From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: David Jander To: Klaus Pedersen Subject: Re: MPC5121e, MBX driver, pvr.ko ... Date: Mon, 16 Feb 2009 08:27:33 +0100 References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-15" Message-Id: <200902160827.33338.david.jander@protonic.nl> Cc: Linuxppc-dev List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Friday 06 February 2009 10:03:55 Klaus Pedersen wrote: > Hi David > > I'm also run on a custom board, and using the MBX. > > You need to get the device tree file right. You will see the MBX reserved > the irq 66 in the boot printout. > Instead of using insmod use modprobe. The are 2 versions of rc.pvr. Thanks. I'll try that. Two versions of rc.pvr? Why's that, and where is the other one? > I a early thread about memcpy for G2/G3 cores, you mentioned that you will > have a look at the init. of the dram controller and the prio-manager, did > that give you anything?? Yes it did, and it's a long story, I havn't had persmission to talk about, sorry. I believe I can now say that there should be a new errata from Freescale explaining it all. As of now it's not on their web-site, but it should have been there since last week at least *grrr*. Btw, it has nothing to do with the prio-manager or the DRAM controller whatsoever. Best regards, -- David Jander Protonic Holland.