:47 ` [PATCH 13/13] mmc: Add OpenFirmware bindings for SDHCI driver Anton Vorontsov
2009-02-17 16:31 ` [PATCH RFC 0/13] FSL eSDHC support Ben Dooks
-- strict thread matches above, loose matches on Subject: below --
2009-02-20 17:32 [PATCH " Anton Vorontsov
2009-02-20 17:33 ` [PATCH 05/13] sdhci: Add support for card-detection polling Anton Vorontsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090213144718.GE23889@oksana.dev.rtsoft.ru \
--to=avorontsov@ru.mvista.com \
--cc=DaveLiu@freescale.com \
--cc=arnd@arndb.de \
--cc=ben-linux@fluff.org \
--cc=drzeus-sdhci@drzeus.cx \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=sdhci-devel@list.drzeus.cx \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).