From: Wolfgang Grandegger <wg@grandegger.com>
To: linuxppc-dev@ozlabs.org
Cc: devicetree-discuss@ozlabs.org
Subject: [PATCH 6/8] --- arch/powerpc/boot/dts/socrates.dts | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
Date: Tue, 31 Mar 2009 14:37:33 +0200 [thread overview]
Message-ID: <20090331124036.057237866@denx.de> (raw)
In-Reply-To: 20090331123727.853787299@denx.de
Index: linux-2.6/arch/powerpc/boot/dts/socrates.dts
===================================================================
--- linux-2.6.orig/arch/powerpc/boot/dts/socrates.dts 2009-03-31 13:24:38.078719288 +0200
+++ linux-2.6/arch/powerpc/boot/dts/socrates.dts 2009-03-31 13:47:56.986720719 +0200
@@ -52,6 +52,7 @@
soc8544@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
+ device_type = "soc";
ranges = <0x00000000 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00001000>; // CCSRBAR 1M
@@ -78,10 +79,11 @@
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
- compatible = "fsl-i2c";
+ compatible = "fsl,mpc8544-i2c", "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
+ clock-frequency = <103000>;
dfsrr;
dtt@28 {
@@ -110,10 +112,12 @@
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
- compatible = "fsl-i2c";
+ compatible = "fsl,mpc8544-i2c", "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
+ fsl,preserve-clocking;
+ clock-frequency = <400000>;
dfsrr;
};
@@ -207,6 +211,7 @@
compatible = "fsl,mpc8548-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
+ fsl,has-sec-cfg;
};
mpic: pic@40000 {
next prev parent reply other threads:[~2009-03-31 12:37 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-31 12:37 [PATCH 0/8] powerpc: i2c-mpc: make I2C bus speed configurable Wolfgang Grandegger
2009-03-31 12:37 ` [PATCH 1/8] [PATCH 3/4] powerpc/85xx: Move gianfar mdio nodes under the Wolfgang Grandegger
2009-03-31 12:37 ` [PATCH 2/8] [PATCH 01/28] RTC: Add support for RX8025 chip Wolfgang Grandegger
2009-03-31 12:37 ` [PATCH 3/8] powerpc/85xx: Add support for the "socrates" board (MPC8544) Wolfgang Grandegger
2009-03-31 15:57 ` Grant Likely
2009-03-31 19:20 ` Wolfgang Grandegger
2009-03-31 12:37 ` [PATCH 4/8] powerpc: i2c-mpc: preserve I2C clocking Wolfgang Grandegger
2009-03-31 12:37 ` [PATCH 5/8] powerpc: i2c-mpc: make I2C bus speed configurable Wolfgang Grandegger
2009-03-31 15:41 ` Grant Likely
2009-04-01 7:51 ` Wolfgang Grandegger
2009-04-01 13:30 ` Grant Likely
2009-04-01 13:41 ` Wolfgang Grandegger
2009-04-01 13:55 ` Wolfgang Grandegger
2009-04-01 13:55 ` Grant Likely
2009-04-02 6:55 ` Wolfgang Grandegger
2009-03-31 12:37 ` Wolfgang Grandegger [this message]
2009-03-31 23:04 ` [PATCH 6/8] --- arch/powerpc/boot/dts/socrates.dts | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) David Gibson
2009-04-01 7:31 ` Wolfgang Grandegger
2009-04-01 11:09 ` David Gibson
2009-04-01 11:59 ` Wolfgang Grandegger
2009-04-01 23:57 ` David Gibson
2009-04-01 12:30 ` Anton Vorontsov
2009-04-01 23:58 ` David Gibson
2009-03-31 12:37 ` [PATCH 7/8] Re: [PATCH 1/2] NAND: Add support for oob size 128 Wolfgang Grandegger
2009-03-31 12:37 ` [PATCH 8/8] NAND: Add support for NAND on the Socrates board Wolfgang Grandegger
2009-03-31 12:49 ` [PATCH 0/8] powerpc: i2c-mpc: make I2C bus speed configurable Wolfgang Grandegger
2009-03-31 16:23 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090331124036.057237866@denx.de \
--to=wg@grandegger.com \
--cc=devicetree-discuss@ozlabs.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).