From: Grant Likely <grant.likely@secretlab.ca>
To: linuxppc-dev@ozlabs.org, netdev@vger.kernel.org,
afleming@freescale.com, avorontsov@ru.mvista.com,
davem@davemloft.net, galak@kernel.crashing.org
Subject: [PATCH 7/9] net/ucc_geth: Rework ucc_geth driver to use OF PHY/MDIO helper functions
Date: Wed, 18 Mar 2009 23:00:50 -0600 [thread overview]
Message-ID: <20090319050049.11320.98769.stgit@localhost.localdomain> (raw)
In-Reply-To: <20090319050015.11320.61641.stgit@localhost.localdomain>
From: Grant Likely <grant.likely@secretlab.ca>
This patch simplifies the driver by making use of more common code.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
drivers/net/ucc_geth.c | 27 ++++++---------------------
drivers/net/ucc_geth_mii.c | 17 +++--------------
2 files changed, 9 insertions(+), 35 deletions(-)
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index e879868..45bb627 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -28,6 +28,7 @@
#include <linux/mii.h>
#include <linux/phy.h>
#include <linux/workqueue.h>
+#include <linux/of_mdio.h>
#include <linux/of_platform.h>
#include <asm/uaccess.h>
@@ -1537,35 +1538,19 @@ static int init_phy(struct net_device *dev)
{
struct ucc_geth_private *priv = netdev_priv(dev);
struct device_node *np = priv->node;
- struct device_node *phy, *mdio;
- const phandle *ph;
- char bus_name[MII_BUS_ID_SIZE];
- const unsigned int *id;
+ struct device_node *phy;
struct phy_device *phydev;
- char phy_id[BUS_ID_SIZE];
priv->oldlink = 0;
priv->oldspeed = 0;
priv->oldduplex = -1;
- ph = of_get_property(np, "phy-handle", NULL);
- phy = of_find_node_by_phandle(*ph);
- mdio = of_get_parent(phy);
-
- id = of_get_property(phy, "reg", NULL);
-
+ phy = of_parse_phandle(np, "phy-handle", 0);
+ phydev = of_phy_connect(dev, phy, &adjust_link, 0, priv->phy_interface);
of_node_put(phy);
- of_node_put(mdio);
-
- uec_mdio_bus_name(bus_name, mdio);
- snprintf(phy_id, sizeof(phy_id), "%s:%02x",
- bus_name, *id);
-
- phydev = phy_connect(dev, phy_id, &adjust_link, 0, priv->phy_interface);
-
- if (IS_ERR(phydev)) {
+ if (!phydev) {
printk("%s: Could not attach to PHY\n", dev->name);
- return PTR_ERR(phydev);
+ return -ENODEV;
}
phydev->supported &= (ADVERTISED_10baseT_Half |
diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c
index 0ada4ed..9f2492f 100644
--- a/drivers/net/ucc_geth_mii.c
+++ b/drivers/net/ucc_geth_mii.c
@@ -36,6 +36,7 @@
#include <linux/mii.h>
#include <linux/phy.h>
#include <linux/fsl_devices.h>
+#include <linux/of_mdio.h>
#include <linux/of_platform.h>
#include <asm/io.h>
@@ -135,11 +136,10 @@ static int uec_mdio_probe(struct of_device *ofdev, const struct of_device_id *ma
{
struct device *device = &ofdev->dev;
struct device_node *np = ofdev->node, *tempnp = NULL;
- struct device_node *child = NULL;
struct ucc_mii_mng __iomem *regs;
struct mii_bus *new_bus;
struct resource res;
- int k, err = 0;
+ int err = 0;
new_bus = mdiobus_alloc();
if (NULL == new_bus)
@@ -165,17 +165,6 @@ static int uec_mdio_probe(struct of_device *ofdev, const struct of_device_id *ma
goto reg_map_fail;
}
- for (k = 0; k < 32; k++)
- new_bus->irq[k] = PHY_POLL;
-
- while ((child = of_get_next_child(np, child)) != NULL) {
- int irq = irq_of_parse_and_map(child, 0);
- if (irq != NO_IRQ) {
- const u32 *id = of_get_property(child, "reg", NULL);
- new_bus->irq[*id] = irq;
- }
- }
-
/* Set the base address */
regs = ioremap(res.start, sizeof(struct ucc_mii_mng));
@@ -220,7 +209,7 @@ static int uec_mdio_probe(struct of_device *ofdev, const struct of_device_id *ma
}
}
- err = mdiobus_register(new_bus);
+ err = of_mdiobus_register(new_bus, np);
if (0 != err) {
printk(KERN_ERR "%s: Cannot register as MDIO bus\n",
new_bus->name);
next prev parent reply other threads:[~2009-03-19 5:00 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-19 5:00 [PATCH 1/9] of: add of_parse_phandle() helper for parsing phandle properties Grant Likely
2009-03-19 5:00 ` [PATCH 2/9] phylib: rework to prepare for OF registration of PHYs Grant Likely
2009-03-19 5:05 ` Grant Likely
2009-03-19 5:00 ` [PATCH 3/9] phylib: add *_direct() variants of phy_connect and phy_attach functions Grant Likely
2009-03-19 5:05 ` Grant Likely
2009-03-19 5:00 ` [PATCH 4/9] openfirmware: Add OF phylib support code Grant Likely
2009-03-19 5:06 ` Grant Likely
2009-03-19 5:00 ` [PATCH 5/9] net: make mpc5200 fec driver use of_mdio infrastructure Grant Likely
2009-03-19 5:06 ` Grant Likely
2009-03-19 5:00 ` [PATCH 6/9] net/gianfar: Rework gianfar driver to use OF PHY/MDIO helper functions Grant Likely
2009-03-19 5:07 ` Grant Likely
2009-03-19 5:00 ` Grant Likely [this message]
2009-03-19 5:07 ` [PATCH 7/9] net/ucc_geth: Rework ucc_geth " Grant Likely
2009-03-19 5:00 ` [PATCH 8/9] net/pasemi_mac: Rework pasemi_mac driver to use of_mdio infrastructure Grant Likely
2009-03-19 5:07 ` Grant Likely
2009-03-19 5:01 ` [PATCH 9/9] net/fs_enet: Rework fs_enet " Grant Likely
2009-03-19 5:07 ` Grant Likely
2009-03-19 5:42 ` David Miller
2009-03-19 6:11 ` Grant Likely
2009-03-19 5:05 ` [PATCH 1/9] of: add of_parse_phandle() helper for parsing phandle properties Grant Likely
2009-03-19 5:07 ` Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090319050049.11320.98769.stgit@localhost.localdomain \
--to=grant.likely@secretlab.ca \
--cc=afleming@freescale.com \
--cc=avorontsov@ru.mvista.com \
--cc=davem@davemloft.net \
--cc=galak@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).