From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Anatolij Gustschin <agust@denx.de>
Cc: linuxppc-dev@ozlabs.org
Subject: Re: [PATCH] powerpc: 85xx: Add PHY fixup to socrates board code
Date: Tue, 7 Apr 2009 18:30:11 +0400 [thread overview]
Message-ID: <20090407143011.GA15727@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <1239113988-4579-1-git-send-email-agust@denx.de>
On Tue, Apr 07, 2009 at 04:19:48PM +0200, Anatolij Gustschin wrote:
> If the firmware missed to initialize the PHY correctly,
> Linux may hang up on socrates while eth0/eth1 interface
> startup (caused by continuous unacknowledged PHY interrupt).
>
> This patch adds PHY fixup to socrates platform code to
> ensure the PHY is pre-initialized correctly. It is needed
> to be compatible with older firmware.
Is that really board-specific fixup, or can it be placed
somewhere inside drivers/net/phy/marvell.c?
Has this fixup any effect after phy power down/up sequence?
Otherwise you may encounter same problem after suspend/resume.
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> ---
> arch/powerpc/platforms/85xx/socrates.c | 18 ++++++++++++++++++
> 1 files changed, 18 insertions(+), 0 deletions(-)
>
> diff --git a/arch/powerpc/platforms/85xx/socrates.c b/arch/powerpc/platforms/85xx/socrates.c
> index d0e8443..2275a39 100644
> --- a/arch/powerpc/platforms/85xx/socrates.c
> +++ b/arch/powerpc/platforms/85xx/socrates.c
> @@ -28,6 +28,7 @@
> #include <linux/delay.h>
> #include <linux/seq_file.h>
> #include <linux/of_platform.h>
> +#include <linux/phy.h>
>
> #include <asm/system.h>
> #include <asm/time.h>
> @@ -78,6 +79,21 @@ static void __init socrates_pic_init(void)
> of_node_put(np);
> }
>
> +static int socrates_m88e1121_fixup(struct phy_device *phydev)
> +{
> + int err;
> +
> + err = phy_write(phydev, 0x12, 0);
Do you know the proper names for 0x12 and 0x13 registers
on that chip?
> + if (err < 0)
> + return err;
> +
> + err = phy_read(phydev, 0x13);
> + if (err < 0)
> + return err;
> +
> + return 0;
> +}
> +
> /*
> * Setup the architecture
> */
> @@ -105,6 +121,8 @@ static struct of_device_id __initdata socrates_of_bus_ids[] = {
> static void __init socrates_init(void)
> {
> of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
> + phy_register_fixup_for_uid(0x1410cb0, 0xffffff0,
> + socrates_m88e1121_fixup);
> }
>
> /*
> --
> 1.5.6.3
Thanks,
--
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2
next prev parent reply other threads:[~2009-04-07 14:30 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-07 14:19 [PATCH] powerpc: 85xx: Add PHY fixup to socrates board code Anatolij Gustschin
2009-04-07 14:30 ` Anton Vorontsov [this message]
2009-04-07 17:24 ` Anatolij Gustschin
2009-04-07 18:09 ` Anton Vorontsov
2009-04-07 18:40 ` Anton Vorontsov
2009-04-21 17:19 ` [PATCH v2] " Anatolij Gustschin
2009-04-21 21:54 ` Kumar Gala
2009-04-21 22:04 ` Kumar Gala
2009-04-21 23:24 ` Anatolij Gustschin
2009-06-16 13:46 ` Kumar Gala
2009-06-23 10:15 ` Anatolij Gustschin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090407143011.GA15727@oksana.dev.rtsoft.ru \
--to=avorontsov@ru.mvista.com \
--cc=agust@denx.de \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).