From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Pierre Ossman <drzeus-sdhci@drzeus.cx>
Cc: Ben Dooks <ben-linux@fluff.org>, Arnd Bergmann <arnd@arndb.de>,
Liu Dave <DaveLiu@freescale.com>,
linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org,
sdhci-devel@list.drzeus.cx
Subject: [PATCH 0/13] FSL eSDHC support
Date: Fri, 20 Feb 2009 20:32:28 +0300 [thread overview]
Message-ID: <20090220173228.GA5091@oksana.dev.rtsoft.ru> (raw)
Hi all,
Some updates for the eSDHC support:
Changes since the third RFC:
- Use uninitialized_var() (suggested by Laurent Pinchart);
- Fixed a bug in eSDHC SDCLK prescaler calculations because of which
we were over-clocking the SDCLK, and that caused CRC errors using some
SD cards;
- Not a change, but some status: SDHS (50 MHz) cards were tested to
NOT work (at least on MPC837x boards) -- this is to be investigated
further. SDHC (> 4 GB) cards were not tested, yet.
Changes since the second RFC:
- Addressed all comments that were raised by Pierre Ossman.
There were too many to mention them all, so here is the link:
http://lkml.org/lkml/2009/2/6/320
Changes since the first RFC:
- Use of_iomap() in sdhci-of.c (suggested by Arnd Bergmann). Also added
Arnd's Acked-by: line for the sdhci-of patch.
- Kconfig help text improved (thanks to Matt Sealey and M. Warner Losh).
- In "sdhci: Add quirk to suppress PIO interrupts during DMA transfers"
patch: sdhci_init() now clears SDHCI_PIO_DISABLED flag, otherwise we
won't disable PIO interrupts after suspend.
- New patch: "sdhci: Add type checking for IO memory accessors"
--
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2
next reply other threads:[~2009-02-20 17:32 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-20 17:32 Anton Vorontsov [this message]
2009-02-20 17:33 ` [PATCH 01/13] sdhci: Add quirk for controllers with no end-of-busy IRQ Anton Vorontsov
2009-02-21 16:05 ` Pierre Ossman
2009-02-23 1:56 ` Ben Dooks
2009-02-20 17:33 ` [PATCH 02/13] sdhci: Add support for bus-specific IO memory accessors Anton Vorontsov
2009-02-20 17:33 ` [PATCH 03/13] sdhci: Split card-detection IRQs management from sdhci_init() Anton Vorontsov
2009-02-20 17:33 ` [PATCH 04/13] sdhci: Enable only relevant (DMA/PIO) interrupts during transfers Anton Vorontsov
2009-02-20 17:33 ` [PATCH 05/13] sdhci: Add support for card-detection polling Anton Vorontsov
2009-02-20 17:33 ` [PATCH 06/13] sdhci: Add support for hosts reporting inverted write-protect state Anton Vorontsov
2009-02-20 17:33 ` [PATCH 07/13] sdhci: Add support for hosts with strict 32 bit addressing Anton Vorontsov
2009-02-20 17:33 ` [PATCH 08/13] sdhci: Add get_{max,timeout}_clock callbacks Anton Vorontsov
2009-02-20 17:33 ` [PATCH 09/13] sdhci: Add set_clock callback and a quirk for nonstandard clocks Anton Vorontsov
2009-02-20 17:33 ` [PATCH 10/13] sdhci: Add quirk for controllers that need small delays for PIO Anton Vorontsov
2009-02-20 17:33 ` [PATCH 11/13] sdhci: Add quirk for controllers that need IRQ re-init after reset Anton Vorontsov
2009-02-20 17:33 ` [PATCH 12/13] sdhci: Add quirk for controllers with max. block size up to 4096 bytes Anton Vorontsov
2009-02-20 17:33 ` [PATCH 13/13] mmc: Add OpenFirmware bindings for SDHCI driver Anton Vorontsov
2009-02-21 16:01 ` [PATCH 0/13] FSL eSDHC support Pierre Ossman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090220173228.GA5091@oksana.dev.rtsoft.ru \
--to=avorontsov@ru.mvista.com \
--cc=DaveLiu@freescale.com \
--cc=arnd@arndb.de \
--cc=ben-linux@fluff.org \
--cc=drzeus-sdhci@drzeus.cx \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=sdhci-devel@list.drzeus.cx \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).