linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Grant Likely <grant.likely@secretlab.ca>
To: netdev@vger.kernel.org, linuxppc-dev@ozlabs.org
Cc: olof@lixom.net, afleming@freescale.com,
	Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Subject: [PATCH 02/14] net/fec_mpc52xx: Migrate to net_device_ops.
Date: Tue, 31 Mar 2009 02:26:54 -0600	[thread overview]
Message-ID: <20090331082654.1427.66471.stgit@localhost.localdomain> (raw)
In-Reply-To: <20090331075537.1427.7819.stgit@localhost.localdomain>

From: Grant Likely <grant.likely@secretlab.ca>

Since not using net_device_ops gets you shunned out the cool crowd,
this patch modifies the fec_mpc52xx Ethernet driver to provide the
management hooks via a struct net_device_ops.

Reported-by: Henk Stegeman <henk.stegeman@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---

 drivers/net/fec_mpc52xx.c |   35 +++++++++++++++++++----------------
 1 files changed, 19 insertions(+), 16 deletions(-)


diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index f99463f..75d0569 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -371,7 +371,7 @@ static int mpc52xx_fec_close(struct net_device *dev)
  * invariant will hold if you make sure that the netif_*_queue()
  * calls are done at the proper times.
  */
-static int mpc52xx_fec_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static int mpc52xx_fec_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct mpc52xx_fec_priv *priv = netdev_priv(dev);
 	struct bcom_fec_bd *bd;
@@ -379,7 +379,7 @@ static int mpc52xx_fec_hard_start_xmit(struct sk_buff *skb, struct net_device *d
 	if (bcom_queue_full(priv->tx_dmatsk)) {
 		if (net_ratelimit())
 			dev_err(&dev->dev, "transmit queue overrun\n");
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	spin_lock_irq(&priv->lock);
@@ -400,7 +400,7 @@ static int mpc52xx_fec_hard_start_xmit(struct sk_buff *skb, struct net_device *d
 
 	spin_unlock_irq(&priv->lock);
 
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
@@ -890,6 +890,21 @@ static int mpc52xx_fec_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 	return mpc52xx_fec_phy_mii_ioctl(priv, if_mii(rq), cmd);
 }
 
+static const struct net_device_ops mpc52xx_fec_netdev_ops = {
+	.ndo_open = mpc52xx_fec_open,
+	.ndo_stop = mpc52xx_fec_close,
+	.ndo_start_xmit = mpc52xx_fec_start_xmit,
+	.ndo_set_multicast_list = mpc52xx_fec_set_multicast_list,
+	.ndo_set_mac_address = mpc52xx_fec_set_mac_address,
+	.ndo_validate_addr = eth_validate_addr,
+	.ndo_do_ioctl = mpc52xx_fec_ioctl,
+	.ndo_tx_timeout = mpc52xx_fec_tx_timeout,
+	.ndo_get_stats = mpc52xx_fec_get_stats,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller = mpc52xx_fec_poll_controller,
+#endif
+};
+
 /* ======================================================================== */
 /* OF Driver                                                                */
 /* ======================================================================== */
@@ -934,22 +949,10 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
 		return -EBUSY;
 
 	/* Init ether ndev with what we have */
-	ndev->open		= mpc52xx_fec_open;
-	ndev->stop		= mpc52xx_fec_close;
-	ndev->hard_start_xmit	= mpc52xx_fec_hard_start_xmit;
-	ndev->do_ioctl		= mpc52xx_fec_ioctl;
+	ndev->netdev_ops	= &mpc52xx_fec_netdev_ops;
 	ndev->ethtool_ops	= &mpc52xx_fec_ethtool_ops;
-	ndev->get_stats		= mpc52xx_fec_get_stats;
-	ndev->set_mac_address	= mpc52xx_fec_set_mac_address;
-	ndev->set_multicast_list = mpc52xx_fec_set_multicast_list;
-	ndev->tx_timeout	= mpc52xx_fec_tx_timeout;
 	ndev->watchdog_timeo	= FEC_WATCHDOG_TIMEOUT;
 	ndev->base_addr		= mem.start;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	ndev->poll_controller = mpc52xx_fec_poll_controller;
-#endif
-
-	priv->t_irq = priv->r_irq = ndev->irq = NO_IRQ; /* IRQ are free for now */
 
 	spin_lock_init(&priv->lock);
 

  parent reply	other threads:[~2009-03-31  8:26 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-03-31  8:26 [PATCH 00/14] Add common OF device tree support for MDIO busses Grant Likely
2009-03-31  8:26 ` [PATCH 01/14] of: add of_parse_phandle() helper for parsing phandle properties Grant Likely
2009-03-31  8:26 ` Grant Likely [this message]
2009-03-31  8:26 ` [PATCH 03/14] net/fec_mpc52xx: Don't dereference phy_device if it is NULL Grant Likely
2009-03-31  8:27 ` [PATCH 04/14] phylib: rework to prepare for OF registration of PHYs Grant Likely
2009-03-31  8:27 ` [PATCH 05/14] phylib: add *_direct() variants of phy_connect and phy_attach functions Grant Likely
2009-04-15 21:10   ` Andy Fleming
2009-04-18  6:08     ` Grant Likely
2009-04-18  6:18       ` Grant Likely
2009-03-31  8:27 ` [PATCH 06/14] openfirmware: Add OF phylib support code Grant Likely
2009-03-31  8:27 ` [PATCH 07/14] net: Rework mpc5200 fec driver to use of_mdio infrastructure Grant Likely
2009-03-31  8:27 ` [PATCH 08/14] net: rework fsl_pq_mdio " Grant Likely
2009-03-31  8:27 ` [PATCH 09/14] net: Rework gianfar " Grant Likely
2009-04-15 23:01   ` Andy Fleming
2009-04-18  6:34     ` Grant Likely
2009-03-31  8:27 ` [PATCH 10/14] net: Rework ucc_geth " Grant Likely
2009-03-31  8:27 ` [PATCH 11/14] net: Rework pasemi_mac " Grant Likely
2009-03-31  8:27 ` [PATCH 12/14] powerpc/82xx: Rework Embedded Planet ep8248e platform to use of_mdio Grant Likely
2009-03-31  8:27 ` [PATCH 13/14] net: Rework fs_enet driver to use of_mdio infrastructure Grant Likely
2009-03-31  8:27 ` [PATCH 14/14] net: add Xilinx ll_temac device driver Grant Likely
2009-03-31 21:57 ` [PATCH 00/14] Add common OF device tree support for MDIO busses David Miller
2009-03-31 22:19   ` Grant Likely
2009-03-31 22:22     ` David Miller
2009-04-01  1:45       ` Grant Likely
2009-04-01  3:38         ` David Miller
2009-04-01  4:56           ` Grant Likely
2009-04-01  5:16             ` David Miller
2009-04-01  5:21               ` Grant Likely
2009-04-15 23:06 ` Andy Fleming

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090331082654.1427.66471.stgit@localhost.localdomain \
    --to=grant.likely@secretlab.ca \
    --cc=Joakim.Tjernlund@transmode.se \
    --cc=afleming@freescale.com \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=netdev@vger.kernel.org \
    --cc=olof@lixom.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).